Texas Instruments

Buffer/Line Driver 8-CH Non-Inverting 3-ST BiCMOS 24-Pin SOIC T/R

Gate Drivers Automotive 4-A, 6-A, 3.0-kV(RMS) Isolated Dual-Channel Gate Driver With Dead Time 16-SOIC -40 to 125

OP Amp Single GP R-R I/O ±2.75V/5.5V Automotive 5-Pin SOT-23 T/R

Dual 250 mA Output, UltraLow Noise, High PSRR, Low-Dropout Linear Regulator

CD4001BMG4 is a quad 2-input NOR gate IC from Texas Instruments in the 4000-series CMOS logic family featuring four independent NOR functions in a 14-pin SOIC package. It operates from 3V to 18V supply voltage with low power consumption. Available from stock worldwide with competitive pricing.

Operational Amplifiers - Op Amps Automotive 10MHz, Rail-to-Rail Input/Output, Low-Voltage 1.8V CMOS Operational Amplifier 5-SOT-23 -40 to 125

Texas Instruments TLC272AIPE4 is a dual general-purpose CMOS operational amplifier rated for 16 V supply in an 8-pin PDIP package. It features a 65 dB minimum CMRR, 60 nA maximum bias current, and internal frequency compensation for stable unity-gain operation. Available from stock worldwide for analog signal conditioning designs.

The LM75BIMM-5/NOPB is a digital temperature sensor and thermal watchdog IC in a compact MSOP-8 package. It measures temperatures from -55°C to +125°C with 9-bit resolution over an I2C-compatible 2-wire interface. Ideal for system thermal monitoring, over-temperature protection, and fan control in industrial and consumer electronics.

The CD4073BF is a triple 3-input AND gate from Texas Instruments in the CMOS 4000 series. It features three independent AND gates with 3 inputs each, a maximum output low current of 6.8mA, and is housed in a rugged 14-Pin Ceramic DIP package. Available from stock worldwide with fast shipping for reliable logic design applications.

Quad Rail-To-Rail Low-Voltage Low-Power Operational Amplifier

TLC2264CNG4 is a quad rail-to-rail output general-purpose op-amp from Texas Instruments, operating from 2.7 V to 8 V supply with 730 kHz gain-bandwidth product in a 14-pin DIP package.

Texas Instruments TL431AIDBVTG4 is an adjustable precision shunt voltage reference with 2.495 V to 36 V output range, 100 mA sink current capability, AEC-Q100 automotive grade, in a compact 5-pin SOT-23 package.

Monostable Multi-vibrator Hi Spd CMOS Log Dual Retriggerable

Switching Controllers Current-Mode PWM Controller

Quad, Advanced LinCMOS™, 0.2mA, Rail-To-Rail Operational Amplifier

TLV2264AQD Texas Instruments, CMOS, Op Amp, 700kHz, 2.7 → 8 V, 14-Pin SOIC

Triple Transmitter Quint Receiver RS-232 28-Pin TSSOP T/R

Audio Amp Speaker 2-CH Stereo 6W Class-AB 20-Pin HSOP EP T/R

Quadruple 2-Input Positive-OR Gates

Texas Instruments MAX3232EIPWE4 is a dual RS-232 line driver/receiver operating from 3 V to 5.5 V supply with Schmitt-trigger inputs, EIA-232 compliance, and a 16-pin SOIC package for serial communication interfaces. Available from stock with worldwide shipping.

The PCM1741EG4 is a dual-channel 24-bit delta-sigma digital-to-analog converter from Texas Instruments, offering serial 2's complement binary input, up to 2.232 V analog output, and precision audio performance in a 16-pin SSOP package. It is fully RoHS compliant and suited for high-fidelity audio applications. Available from stock worldwide with fast shipping.

Operational Amplifiers - Op Amps 1.8V High CMR RRIO Op Amp

TEXAS INSTRUMENTS - UC2843D8G4 - PWM CONTROLLER, SMD, 2843, SOIC8

Use the download button to access the UC2843DG4 schematic symbol, PCB footprint, and 3D model.

Use the download button to access the SN74HC240DBR schematic symbol, PCB footprint, and 3D model.

Logic Gates EP QUAD 2-INPUT Pos- OR GATE

Programmable 1-PLL VCXO Clock Synthesizer with 1.8-V LVCMOS Outputs

USB Power SW Hi Side/DIST Single 5.5V 0.75A to 1.25A 8-Pin SOIC T/R

Use the download button to access the ISO7820DWR schematic symbol, PCB footprint, and 3D model.

1.8V, High CMR, RRIO Op Amp

High-immunity, 100-Mbps, 5.7-kVRMS reinforced dual-channel 2/0 digital isolator

Use the download button to access the TLC5922DAPR schematic symbol, PCB footprint, and 3D model.

1-Channel Single ADC Delta-Sigma 105ksps 24-bit Serial 16-Pin TSSOP T/R

Low-Voltage 10-Bit FET Bus Switch

Texas Instruments SN74LS641-1DWG4 is an 8-channel bidirectional bus transceiver with open-collector outputs and common direction control. Features 24 mA output sink current in a 20-pin SOIC package. Available from stock worldwide with fast shipping.

The SN74CBTLV3384DWG4 is a low-voltage TTL-compatible 10-bit bus switch from Texas Instruments in the CBTLV/3B family, implementing five independent 1:1 bidirectional switches with active-low enable control in a 24-pin SOIC package. It provides near-zero propagation delay and low on-resistance switching for 1.8V to 3.3V bus interface applications. Available in stock worldwide for low-voltage signal routing and bus isolation in portable and embedded systems.

The SN74BCT25244DWG4 is an octal 25-ohm bus buffer and line driver from Texas Instruments featuring integrated 25-ohm series termination resistors for incident wave switching on high-speed backplane and bus lines. It delivers 188mA output drive current with active-low output enable control in a 24-pin SOIC package. Ideal for driving long PCB traces, backplane buses, and transmission line interconnects in computing and telecommunications equipment.

CD4001UBME4 is a 14 pins logic ic by Texas Instruments. Key specs: 14 pins, Small Outline Packages package, NOR Gate 4-Element 2-IN CMOS 14-Pin SOIC Tube. From quote-based sourcing, in stock checks support worldwide shipping.

3V to 6V Input, 3A Synchronous Step-Down SWIFT™ Converter

Texas Instruments UC2825ANG4 is a high-speed current-mode PWM controller operating from 8.8 V to 22 V supply with up to 1 MHz switching frequency and 2 V / 200 mA gate drive output. Supports configurable current-mode or voltage-mode control in a 16-pin DIP package. Available from stock worldwide with competitive pricing.

Single LVDS Receiver

Analogue & Digital Crosspoint ICs 2.0 Gbps 4x4 Crosspoint Switch

Use the download button to access the SN65LVDT41PWR schematic symbol, PCB footprint, and 3D model.

Real Time Clock Parallel 32byte Clock/Calendar 28-Pin PLCC Tube

The DRV5055A1QLPG is a ratiometric linear Hall effect sensor from Texas Instruments offering analog output proportional to magnetic flux density. It features bipolar field sensing from -22 mT to +22 mT, operates from 2.7 V to 38 V supply, and is packaged in a TO-92 3-pin package rated -40°C to 125°C.

Texas Instruments TPS72748YFFT is a fixed 4.8V output, 250mA low-dropout LDO voltage regulator with 0.13V nominal dropout voltage and 2V to 5.5V input range in a tiny 4-pin DSBGA package. Available from stock with worldwide shipping.

LVDS ICs 1/0 630Mbps 2.4V ~ 3.6V SOT-23-5 RoHS

The TPS54354PWPRG4 is a high-efficiency DC-DC step-down (buck) switching regulator from Texas Instruments, delivering 3A of output current at 1.8V from an input voltage range of 4.5V to 20V. Housed in a 16-pin HTSSOP package with an exposed thermal pad, it offers voltage-mode PWM control for precise regulation in industrial and communications power supply designs. Available from authorized distributors with worldwide shipping.

Texas Instruments TLC556MJB is a dual CMOS timer IC capable of generating pulse and rectangular waveforms up to 1.2 MHz in a ceramic glass-sealed 14-pin DIP package. It operates at supply voltages up to 15 V with two independent timer channels for monostable and astable applications. Available from stock worldwide with fast shipping.

Clock Drivers & Distribution 1 LVTTL:4 LVDS Clock Fanout Buffer