Texas Instruments

Instrumentation Amplifiers Programmable Gain Instrumentation Amp

The TL3844D is a current-mode PWM controller IC from Texas Instruments supporting 12V to 30V input, 500kHz maximum switching frequency, and 200mA gate drive output in a 14-pin SOIC package. It provides fixed-frequency peak current control for step-up and flyback converter topologies. RoHS compliant and available in volume quantities for industrial and consumer SMPS designs.

The PINA1620RTWT (INA1620) is a high-fidelity audio operational amplifier by Texas Instruments featuring integrated thin-film resistors for low noise and excellent matching. It delivers audiophile-grade performance in a compact QFN package. Available from stock worldwide with competitive pricing.

The SN74LS259BNG4 is an 8-bit addressable latch from Texas Instruments housed in a 16-pin DIP package. It stores 1-bit data at any of 8 independently addressed latch positions using a 3-bit address input. Available with worldwide shipping, suitable for parallel-to-serial data buffering and I/O port expansion in TTL logic systems.

4-Output PCIe/Gen1/Gen2/Gen3/Gen4 Clock Buffer and Level Translator

PUCC28742DBVR is a Texas Instruments high-efficiency flyback controller with optocoupler feedback for isolated AC-DC and DC-DC power supplies. It integrates primary-side regulation and valley switching for optimized efficiency across light and full load. Available in SOT-23 6-pin package with worldwide shipping.

The TL3843DRG4 is a current-mode PWM switching controller from Texas Instruments designed for fixed-frequency off-line and DC-DC converter power supply designs. It supports input voltages from 8.2V to 30V, features programmable oscillator frequency, cycle-by-cycle current limiting, and an internal reference voltage. Packaged in a 14-pin SOIC, it is widely used in flyback, forward, and boost converter topologies for industrial and consumer power supplies.

High-Performance Current-Mode PWM Controller

Octal General-Purpose Interface Bus Transceiver

Op Amp Single Low Noise Amplifier R-R O/P ±18V/36V 8-Pin SOIC T/R

Buffers & Line Drivers Quad Bus Buffers

Digital to Analog Converters - DAC 16B S-Ch Serial Interface

Operational Amplifiers - Op Amps Low-power JFET-input quad operational amplifier 14-CDIP -55 to 125

Quad Channel Single ADC Delta-Sigma 15sps 24-bit Serial 24-Pin SSOP Tube

Use the download button to access the TPS544C25RVFR schematic symbol, PCB footprint, and 3D model.

Digital to Analog Converters - DAC 16B Sgl Ch Ser Inter +/-18V Out DAC

Texas Instruments PCA9306 is a dual bidirectional I2C and SMBus voltage level translator supporting 1.0 V to 3.6 V on one side and 1.8 V to 5.5 V on the other. It handles data rates up to 400 kHz Fast-mode and passes interrupts without glitches. Packaged in 8-pin SSOP for compact board layouts.

3-V to 5-V Multichannel RS-232 Line Driver/Receiver w/ +/-15-kV ESD Protection

SIMPLE SWITCHER® 3.8V to 36V, 2A Synchronous Buck Converter With Ultra-Low EMI

The INA131APG4 is a precision instrumentation amplifier from Texas Instruments with a fixed gain of 100. It delivers 106 dB CMRR, 125 µV max offset voltage, and 70 kHz bandwidth in a DIP-8 package. From competitive pricing with in-stock availability and worldwide shipping.

Buffer/Line Driver 4-CH Non-Inverting 3-ST CMOS 14-Pin SOIC T/R

Precision Amplifiers Low Offset Voltage

900-MHz, High Power Output, Current Feedback Amplifier

CAN Interface IC Auto Cat 3.3V CAN Transceiver

Buffer/Line Driver 4-CH Non-Inverting 3-ST CMOS 14-Pin SOIC T/R

Precision Amplifiers LinCMOS Precision Dual Op Amp

GREEN, PLASTIC, SOIC-16

Comparator Dual 5.5V 8-Pin SOIC T/R

DIP-16

The SN74AHCT14NSRE4 is a hex Schmitt-trigger inverter IC from Texas Instruments, featuring 6 inverting channels with hysteresis inputs for improved noise immunity. It operates on a 4.5 V to 5.5 V supply, supports input voltages from 0 V to 5.5 V, and is packaged in a 14-pin SOIC.

SN74AHCT14NE4 is a hex Schmitt-trigger inverter from Texas Instruments in the AHCT logic family, featuring 6 independent Schmitt-trigger inverting channels in a 14-pin PDIP package. Operating from a 4.5 V to 5.5 V supply, it provides hysteresis for noise-immune signal conditioning of slow or noisy input waveforms. Designed for waveform squaring, debouncing, and level translation in digital logic and microcontroller applications.

SN74AHC08NE4 is a quad 2-input AND gate from Texas Instruments in the AHC CMOS logic family, providing four independent AND functions in a 14-pin PDIP package. The device operates from 2 V to 5.5 V, delivers up to 8 mA sink current per output, and offers 50 pF load drive capability with fast propagation delays. It is designed for signal gating, clock control, and combinational logic in industrial and consumer electronics.

The CD4069UBMG4 is a CMOS hex inverter IC featuring 6 unbuffered inverter elements in a 14-pin SOIC package. It operates across a wide supply voltage range with 50 pF load capacitance. Available from stock worldwide with competitive pricing.

20ppm/°C Max, 100µA, SOT23-3 Series Voltage Reference

LDO Voltage Regulators High PSRR Fast RF Low-Enable 100mA

Power Factor Correction - PFC PFC Controller

Voltage Mode PWM Controller 1A 14-Pin PDIP Tube

16 MHz Ultra-Low-Power Microcontroller With 8 KB FRAM, 1 KB SRAM, 60 IO, 10-bit ADC, IR Logic

Precision Amplifiers Dual Enhanced JFET Precision

The TLC272CPWG4 is a dual general-purpose CMOS operational amplifier from Texas Instruments with 16 V maximum supply, 60 pA typical input bias current, 80 dB common-mode rejection ratio, and rail-to-rail output swing in an 8-pin TSSOP package.

Use the download button to access the TPS56528DDA schematic symbol, PCB footprint, and 3D model.

Buffer/Driver 6-CH Inverting Open Drain CMOS 14-Pin TSSOP T/R

LVDS Driver/Receiver 400Mbps 0.454V 5-Pin SOT-23 T/R

Texas Instruments OPA4830IPWG4 is a quad voltage-feedback operational amplifier with rail-to-rail output swing and ±6.6 V / 11 V supply range. It features 80 dB typical CMRR and 76 dB minimum CMRR with a 13 µA max bias current in a 14-pin TSSOP package. Available in stock for signal conditioning and instrumentation designs.

The TL052AIDG4 is a dual JFET-input operational amplifier from Texas Instruments with 3 MHz gain-bandwidth product and 0.0002 µA ultra-low bias current. It achieves 65 dB minimum CMRR and 4.6 mV maximum input offset voltage in an 8-pin SOIC package. Available worldwide for precision analog instrumentation and active filter designs.

Texas Instruments CD74HC4016EG4 is a quad bilateral CMOS analog switch with four independent 1x2 switch channels in a 14-pin DIP package. It operates from 2V to 6V supply with low on-state resistance. Available in stock worldwide with fast global shipping.

Texas Instruments MSP430F2101IDW, 16bit MSP430 Microcontroller, MSP430, 16MHz, 1 kB + 256 B Flash, 20-Pin SOIC

IC REG BCK 1.8V 0.4A SYNC TSOT23

16-bit Ultra-Low-Power Microcontroller, 4kB Flash, 256B RAM, Comparator

Digital to Analog Converters - DAC 12-Bit UltrLo Glitch Vltg Output Cnvtr