Texas Instruments

(Typical Unless Otherwise Noted) The LMC6772 is an ultra low power dual comparator with a maximum 10 μA/comparator power supply • Low Power Consumption (Max): IS = 10 current. It is designed to operate over a wide range of μA/comp supply voltages, with a minimum supply voltage of • Wide Range of Supply Voltages: 2.7V to 15V 2.7V. • Rail-to-Rail Input Common Mode Voltage The common mode voltage range of the LMC6772 Range exceeds both the positive and negative supply rails, a • Open Drain Output signif

LMC6772AIM is a dual CMOS micropower comparator featuring open-drain output, ultra-low 0.4 nA bias current, and 5 mV input offset voltage. Available from $1.10 with worldwide shipping.

CMOS Comparator

LMC662CN is a CMOS dual operational amplifier by Texas Instruments, designed for single-supply and low-voltage applications. Key specs: input voltage range extends to ground, rail-to-rail output, 1.4MHz bandwidth, 1.3V/μs slew rate. From $1.05, in stock with worldwide shipping.

LMC662CM is a dual CMOS operational amplifier with ultra-low input bias current of 2fA typical, rail-to-rail output swing, 1.4MHz bandwidth, and 1.5V/µs slew rate. From $0.87 in stock, worldwide shipping.

OpAmpIC

OP AMP

OpAmpIC

OpAmpIC

LMC6572BIM is a dual CMOS operational amplifier with rail-to-rail output, 1.5MHz bandwidth, and ultra-low 10pA bias current. Ideal for portable instruments, sensor interfaces, and battery-powered systems. From $0.735, in stock, worldwide shipping.

LMC6572AIM is a dual CMOS rail-to-rail input/output operational amplifier with 1.5MHz bandwidth and 10fA bias current. Features low input offset voltage (3.5mV max) and 60dB CMRR. Ideal for battery-powered and precision signal conditioning applications. From $1.05, in stock, worldwide shipping.

LMC6494BEM is a quad CMOS rail-to-rail input/output operational amplifier from Texas Instruments. Features 82 dB CMRR, 6.8 mV max input offset voltage, and ultra-low 0.0002 µA bias current. From $1.75, in stock, worldwide shipping.

LMC6494AEM is a quad rail-to-rail CMOS operational amplifier with ultra-low bias current of 1.5 fA typical and 82 dB CMRR. Features voltage-feedback architecture with frequency compensation for precision signal conditioning. From $2.99, in stock with worldwide shipping.

OpAmpIC

OpAmpIC

APRIL 2015 LMC6482 CMOS Dual Rail-to-Rail Input and Output Operational Amplifier

OpAmpIC

LMC6464BIN is a quad CMOS rail-to-rail operational amplifier from Texas Instruments. Features 10 fA typical input bias current, 85 dB CMRR, and 3.7 mV max input offset voltage. Ideal for precision sensor signal conditioning and battery-powered portable equipment. From $2.03, in stock, worldwide shipping.

LMC6464BIM is a low-voltage rail-to-rail CMOS quad operational amplifier by Texas Instruments. Key specs: 1.4V to 15.5V supply, 35μA quiescent current per amplifier, 350kHz gain-bandwidth product. From $2.145, in stock with worldwide shipping.

Operational Amplifier

(Typical values unless otherwise stated) • Low offset voltage: 150μV • Single-supply operation: 4.5V to 15.5V • Ultra-low input bias current: 10fA • Output swing to within 20mV of supply rail, 2kΩ load • Input common-mode range includes V– • High-voltage gain: 123dB, 2kΩ load • Improved latch-up immunity

SOIC-8

PLASTIC, DIP-8

OpAmpIC

LMC6081IN is a precision CMOS single operational amplifier by Texas Instruments, featuring ultra-low input bias current of 10fA and rail-to-rail output swing. Key specs: 1.3MHz GBW, 1.3V/μs slew rate, 2.7V–15.5V supply voltage. Available in DIP-8 package, in stock with worldwide shipping.

LMC6081AIM is a precision CMOS operational amplifier with ultra-low input bias current of 0.1 pA, 75 dB CMRR, and voltage-feedback architecture in a Small Outline package. From $2.23, in stock with worldwide shipping.

Precision CMOS Quad Micropower Operational Amplifier

OpAmpIC

OP AMP

OpAmpIC

OpAmpIC

LMC6061IM is a precision CMOS operational amplifier featuring ultra-low input bias current of 4 fA max, 1.3 mV offset voltage, and 85 dB CMRR. Ideal for sensor interfaces, medical instruments, and high-impedance signal conditioning. From $0.74 in stock, worldwide shipping.

LMC6044IN is a quad CMOS operational amplifier featuring rail-to-rail output, ultra-low 4 fA bias current, and 60 dB CMRR. Ideal for precision sensor and battery-powered applications. From $2.40, in stock, worldwide shipping.

OpAmpIC

OP AMP

LMC6041IN is a single-channel CMOS operational amplifier with rail-to-rail output swing, ultra-low 4pA input bias current, and 62dB CMRR. Ideal for battery-powered instrumentation and sensor signal conditioning. From $0.96, in stock worldwide shipping.

OpAmpIC

OpAmpIC

OpAmpIC