Texas Instruments

Dual Differential Drivers And Receivers

SN75462P is a dual high-voltage, high-current peripheral driver IC with NAND gate-based open-collector outputs, supporting 2 driver channels, built-in overcurrent protection, and standard input characteristics. From $0.15 in stock worldwide shipping.

Dual MOSFET Drivers, Operating Temperature 0°C ~ 70°C (TA)

SN75160BDWR is an octal general-purpose IEEE-488 interface bus transceiver with Schmitt trigger inputs, supporting 8-bit bidirectional data transfer. Features active-high and active-low enables for flexible bus control. From $1.87, in stock worldwide shipping.

The SN75158P is a dual differential line driver from Texas Instruments compliant with EIA-422-B and TIA-422-B standards, providing two balanced differential output channels in an 8-pin DIP package for robust long-distance serial data transmission. It delivers noise-immune differential signaling for industrial communication. Available in stock with worldwide shipping.

Buffers & Line Drivers Dual Line Driver/LIN ,- 75 mA ,75 mA ,5 V ,0 V to 7 V ,0 C+ 70 C

DIFFERENTIAL LINE TRANSCEIVERS 4.5V ~ 5.5V,0°C ~ 70°C

Differential Line Transreceiver

SN75115N is a dual differential line receiver IC from Texas Instruments featuring open-collector or totem-pole outputs and general-purpose interface standard. From $2.28, in stock with worldwide shipping.

SN75112N is a dual-channel V.35 line driver IC from Texas Instruments featuring gated differential outputs and high-drive capability. It integrates two drivers in a DIP-14 package, supporting high-speed data transmission up to 100 kbps. Ideal for serial communications, industrial data links, and modem interfaces requiring robust V.35 standard compliance.

3.3-V ABT Octal Edge-Triggered D-Type Flip-Flops With 3-State Outputs

SN74LVTH244ADBE4 is a 3.3V LVT octal buffer/driver with 3-state outputs, featuring 64mA output drive, 50pF load capacitance, and enable-low control. Supports unidirectional data flow in SOIC-20 package. Available in stock worldwide with fast shipping.

SN74LVTH244ADB is an 8-bit 3-state octal buffer/line driver from Texas Instruments, operating at 2.7V-3.6V with 5V-tolerant inputs, 24mA output drive, in a 20-pin SSOP package. From $0.34. In stock, 1 pc minimum, ships worldwide.

3.3-V ABT Quadruple Bus Buffers With 3-State Outputs

Octal Edge-Triggered D-Type Flip-Flop With 3-State Outputs

Buffer, Inverting 1 Element 8 Bit per Element 3-State Output 20-TSSOP

DUAL BUFFER GATE

DUAL 2-INPUT POSITIVE-OR GATE

Enhanced Product Dual 2-Input Positive-Nor Gate

DUAL 2-INPUT POSITIVE-NOR GATE

DUAL 2-INPUT POSITIVE-NAND GATE

Use the download button to access the SN74LVC245APWRG3 schematic symbol, PCB footprint, and 3D model.

SINGLE-BIT DUAL-SUPPLY BUS TRANSCEIVER

Enhanced Product Single-Bit Dual-Supply Bus Transc., Configurable Voltage Transl. , 3-State Outputs

SINGLE INVERTER GATE

Single Positive-Edge-Triggered D-Type Flip-Flop

SINGLE POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH CLEAR AND PRESET

Use the download button to access the SN74HC4851PW schematic symbol, PCB footprint, and 3D model.

5-V CAN Transceiver With I/O Level Shifting and Supply Optimization

STEREO AUDIO CODEC

4.25 Gbps VCSEL Driver with Serial Interface

SN74LVC1G34DSFR is a single-gate buffer IC from Texas Instruments LVC logic family, supporting 1.65V–5.5V supply with 50pF load capacitance, 32mA output drive, and 6-pin SOT-563 package. From $0.0842, in stock worldwide shipping.

SINGLE SCHMITT-TRIGGER BUFFER

Single Inverter Buffer/Driver With Open-Drain Output

Use the download button to access the SN74LVC1G00DRYR schematic symbol, PCB footprint, and 3D model.