Texas Instruments

8-bit addressable latch IC from Texas Instruments ALS logic family, featuring 1:8 demultiplexer followed by D-latch with active-high reset, 16-pin DIP package, 50pF load capacitance, ideal for data storage and bus interface applications. From $1.526 in stock worldwide shipping.

SN74AHC373N is an octal transparent D-type latch with 3-state outputs, featuring 50pF load capacitance and 8mA output current. Ideal for bus interfacing and data storage applications. From $0.66, in stock with worldwide shipping.

SYNCHRONOUS 4-BIT DECADE AND BINARY COUNTERS

Decoder/Demultiplexer 1 x 3:80°C ~ 70°C Voltage - Supply 4.5V ~ 5.5V 16-PDIP

SN74ALS760N is an octal bus transceiver with 3-state outputs in the Advanced Low-power Schottky TTL logic family by Texas Instruments. Key specs: 8-bit bidirectional data bus, 3-state outputs for bus-oriented operation, ALS-series TTL logic levels. From $1.94, in stock with worldwide shipping.

SN74AHC00N is a quad 2-input NAND gate IC from Texas Instruments AHC logic family, operating at 2V–5.5V supply with 4 independent channels and 14-PDIP package. Ideal for high-speed logic applications. From $0.37, in stock, worldwide shipping.

The SN74ABT574AN is an octal edge-triggered D-type flip-flop with 3-state outputs from Texas Instruments ABT family. It features 3.3V/5V operation, 50pF load capacitance, and active-low output enable for high-speed bus interfacing. From $0.48, available in DIP-20 package with worldwide shipping.

SN74ACT563N is an octal D-type transparent latch with 3-state outputs, featuring ACT logic family and 50pF load capacitance. Supports unidirectional bus driving with active-low enable control. From $0.55 in stock, worldwide shipping.

SN74AC563N is an octal D-type transparent latch with 3-state outputs, featuring AC logic family, 50pF load capacitance, and enable low/high control. Available from $0.94 in DIP-20 package with worldwide shipping.

SN74AC533N is an 8-bit D-type transparent latch bus driver from Texas Instruments with 3-state outputs, 50 pF load capacitance, and DIP-20 package. From $0.83 in stock, worldwide shipping.

SN74AC373N is an octal D-type transparent latch with 3-state outputs in a 20-pin DIP package. Features 50 pF load capacitance, enable-low control, and 24 mA output sink current. Ideal for bus interfacing and data storage applications. From $0.4641 in stock with worldwide shipping.

SN74AS286N is a 9-bit parity generator/checker with bus driver parity I/O port by Texas Instruments in the AS logic family, supporting even parity generation and odd/even parity checking in a 14-pin DIP package. Key specs: 9-bit parity, 48mA output sink current, active-low parity error output. Available in stock worldwide.

Operation of 4.5V to 5.5V VCC • Inputs accept voltages to 5.5V • Maximum tpd of 9.5ns at 5V • Inputs are TTL-voltage compatible

Quadruple 2-Input Positive-AND Gates

NAND Gate IC 3 Channel 0°C ~ 70°C Voltage - Supply 4.5V ~ 5.5V 14-PDIP

SN74AS11N is a triple 3-input AND gate IC from Texas Instruments, featuring Advanced Schottky (AS) logic with 3 independent gates, 3 inputs each, 14-Pin PDIP package, 4.5V–5.5V supply, 20mA output current. From $2.26, in stock with worldwide shipping.

Octal D-Type Edge-Triggered Flip-Flops With 3-State Outputs,4.5V ~ 5.5V,125 mA,0°C ~ 70°C (TA)

SN74ACT564N is an octal D-type flip-flop with inverted outputs and 3-state capability by Texas Instruments. Key specs: 8-bit register, 5V supply, 25ns propagation delay, PDIP-20 package. From $0.33, in stock with worldwide shipping.

Quadruple 2-Input Positive-AND Gates

Operation of 2V to 6V VCC • Inputs accept voltages to 6V • Max tpd of 9ns at 5V • 3-state inverting outputs drive bus lines directly • Full parallel access for loading • Flow-through architecture to optimize PCB layout

Quadruple 2-Input Positive-AND Gates

Quadruple 2-Input Positive-NAND Gates

DRV8805DW is a stepper motor controller IC from Texas Instruments with 2.3A max output current in a 20-pin SOP package. Supports unipolar and bipolar motors with built-in protection features. From $2.52, in stock with worldwide shipping.

UCD3020RGZT is a fully programmable digital power controller by Texas Instruments, supporting up to two regulated outputs and six DPWM outputs with current/voltage-mode PWM control and 3.3V supply. From $3.54, in stock worldwide shipping.

UCD3020RGZR is a digital power controller IC from Texas Instruments with current/voltage-mode control and PWM technique, supporting 3–3.6V input in a 48-pin VQFN package. From $2.77, in stock with worldwide shipping.

Use the download button to access the TCA6408AQPWRQ1 schematic symbol, PCB footprint, and 3D model.

MSP432P401RIZXHR is a 32-bit ARM Cortex-M4F mixed-signal microcontroller from Texas Instruments, featuring 48 MHz clock, ADC, DMA, and boundary scan in a compact NFBGA-80 package. From $13.33, in stock with worldwide shipping.

SimpleLink™ ultra-low-power 32-Bit ARM Cortex-M4F MCU With 14-bit ADC, 256KB Flash and 64KB RAM

SimpleLink Ultra-Low-Power 32-Bit ARM Cortex-M4F MCU With Precision ADC, 128KB Flash and 32KB RAM

ARM Microcontrollers - MCU SimpleLink Ultra-Low-Power 32-Bit ARM Cortex-M4F MCU With Precision ADC, 256KB Flash and 64KB RAM 100-LQFP -40 to 85

Use the download button to access the CSD17551Q3A schematic symbol, PCB footprint, and 3D model.

Low Dropout Positive Regulators

LM1086IS-1.8 is a 1.5A low dropout positive voltage regulator with fixed 1.8V output, featuring 1.3V typical dropout voltage and up to 18V input. Ideal for battery-powered systems. From $1.00 in stock, worldwide shipping.

TL082CM is a dual JFET-input wideband operational amplifier from Texas Instruments. Features low bias current (0.0004 µA max), 70 dB CMRR, and internal frequency compensation. Ideal for audio, instrumentation, and signal conditioning. From $0.51 in stock worldwide shipping.

Analog voltage monitor

SCANSTA112SM is a high-performance IEEE 1149.1 JTAG scan bridge multiplexer IC from Texas Instruments, supporting up to 12 TAP ports with flexible chain configuration. Ideal for board-level test, system debug, and multi-device JTAG management. From $11 in stock with worldwide shipping.

SCANSTA111MT is a Texas Instruments IEEE 1149.1 JTAG SCAN bridge IC in a 48-pin TSSOP package, enabling multi-drop JTAG topology with full boundary-scan support. From $7.11, in stock worldwide shipping.

STA Master

Parallel-to-Serial Converter

The SCAN90CP02VY is a 2-channel LVDS crosspoint switch configurable as a 2:1 multiplexer or 1:2 splitter in a 32-pin PQFP package by Texas Instruments. Key specs: 2 channels, LVDS differential signaling, SCAN test support. Available in stock with worldwide shipping.