Texas Instruments

LM5122MHE/NOPB is a 3–65V wide input, current-mode synchronous boost controller with multiphase capability. Supports PWM control, up to 100V output, 12V nominal input. From $1.54, in stock with worldwide shipping.

LM5122MH/NOPB is a current-mode PWM boost controller from Texas Instruments, supporting 3V–65V input, up to 100V output, in a 20-pin SOIC package. From $1.42 in stock, worldwide shipping.

Use the download button to access the LM5118Q1MH/NOPB schematic symbol, PCB footprint, and 3D model.

DC-DC Controller StepUp/Down 75V TSSOP20 LM5118MH/NOPB, DC-DC Controller, 75 V, 500 kHz, 20-Pin, TSSOP EP

DRV8880PWPR is a 2A stepper motor driver IC with 1/16 microstepping indexer, smart tuning auto-torque and auto-decay technology, and STEP/DIR control interface. Features 2.5A peak output current, integrated protection circuits, and 28-pin TSSOP package. From $1.80 in stock with worldwide shipping.

CD4069UBM96 is a CMOS hex inverter logic IC by Texas Instruments, featuring 6 independent NOT gates with wide supply voltage range (3V to 15V). Key specs: 6-channel inverter, CMOS technology, SOP-14 package. From $0.21, in stock with worldwide shipping.

CD4069UBPW is a hex inverter CMOS logic IC by Texas Instruments in a 14-pin TSSOP package. Key specs: 3V to 18V supply voltage, unbuffered inverter outputs, and rail-to-rail logic swing. From stock, in stock with worldwide shipping.

CD4069UBM is a CMOS Hex Inverter IC featuring 6 single-input NOT gates, operating from 3V to 18V supply voltage with 50pF load capacitance and 6.8mA output current. From $0.139 in stock worldwide shipping.

DIP-8

Use the download button to access the LF411CD schematic symbol, PCB footprint, and 3D model.

Low Offset, Low Drift JFET Input Operational Amplifier

INA226AIDGSR is a 36V bi-directional, ultra-high accuracy I2C current and power monitor from Texas Instruments. It measures shunt voltage with 16-bit resolution, supports programmable alert thresholds, and operates from 2.7V to 5.5V supply. From $1.11 in stock with worldwide shipping.

36-V, Bi-Directional, Ultra-High Accuracy, Low-/High-Side, I2C Out Current/Power Monitor w/ Alert

Motor / Motion / Ignition Controllers & Drivers 12-V to 24-V Bidirectional Full Bridge Brushed DC Motor Gate Driver 24-VQFN -40 to 125

The DRV8881EPWPR is a dual H-bridge stepper motor driver IC from Texas Instruments supporting up to 2 A per channel with integrated smart tuning technology. It features both PWM and PH/EN control interfaces, operates from 8.2 V to 45 V, and comes in a 28-pin TSSOP package for compact designs.

The DRV8881PPWPR is a half-bridge brushed DC motor controller from Texas Instruments in a TSSOP-28 package. It delivers up to 2.5 A output current with integrated protection features for reliable motor drive applications. From $4.63 in stock with worldwide shipping.

DRV8872DDAR is a half-bridge brushed DC motor controller IC from Texas Instruments, featuring 3.7A peak output current, integrated current sensing, and fault protection. Ideal for robotics and industrial motor drive applications. From $0.66, in stock worldwide shipping.

Automotive, 36-V Prog. Gain, Bi-Directional, Zero-Drift, High-Speed Voltage Out Current Sense Amp

DLPC910ZYR is a high-performance DLP display controller IC by Texas Instruments, designed for advanced spatial light modulator applications. Key specs: supports high-speed DMD interfaces, multi-channel digital video input, and flexible illumination control. From $567.39, in stock with worldwide shipping.

Use the download button to access the TPS54560DDAR schematic symbol, PCB footprint, and 3D model.

Operational Amplifiers - Op Amps Operational Amplifier 8-CDIP -55 to 125

-20V, P ch NexFET MOSFET™, dual Common Source WLP 1.5x1.5, 27mOhm

Use the download button to access the UA79M08CKVURG3 schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TUSB4041IPAPR schematic symbol, PCB footprint, and 3D model.

MCU 16-bit/32-bit Hercules TMS570 ARM Cortex R4F RISC 2048KB Flash 1.5V/3.3V Automotive 337-Pin NFBGA

Automotive Qualified SIMPLE SWITCHER® 3.5 to 60V, 1A Synchronous Step-Down Voltage Converter

Voltage Regulators - Switching Regulators 3-17V 0.5A Automotiv Step-Down Converter

AEC-Q100 Qualified SIMPLE SWITCHER® 3.5 to 60V 0.5A Synchronous Step-Down Voltage Converter

Octal Buffers And Line Drivers With 3-State Outputs

Use the download button to access the SN74LS241NSR schematic symbol, PCB footprint, and 3D model.

SN74LS240DBR is an octal bus driver IC with inverting outputs and active-low enable control, featuring 45pF load capacitance and 24mA output current. From $0.66 in stock with worldwide shipping.

Octal buffers and line drivers

Octal buffers and line drivers

OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS

Octal Buffers/Drivers With 3-State Outputs

OCTAL BUFFER/BUS DRIVERS

SN74ALS540NSR is an octal bus driver/buffer IC with 3-state outputs from Texas Instruments, part of the ALS logic family with dual output enable and unidirectional data flow. Key specs: 8-bit bus driving, active-low enable control, 50 pF load capacitance in 20-pin SOIC package. Available in stock worldwide with fast shipping.

Octal Buffers/Drivers With 3-State Outputs

6MHz 750mA adjustable step-down DC-DC converter with bypass mode, 2.7V to 5.5V input, 0.4V to 3.6V output, PWM control. From $0.703, in stock, worldwide shipping.

Quadruple Operational Amplifier

TPS92512HVDGQR is a 2.5A buck current regulator IC designed for LED lighting applications. It supports up to 45V input voltage with high-voltage operation and analog/PWM dimming control. From $0.81, in stock worldwide shipping.

DaVinci Digital Media Processor

PanelBus DVI Receiver

The V62/09627-01XE is a PanelBus DVI Receiver display interface IC from Texas Instruments, designed to receive and decode DVI digital video signals for flat panel display applications. It integrates all necessary functions in a single 100-pin TQFP package with thermal pad. Available as an RoHS-compliant, lead-free component with worldwide stock and shipping.