Texas Instruments

Hex Noninverting Drivers

QUADRUPLE FET BUS SWITCH 2.5-V/3.3-V LOW-VOLTAGE BUS SWITCH WITH 5-V-TOLERANT LEVEL SHIFTER

Dual Positive-Edge-Triggered D-Type Flip-Flops With Clear and Preset

Hex Buffers And Line Drivers With 3-State Outputs

Octal Bus Transceivers With 3-State Outputs

Octal Buffers And Line Drivers

SINGLE SCHMITT-TRIGGER INVERTER GATE

Single Bus Buffer Gate With 3-State Output

Octal Edge-Triggered D-Type Flip-Flops With 3-State Outputs

Octal Transparent D-Type Latches With 3-State Outputs

OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

Operating range 2V to 5.5V VCC • Low power consumption, 10µA maximum ICC • ±8mA output drive at 5V • Latch-up performance exceeds 250mA per JESD 17

Octal Bus Transceivers With 3-State Outputs

Enhanced Product Single 2 Input Exclusive Or Gate

SOT-SC70-5

Quadruple Positive-NAND Gates With Schmitt-Trigger Inputs

OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

Dual Positive-Edge-Triggered D-Type Flip-Flops With Clear and Preset

Octal D type Transperent Latches with 3 state outputs

SN74AC08MDREPG4 is a quadruple 2-input AND gate IC from Texas Instruments in the AC logic family, supporting up to 50 pF load capacitance with 12 mA output current. Available worldwide with fast shipping.

2V to 6V VCC operation • Inputs accept voltages to 6V • Maximum tpd of 7ns at 5V

SN65MLVD205AD is a Multipoint-LVDS line driver and receiver IC from Texas Instruments, supporting EIA-899/TIA-899 interface standards with differential Schmitt trigger inputs. From $2.19, in stock worldwide shipping.

MULTIPOINT-LVDS LINE DRIVER AND RECEIVER

4-CHANNEL HALF-DUPLEX M-LVDS LINE TRANSCEIVERS

Dual Channel USB3.0 Redriver/Equalizer

PECL/ECL 1:2 Fanout Buffer

1:2 PECL/ECL Fanout Buffer • Operating Range – PECL: VCC = 2.375 V to 3.8V With VEE = 0 V – NECL: VCC = 0 V With VEE = –2.375V to –3.8 V • Open Input Default State • Support for Clock Frequencies > 3.0 GHz • 240 ps Typical Propagation Delay • Deterministic Output Value for Open Input Conditions • Q Output Will Default Low When Input Open or at VEE • Built-in Temperature Compensation Table 1. PIN DESCRIPTION • Drop in Compatible to MC10LVEP11, MC100LVEP11 PIN FUNCTION • LVDS Input Compatible

PECL/ECL 1:2 Fanout Buffer VSSOP (DGK) | 8

3.3-V Dual Differential LVPECL/LVDS Buffer to LVTTL Translator

3.3-V Dual Differential LVPECL/LVDS Buffer to LVTTL Translator

Use the download button to access the SN65LVELT23DGK schematic symbol, PCB footprint, and 3D model.

SN65LVELT23D is a low-skew clock driver IC from Texas Instruments featuring 2 outputs, 20pF load capacitance, and LVELT logic. Ideal for clock distribution in high-speed digital systems. From $2.78 in stock with worldwide shipping.

3.3 V Dual LVTTL to DIfferential LVPECL Translator

Dual LVTTL to DIfferential LVPECL Translator

450 ps (typ) Propagation Delay • Data and Clock Transmission Over Backplane • Operating Range: V • Signaling Level Conversion for Clock or Data CC 3.0 V to 3.8 with GND = 0 V • <50 ps (max) Output to Output Skew • Built-in Temperature Compensation • Drop in Compatible to MC100LVELT22

Clock Fanout Buffer (Distribution) IC 1:2 2.9 GHz 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)

3.3-V PECL 1:2 fanout buffer

HIGH-SPEED DIFFERENTIAL LINE RECEIVERS

SN65LVDS9638DGN is a dual-channel, 1500 Mbps LVDS high-speed differential line driver from Texas Instruments, supporting EIA/TIA-644 standard with 2-bit driver output. From $1.41, in stock worldwide shipping.

Quad High Speed Differential Receivers

Quad LVDS Receiver with -2 to 4.4V Common-mode Range