Texas Instruments

Receiver and Drivers Meet or Exceed the a LVTTL input (respectively) connected to four Requirements of ANSI EIA/TIA-644 Standard differential line drivers that implement the electrical – SN65LVDS105 Receives Low-Voltage TTL characteristics of low-voltage differential signaling (LVTTL) Levels (LVDS). LVDS, as specified in EIA/TIA-644 is a data – SN65LVDS104 Receives Differential Input signaling technique that offers low-power, low-noise Levels, ±100 mV coupling, and switching speeds to transmit data at

2/2 Transceiver Full LVDS 16-TSSOP IC TRANSCEIVER FULL

8-Channel Gigabit Signal Conditioning Buffer

8-Channel Gigabit Signal Conditioning Buffer

Gigabit 8 x 8 CROSSPOINT SWITCH

Use the download button to access the SN65LVCP22PW schematic symbol, PCB footprint, and 3D model.

Gigabit 4 × 4 CROSSPOINT SWITCH

Gigabit 4 × 4 CROSSPOINT SWITCH

SN65LVCP202RGER is a 2-channel LVDS crosspoint switch IC from Texas Instruments with 60 dB off-state isolation and 24-pin VQFN package. It supports high-speed differential signal routing with separate outputs and low power consumption. From $4.05, in stock with worldwide shipping.

High-Speed Controller Area Network (CAN) Transceiver

Automotive Catalog LIN, MOST ECL, and K-Line Physical Interface

3V Full-Duplex RS-485 Driver and Receiver with enables

3.3 V Full-Duplex RS 485 Drivers and Receivers

3.3-V Full-Duplex RS-485 Drivers and Receivers

LOW-POWER RS-485 FULL-DUPLEX DRIVERS/RECEIVERS

Meets or exceeds the requirements of the TIA/ EIA-485A standard • Low quiescent power – 0.3-mA Active mode – 1-nA Shutdown mode • 1/8 Unit load up to 256 nodes on a bus • Bus-pin ESD protection up to 15 kV • Industry-standard SN75176 footprint • Fail-safe receiver (bus open, bus shorted, bus idle) • Glitch-free power-up and power-down bus inputs and output

DeviceNet? CAN Transceivers

CAN TRANSCEIVERS

TRANSCEIVERS

Fault-Protected RS-485 Transceivers with 3.3-V to 5-V Operation

Fault-Protected RS-485 Transceivers with 3.3-V to 5-V Operation

Use the download button to access the SN65HVD12P schematic symbol, PCB footprint, and 3D model.

EMC OPTIMIZED CAN TRANSCEIVER

Designed to Operate at up to 20 Million Data communication networks. Transfers per Second on Each RS-422/RS-485 Channel The SN65HVD09 is characterized for operation over an ambient air temperature range of –40°C to 85°C. • SN65HVD09 Packaged in Thin Shrink Small-Outline Package with 0.5-mm Pin Pitch • ESD Protection on Bus Pins Exceeds 12kV • Low Disabled Supply Current 8 mA Typ • Thermal Shutdown Protection • Positive- and Negative-Current Limiting • Power-Up/Down Glitch Protection

Use the download button to access the SN65EPT23DR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the SN65EPT23DGK schematic symbol, PCB footprint, and 3D model.

Use the download button to access the SN65EPT22DR schematic symbol, PCB footprint, and 3D model.

• Dual 3.3V LVTTL to LVPECL Buffer LVPECL translator device. The device includes • Operating Range circuitry to maintain known logic HIGH level when – LVPECL VCC = 3.0 V to 3.6 V With inputs are in open condition. The SN65EPT22 is GND = 0 V housed in an industry standard SOIC-8 package and is also available in TSSOP-8 package option. • Support for Clock Frequencies to 2.0 GHz (typ) • 420 ps Typical Propagation Delay Device Information(1) • Deterministic HIGH Output Value for Open Input PART NUMBER PA

SN65EPT21DR is a 3.3V differential PECL/LVDS to TTL translator IC from Texas Instruments. It features low-skew clock driver design with 20pF load capacitance and 24mA output current. From $2.09, in stock with worldwide shipping.

1 ns Propagation Delay PIN ASSIGNMENT(Add pullup on BOTH inputs) • Fmax > 300MHz • Operating Range: VCC = 3.0 V to 3.6 V with D or DGK PACKAGE GND = 0 V (TOP VIEW) • 24-mA TTL Output • Built-In Temperature Compensation • Drop-In Compatible to the MC10EPT21, MC100EPT21

Use the download button to access the SN65EPT21DGK schematic symbol, PCB footprint, and 3D model.

3.3V ECL Differential Receiver

5-V Dual Differential PECL Buffer-to-TTL Translator

5-V Dual Differential PECL Buffer-to-TTL Translator

5V Dual Differential PECL Buffer to TTL Translator

5-V Dual TTL-to-Differential PECL Translator

Dual TTL-to-Differential PECL Translator

5V Dual TTL to Differential PECL Translator

Use the download button to access the SN65ELT22D schematic symbol, PCB footprint, and 3D model.