DS96176CN Texas Instruments Integrated Circuit (Dual-In-Line Packages) In Stock
DS96176CN is a single-channel EIA-422-A and EIA-485 line transceiver with differential Schmitt trigger input and tristate receiver output in a DIP-8 package. It supports half-duplex common I/O bus operation with 1 driver and 1 receiver. Available in stock with worldwide shipping.
- Manufacturer
- Texas Instruments
- Package
- Dual-In-Line Packages
- Pin Count
- 8
- Lifecycle
- OBSOLETE
- Datasheet
- DS96176CN Datasheet PDF
- Category
- Integrated Circuit
- Temp Range
- ?°C to 70.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Differential Schmitt trigger receiver input improves noise immunity on long RS-485 and RS-422 cable runs
- Tristate receiver output and common I/O pin enable half-duplex multidrop bus topologies with up to 32 unit loads
- 1 receiver remains active under driver shutdown, allowing bus monitoring without transmitting
Applications
DS96176CN is used in industrial RS-485 multidrop networks connecting PLCs, sensors, and HMI panels over distances up to 1200 m at low baud rates. It fits legacy DIP-8 footprints on through-hole PCBs in factory automation equipment and instrumentation requiring EIA-422-A point-to-point wiring. Its common I/O architecture also suits half-duplex Modbus RTU implementations in building automation controllers.
Specifications
| Pbfree Code | No |
| YTEOL | 0 |
| Additional Feature | COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER |
| Differential Output | YES |
| Driver Number of Bits | 1 |
| High Level Input Current-Max | 0.00002A |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Interface IC Type | LINE TRANSCEIVER |
| Interface Standard | EIA-422-A; EIA-485 |
| JESD-30 Code | R-PDIP-T8 |
| JESD-609 Code | e0 |
| Number of Functions | 1 |
| Out Swing-Min | 1.5V |
| Output Low Current-Max | 0.016A |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | DIP8,.3 |
| Package Shape | RECTANGULAR |
| Package Style | IN-LINE |
| Qualification Status | Not Qualified |
| Receive Delay-Max | 25ns |
| Receiver Number of Bits | 1 |
| Supply Current-Max | 40mA |
| Supply Voltage-Max | 5.25V |
| Supply Voltage-Min | 4.75V |
| Supply Voltage-Nom | 5V |
| Surface Mount | NO |
| Technology | BIPOLAR |
| Temperature Grade | COMMERCIAL |
| Terminal Finish | TIN LEAD |
| Terminal Form | THROUGH-HOLE |
| Terminal Pitch | 2.54mm |
| Terminal Position | DUAL |
| Transmit Delay-Max | 25ns |
| Package | Dual-In-Line Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.60 |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What bus standards does DS96176CN support, and what cable lengths are achievable?
DS96176CN supports EIA-422-A and EIA-485 differential bus standards. At data rates up to 100 kbps, cable lengths of up to 1200 m are achievable. The differential Schmitt trigger input provides at least 200 mV hysteresis, improving signal integrity on long industrial cable runs with significant common-mode noise.
How many unit loads can DS96176CN drive on a shared RS-485 bus?
DS96176CN presents 1 unit load to the RS-485 bus, allowing up to 32 devices to share a single twisted-pair segment without exceeding the bus drive capability. With 1/8 unit-load compatible transceivers, the same bus can support up to 256 nodes, making DS96176CN suitable for legacy Modbus RTU networks requiring broad device counts.
Why does DS96176CN keep 1 receiver active when the driver is shut down?
Keeping 1 receiver active under shutdown allows the host MCU or UART to monitor RS-485 bus traffic without asserting a driver output. This is critical in half-duplex Modbus RTU systems where the master must verify its own transmitted bytes are echoed back correctly at 9600 baud or higher, and where collision detection requires continuous bus listening.
Is DS96176CN RoHS compliant, and what package does it use for through-hole designs?
DS96176CN is not RoHS compliant and uses a standard 8-pin PDIP through-hole package with 2.54 mm lead pitch. The 8-pin DIP format fits solderless breadboards and legacy PCB designs requiring through-hole reliability, such as harsh-environment industrial controllers where solder joint durability under vibration exceeds 5 g acceleration is needed.
Related Guides
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
Why Buy from FindMyChip
About Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”