Texas Instruments

QUADRUPLE FET BUS SWITCH 2.5-V/3.3-V LOW-VOLTAGE BUS SWITCH WITH 5-V-TOLERANT LEVEL SHIFTER

99dB SNR Stereo ADC With Single-Ended Inputs

1.4A Bipolar Stepper Motor Driver with On-Chip 1/32 Microstepping Indexer (Step/Dir Ctrl)

5.5-V, 4-A 13mΩ load switch with adjustable rise time and optional quick output discharge

System-Side Impedance-Track Fuel Gauge With Direct Battery Connection

System-Side Impedance-Track Fuel Gauge With Direct Battery Connection

1.2V, 10 bit 240KSPS, Serial ADC

Texas Instruments LM7812CT/NOPB Positive Voltage Regulator, 1A, 12 V 3-Pin, TO-220

TEXAS INSTRUMENTS - TLV431BCDBVTE4 - VOLTAGE REF, SHUNT, 1.24V-6V, SOT-23-5

Use the download button to access the TLC5947RHBT schematic symbol, PCB footprint, and 3D model.

QUADRUPLE LINE DRIVERS

TEXAS INSTRUMENTS - LM27313XMFX/NOPB - DC/DC CONV, BUCK, 1.6MHZ, SOT-23

Dual, Low Offset, Rail-to-Rail I/O Operational Amplifier

Dual, Low Offset, Rail-to-Rail I/O Operational Amplifier

Battery Fuel Gauge with Integrated Protector for 1-2 Series Packs

30V, N ch NexFET MOSFET™, single SON5x6, 5.8mOhm

CSD18531Q5A is a 60 V N-channel NexFET power MOSFET in 5 mm × 6 mm SON-8 from Texas Instruments. Key specs: 100 A continuous ID, 5.8 mΩ Rds(on) max @ Vgs=10 V, logic-level gate, avalanche-rated. From $1.40, in stock with worldwide shipping.

Use the download button to access the CSD18537NQ5A schematic symbol, PCB footprint, and 3D model.

Use the download button to access the CSD19537Q3 schematic symbol, PCB footprint, and 3D model.

OCTAL GENERAL-PURPOSE INTERFACE BUS TRANSCEIVER

OCTAL GENERAL-PURPOSE INTERFACE BUS TRANSCEIVERS

SN75160BDW is an octal IEEE-488 general-purpose interface bus transceiver with Schmitt trigger inputs, supporting 8-bit bidirectional data transfer. Features tri-state outputs and operates from a single 5V supply. Available from $3.10 with worldwide shipping.

Use the download button to access the TPS82130SILT schematic symbol, PCB footprint, and 3D model.

Use the download button to access the LM334Z/LFT1 schematic symbol, PCB footprint, and 3D model.

Use the download button to access the LM2937ET-3.3/NOPB schematic symbol, PCB footprint, and 3D model.

400mA and 500mA Voltage Regulator

LDO Voltage Regulators 500 mA Low Dropout Regulator 4-SOT-223 -40 to 85

Texas Instruments LM2937IMP-8.0/NOPB, LDO Regulator, 400mA, 8 V, 5%, 0 → 26 Vin 3+Tab-Pin, SOT-223

500mA,5V,LDO Voltage Reg.,LM2937ET-5.0 Texas Instruments LM2937ET-5.0/NOPB, LDO Voltage Regulator, 0.5A, 5 V /-5%, 3-Pin TO-220

500 mA Low Dropout Regulator

Use the download button to access the SN74ACT2228DW schematic symbol, PCB footprint, and 3D model.

Logic Gates Quad 2-input Exclusive-OR gates

WLAN+BTCombo Module IEEE 802.11b/g/n Bluetooth v4.0(BLE) + EDR 100-Pin QFM

Bluetooth, WiFi 802.11b/g/n, Bluetooth 4.2 Transceiver Module 2.4GHz Surface Mount

Battery Management 2-4S Overvoltage Protector with LDO Output 8-WSON -40 to 110

BQ294700DSGT is a lithium-ion battery protection IC from Texas Instruments featuring accurate cell-by-cell voltage monitoring, up to 20V input, in a compact Small Outline No-lead package. From $0.478, in stock with worldwide shipping.

CC2564MODACMOG is a Texas Instruments Bluetooth dual-mode module supporting Bluetooth 4.0 with a supply voltage range of 2.2V to 4.8V and 14 parametric specs. From $9.29 in stock worldwide shipping.

60mA Charge Pump Voltage Inverter with Fixed 20kHz Operation

Automotive Unregulated 60mA Charge Pump Voltage Inverter

Regulated 200mA, 3.3V high power low noise charge pump DC/DC converter

Regulated 3.0-V High Efficiency Charge Pump With Low Battery Indicator

Regulated 3.3V 100mA, low ripple charge pump with power good indicator

Regulated 5-V Charge Pump Voltage Tripler With Low Battery Indicator

TEXAS INSTRUMENTS - TPS60131PWPG4 . - CHARGE PUMP 5V, SMD, 60131, TSSOP20