Texas Instruments

Use the download button to access the SN74LVC1G97QDCKRQ1 schematic symbol, PCB footprint, and 3D model.

Operational Amplifiers - Op Amps Prec Lo Noise Low Quies Crnt Op Amp

60-V Dual N-Channel NexFET Power MOSFET, CSD88539ND

16 MHz Ultra-Low-Power MCU with 128 KB FRAM, 8 KB SRAM, AES, 12-bit ADC

The TPS61085DGKR is an 18.5V, 2A step-up DC-DC boost converter with forced PWM mode from Texas Instruments. It operates from 2.3V to 6V input, switching at 650 kHz or 1.2 MHz in current-mode control with adjustable output up to 18.5V. Available in compact MSOP-8 package, in stock with worldwide shipping.

Buffers & Line Drivers 24Bit FET Bus Switch With Bus Hold

Use the download button to access the CSD88539ND schematic symbol, PCB footprint, and 3D model.

TLV8811DBVR is a 425 nA precision nanopower op-amp from Texas Instruments, featuring 95 dB CMRR and 550 µV max offset voltage. Designed for cost-optimized, battery-powered systems. From $0.29, in stock with worldwide shipping.

TLV3541IDBVT is a low-power voltage comparator from Texas Instruments with 80 dB CMRR and ultra-low 0.00002 µA bias current in a compact SOT-23-5 package. From $0.814, in stock worldwide shipping.

Single-channel MIPI® DSI to single-link LVDS bridge & FlatLink™ integrated circuit

5A Half Bipolar Stepper Motor Driver with 32-Level Current Regulation (PH/EN Ctrl)

LDO Regulator Pos 1.8V 0.2A 5-Pin SOT-23 T/R

105dB SNR 8-Channel Audio DAC (Automotive Catalog)

LVDS Interface IC Auto MIPI DSI Bridge TO eDP

4A/6A, 5.7 kVrms Isolated Dual Channel Gate Driver

Configurable Multiple-Function Gate

250-Mbps octal LVDS receiver

Translation - Voltage Levels SNGL Bit Dual Supply Bus Transceiver

Single Channel Single ADC Delta-Sigma 128sps 12-bit Serial 6-Pin SOT-23 T/R

Precision CMOS Dual Operational Amplifier

2 x 16bits Counters

SN74LV02DR is a quadruple 2-input positive-NOR gate in a 14-pin SOIC package, operating from 2 V to 5.5 V supply with a -40°C to 85°C temperature range. It delivers 12 mA output sink current and 50 pF load drive capability for general-purpose low-voltage logic applications.

The LM1084ISX-5.0/NOPB is a fixed 5V output, 5A low-dropout linear voltage regulator from Texas Instruments. It features a maximum dropout voltage of 1.5V, input voltage up to 29V, and is available in a 3-pin SOT-223 package. Designed for high-current applications requiring stable regulated 5V output with minimal external components.

Quad Low-Noise Rail-To-Rail Operational Amplifier

LM1084ISX-3.3/NOPB is a Texas Instruments 5 A low-dropout linear regulator with a fixed 3.3 V output and 1.3 V typical dropout voltage. It accepts input voltages from 4.8 V to 29 V and delivers stable regulation for high-current loads. Available in TO-263 package with worldwide shipping.

Free Positioning, Qi-Compliant Wireless Power Transmitter Manager

The SN75LVDT1422PAG is a 14-channel LVDS full-duplex serializer and deserializer compliant with EIA/TIA-644 in a 64-pin PQFP package. It converts parallel data to differential LVDS serial streams for long-distance, low-noise transmission at multi-hundred MHz data rates. Available from stock worldwide with fast delivery.

NFBGA-324

Translation - Voltage Levels SINGLE-BIT BUS TRANSCEIVER

Flip Flops Single Pos Edge Trig

Translation - Voltage Levels Single-Bit Dual Supply Bus Trans

Translation - Voltage Levels SNGLB Dual Supply Bus Trancvr

2.5V-5.5V input, 1A high efficiency step-down buck converter in SOT23 and SOT563 package

3-V to 5-V Multichannel RS-232 Line Driver/Receiver w/ +/-15-kV ESD Protection

High Accuracy LED Controller With Spread Spectrum Frequency Modulation and Internal PWM Generator

Single 2-Input Positive-NOR Gate

3-V to 5.5-V Multichannel RS-232 Line Driver/Receiver With +/-15-kV ESD (HBM) Protection

Use the download button to access the 74LVC1GU04DBVRG4 schematic symbol, PCB footprint, and 3D model.

NOR Gate 1-Element 2-IN CMOS 5-Pin SOT-23 T/R

Use the download button to access the ADC128S102CIMTX/NOPB schematic symbol, PCB footprint, and 3D model.

20MHz Low-Noise 1.8V RRIO CMOS Operational Amplifier With Shutdown

20MHz Low-Noise 1.8V RRIO CMOS Operational Amplifier With Shutdown

Use the download button to access the TCAN332GDCNR schematic symbol, PCB footprint, and 3D model.

The CD74HC4051NSR is a high-speed CMOS 8-channel single-ended analog multiplexer and demultiplexer from Texas Instruments with 200 MHz bandwidth and up to 6V input voltage. It routes one of eight analog or digital signals to a common output in an 8:1 configuration using a 16-pin SOIC package. Available from stock with worldwide shipping.

Dual, 5A, High-Speed Low-Side Power MOSFET Driver

Use the download button to access the ISO7841DWW schematic symbol, PCB footprint, and 3D model.

The LMH1228RTVT from Texas Instruments is a dual-channel 12G UHD-SDI cable driver with an integrated reclocker, housed in a 32-pin QFN package rated for a 260C peak reflow temperature, ideal for broadcast video transmission over long cable runs.

Use the download button to access the CSD75208W1015 schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TPS61261DRVR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TPD6E05U06RVZR schematic symbol, PCB footprint, and 3D model.