Texas Instruments

PLASTIC, DIP-8

Buffer/Driver 6-CH Non-Inverting Open Drain CMOS 14-Pin SOIC Tube

TEXAS INSTRUMENTS - MSP430F2101TRGET - MCU, 16BIT, MSP430, 16MHZ, VQFN-24

Full Speed USB to Serial Port Controller USB 2.0 3.3V Tray 32-Pin LQFP

Voltage References Low Noise Very Low Drift Prec Vltg Ref

The TL082ACPE4 is a dual JFET-input general-purpose op-amp from Texas Instruments with 86 dB typical CMRR, 200 pA maximum input bias current at 25°C, and 4 MHz gain-bandwidth product, available in an 8-pin DIP package for through-hole designs.

150mA Low-Noise Low-Dropout Regulator With Shutdown

The TL082BCDG4 is a dual general-purpose JFET-input operational amplifier from Texas Instruments with a wide ±18 V supply range and low input bias current of 0.2 nA. It features 86 dB typical common-mode rejection ratio and a 5 mV maximum input offset voltage. Supplied in the standard 8-pin SOIC package for easy SMT assembly.

Texas Instruments LM2765M6X NOPB is a charge pump step-up DC/DC converter boosting from 3.6V input to 11V output at up to 20mA load current. It requires no inductors and operates from a single supply in a compact 6-pin SOT-23 package. A lead-free solution for low-power LCD bias and white LED drive applications worldwide.

NOR Gate 4-Element 2-IN CMOS 14-Pin CDIP Tube

Analog Comparators Single high speed, precision comparator with shutdown 6-SOT-23 -40 to 125

Use the download button to access the ISOW7844DWE schematic symbol, PCB footprint, and 3D model.

VCA810AIDG4 is a voltage-controlled amplifier with voltage-feedback architecture by Texas Instruments in an 8-pin SOIC package. Key specs: 300 µV maximum input offset voltage, 14 µA bias current, frequency compensation for stable operation. Available from stock with worldwide shipping.

Fuel Gauge Lead-Acid/Li-Ion/Li-Pol/NiCd/NiMH 3.3V 28-Pin SSOP T/R

Fuel Gauge Lead-Acid/Li-Ion/Li-Pol/NiCd/NiMH 3.3V 28-Pin SSOP Tube

Use the download button to access the LM35DZLFT1 schematic symbol and PCB footprint.

Precision Amplifiers Dual Enh JFET Prec Op Amp

DC DC Cntrlr Single-OUT Sync Step Down 10V to 55V Input 16-Pin HTSSOP EP T/R

Battery Management 6 to 10-Series Cell Montr(bq76940 Family

IC COUNTER 4BIT SYNC BIN 16-DIP

Flip Flop D-Type Pos-Edge 2-Element 14-Pin SOIC T/R

Driver 4A 2-OUT Lo Side Inv 8-Pin SOIC T/R

The TL064CPWE4 is a quad low-noise JFET-input operational amplifier from Texas Instruments in an SOIC package. It offers ultra-low bias current of 0.0002 µA, 86 dB CMRR, and wide supply range for precision signal conditioning. Available in small outline packaging for compact analog front-end PCB designs with worldwide shipping.

The 8550701RA is a D-type bus-interface flip-flop from Texas Instruments in the HCT logic family, featuring a single element with positive-edge triggering, active-low 3-state output enable, and a 20 MHz maximum toggle frequency at 50 pF load. It is housed in a 20-pin ceramic DIP (CDIP) tube package for high-reliability applications.

IO-Link device transceiver with integrated surge protection and 5-V LDO output

Texas Instruments CC2480A1RTC, RF Transceiver 2400MHz to 2483.5MHz 48-Pin QFN

3-V to 5-V Multichannel RS-232 Line Driver/Receiver w/ +/-15-kV ESD Protection

Latch Transparent 3-ST 8-CH D-Type 20-Pin TSSOP T/R

Use the download button to access the LMR33620CRNXT schematic symbol, PCB footprint, and 3D model.

ARM Microcontrollers - MCU IC ARM CORTEX MCU

RS-232 Interface IC 3-5V Multich RS-232 Line Driver/Receiver

10-V, 50-mA, Low-Iq, Low-Dropout Linear Regulator

Octal Transparent D-Type Latches With 3-State Outputs

LM3S6911-IQC50 is a 32-bit ARM Cortex-M3 microcontroller running at 50 MHz by Texas Instruments. Key specs: 256 KB Flash, 64 KB SRAM, 10/100 Ethernet MAC, LQFP-100 package. Available from stock with worldwide shipping.

Texas Instruments TPS77025DBVRG4 is an ultra-low-power 50 mA fixed-output LDO voltage regulator with 48 mV typical dropout voltage and 2.7 V to 10 V input range. It features excellent line regulation of 0.0162% max and is packaged in a compact 5-Pin SOT-23 for space-constrained portable designs. Available lead-free from Texas Instruments, in stock with worldwide shipping.

Octal Transparent D-Type Latches With 3-State Outputs

Latch Transparent 3-ST 8-CH D-Type 20-Pin TSSOP T/R

Use the download button to access the LM139JB schematic symbol, PCB footprint, and 3D model.

Buffer/Line Driver 8-CH Non-Inverting 3-ST CMOS 20-Pin SOIC Tube

TPA3126D2 2x50-W Differential Analog Input, Class-D Amplifier With Low Idle Current

Buffer/Line Driver 8-CH Non-Inverting 3-ST CMOS Automotive 20-Pin SOIC T/R

Voltage References Prec MicroPwr Shunt Vtg Ref

The REF3125AIDBZTG4 is a precision 2.5V voltage reference from Texas Instruments in a compact 3-pin SOT-23 package with adjustable output from 2.495V to 2.505V. It sources up to 10 mA output current, operates from 2.55V to 5.5V input, and covers a -40°C to +125°C industrial temperature range. Ideal for battery-powered ADC/DAC reference applications requiring minimal board space.

The TPS28225DG4 is a 4A dual-output half-bridge MOSFET gate driver supporting both high-side and low-side configurations with Schmitt trigger inputs. It features inverting and non-inverting outputs in an 8-pin SOIC package. Available from Texas Instruments with worldwide shipping.

Bus XCVR Single 8-CH 3-ST 20-Pin SOIC T/R

The LMR33620BRNXT is a SIMPLE SWITCHER synchronous buck converter accepting a 3.8V to 36V input and delivering up to 2A output with an adjustable 1V to 24V output range, featuring ultra-low EMI for automotive and industrial power supplies.

LM4040BIM3-5.0+ is a Texas Instruments integrated circuit for electronic designs. Key specs include 3 pins, SOT23 (3-Pin), and datasheet-backed parameters. From inquiry quote with in stock worldwide shipping support.

Buffer/Line Driver 8-CH Non-Inverting 3-ST CMOS 20-Pin SSOP T/R

Use the download button to access the SN74AHC1G126DBVT schematic symbol, PCB footprint, and 3D model.

I²C Logic Buffer 2.5V/3.3V/5V/9V/12V 8-Pin SOIC Tube