Texas Instruments

Current Mode Push-Pull PWM With Programmable Slope Compensation

Dual Differential Line Driver

Embedded Camera Module PMIC

The LM25088QMH-1/NOPB is an automotive-grade current-mode non-synchronous buck controller supporting 4.5V to 42V wide input range, featuring pulse-width modulation control and fixed 1.205V reference voltage. Designed for demanding automotive power supply designs with AEC-Q100 qualification. Available in 16-pin SOIC package with worldwide stock and fast shipping.

Precision Micropower Shunt Voltage Reference

OPA2320AIDR is a dual-channel, zero-crossover CMOS operational amplifier from Texas Instruments with 20 MHz bandwidth, 0.9 pA input bias current, and 114 dB CMRR, ideal for low-power precision sensor and instrumentation signal chains.

Texas Instruments LP8900TLE-AAEC/NOPB is an ultra-low-noise dual LDO regulator delivering 200 mA per channel, ideal for RF and analog circuits. It operates from 3.3V to 5.5V input with a maximum dropout voltage of 164 mV in a compact 6-ball BGA package. Available from stock with worldwide shipping.

26V, Bidirectional, 350kHz Bandwidth, Low- or High-Side Voltage Output Current Sense Amplifier

AEC-Q100, Grade 0 and 1, Automotive High Voltage Dual Differential Comparator

50ppm/C Precision Micropower Shunt Voltage Reference

3.3-V ABT Octal Bus Transceivers And Registers With 3-State Outputs

Automotive Catalog Single Schmitt-Trigger Buffer

Use the download button to access the SN74CBT16214DGGR schematic symbol, PCB footprint, and 3D model.

8-Bit Identity/Magnitude Comparators (P=Q) with Enable

High accuracy window voltage detector for overvoltage & undervoltage monitoring

CMOS dual 4-input OR gate from the CD4000 logic family in a 14-pin SOIC package. Operates across a wide supply voltage range with 50 pF load capacitance rating and lead-free construction. Available from global distributors with worldwide shipping options.

Use the download button to access the TCAN1051GVDQ1 schematic symbol, PCB footprint, and 3D model.

Audio Codec AC'97 Voltage-Translation Transceiver

Single Channel, Current-Limited USB Power Distribution Switch

Enhanced Product 16-bit Ultra-Low-Power Microcontroller, 60KB Flash, 2KB RAM, 12-Bit ADC, 2 USCIs,

Dual High Power Operational Amplifier

Use the download button to access the LM5113QDPRRQ1 schematic symbol, PCB footprint, and 3D model.

Enhanced Product Cap-Free Nmos 250-Ma Ldo Regulator With Reverse Current Protection

Quadruple 2-Input Positive-OR Gate

500MHz to 14GHz Wideband, Low Noise Fractional N PLL With Ramp/Chirp Generation

SIMPLE SWITCHER Power Converter 150 KHz 1A Step-Down Voltage Regulator

1-of-8 FET Multiplexer/Demultiplexer 2.5-V/3.3-V Low-Voltage High-Bandwidth Bus Switch

Use the download button to access the ISO7310FCQDRQ1 schematic symbol, PCB footprint, and 3D model.

The CD74HC173PWR is a high-speed CMOS quad D-type flip-flop with 3-state outputs from Texas Instruments, housed in a 16-pin SOIC package. It features dual output-enable control with 7.8mA output drive and operates from 2V to 6V supply voltage. Available in stock worldwide with fast shipping.

Use the download button to access the SN74AUP1G14DRLR schematic symbol, PCB footprint, and 3D model.

9 to 15-Series Cell Li-Ion and Li-Phosphate Battery Monitor (bq76940 Family)

3- to 5-Series Li-Ion and Li-Phosphate Ultra-Low-Power Stackable Battery Protector

N-Channel, 3.4mOhm, 80V, SON5x6 NexFET™ Power MOSFET, CSD19502Q5B

4-Line To 10-Line Decoders (1 of 10)

High-Efficiency, Low-Emissions, Reinforced Digital Isolator With Integrated Power

Dual RS-232 Driver/Receiver With IEC61000-4-2 Protection

3V to 20V Input, 1A Step-Down Converter with Light Load Efficiency

3-V to 5.5-V Multichannel RS-232 Line Driver/Receiver With +/-15kV IEC ESD Protection

Hex Schmitt-Trigger Inverters

Use the download button to access the SN65MLVD047AD schematic symbol, PCB footprint, and 3D model.

Dual Nanopower Open Drain Output Comparator

Use the download button to access the ADS1018IRUGR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the UA9638CDR schematic symbol, PCB footprint, and 3D model.

CSD17578Q5A 30 V N-Channel NexFET™ Power MOSFET

Automotive, 2.7 V to 38 V Bipolar Output Hall Effect Sensor Family

4.0V-18V Vin, 3A/2A/2A Triple Synchronous Buck Converter with I2C Controlled Dynamic Voltage Scaling

DRV2604L Low Voltage Haptic Driver for ERM and LRA with Internal Memory and Smart Loop Architecture

Dual-Output, 2-A/1-A Low Dropout Voltage Regulators with Power Good

Quad, Low Offset, Rail-to-Rail I/O Operational Amplifier

Use the download button to access the 6PA3100IRHBRQ1 schematic symbol, PCB footprint, and 3D model.