Texas Instruments

Analog Comparators Quad Gen Purpose LinCMOS

The TLC374CPWG4 is a quad LinCMOS differential comparator from Texas Instruments featuring four independent channels with open-drain outputs. It offers an extremely low bias current of 0.6 nA and a maximum input offset voltage of 6.5 mV. Available in a 14-pin TSSOP package for compact signal comparison applications.

CD54HCT04F is a hex inverter logic gate with six independent CMOS inverters by Texas Instruments, housed in a 14-pin ceramic DIP package. Key specs: HCT family, 5.2mA output current, 50pF load capacitance, TTL-compatible inputs. From $0.60, in stock with worldwide shipping.

Use the download button to access the CD54HC540F3A schematic symbol and PCB footprint.

CD54HC4538F is a dual precision monostable multivibrator from Texas Instruments in the HC/UH logic family, housed in a 16-pin ceramic DIP package with a load capacitance of 50 pF and a maximum output low current of 5.2 mA. It provides two independent retriggerable one-shot pulse generators, each with separate trigger and reset inputs for flexible timing control. Available through authorized distributors with worldwide shipping.

Logic Gates Military 4-ch, 2-input, 4.5-V to 5.5-V NAND gates 14-CDIP -55 to 125

CD54ACT373F3A is an ACT-family 8-channel transparent D-type latch with 3-state outputs and 24 mA output current in a 20-pin ceramic DIP package. Provides independent latch enable and output enable controls for bus interface and data buffering applications. Available from stock worldwide with competitive pricing.

The CD54HC74F3A is a dual D-type positive-edge-triggered flip-flop IC from Texas Instruments HC logic family, operating from 2 V to 6 V. Each flip-flop includes set and reset inputs and supports clocking frequencies up to 20 MHz at 50 pF load. Packaged in a ceramic 14-pin DIP for high-reliability applications with worldwide availability.

CD54ACT86F3A is a quad 2-input XOR gate IC from Texas Instruments in the ACT logic family. Key specs: 4 independent XOR gates, 24 mA output drive, 14-pin ceramic DIP package rated for extended temperature. From $4.50, in stock with worldwide shipping.

Texas Instruments CD54HC14F is a hex Schmitt-trigger inverter in the HC CMOS family, housed in a ceramic DIP-14 package. Provides 6 independent inverting channels with hysteresis for reliable noise-immune signal conditioning from 2 V to 6 V supply. Available from stock with worldwide shipping.

Buffer/Line Driver 8-CH Non-Inverting 3-ST CMOS 20-Pin CDIP Tube

CD54HC40103F is a single 8-bit synchronous/asynchronous binary down counter from Texas Instruments in the HC High-Speed CMOS family, packaged in a 16-pin ceramic DIP. It features a terminal count output (TCO), synchronous load, and asynchronous reset-to-maximum-count capability for flexible countdown timing applications. Available from stock worldwide for military, aerospace, and industrial designs requiring ceramic package reliability.

The CD54HCT27F3A is a triple 3-input NOR gate from Texas Instruments in the HCT CMOS logic family, offering three independent NOR gate functions with TTL-compatible inputs. It operates with a 50pF load capacitance and is housed in a 14-pin ceramic DIP package, making it suitable for military-range logic applications requiring reliable NOR logic in high-reliability environments.

The SN75ALS173NSE4 is a quad differential line receiver from Texas Instruments designed for RS-422, RS-423, RS-485, EIA-X.26, and EIA-X.27 interface standards. It features differential Schmitt-trigger inputs for high noise immunity, 4 independent receiver channels, and 2.25V minimum output swing. Housed in a 16-pin SOP package with RoHS-compliant construction.

The CD54HC04F is a hex inverter IC in the High-Speed CMOS HC/UH logic family, housing 6 independent single-input NOT gates with 5.2 mA output drive and 50 pF load capacity in a 14-pin ceramic DIP package. It delivers reliable logic inversion across 2V to 6V CMOS supply rails for military and high-reliability applications.

Texas Instruments CD54ACT174F3A is a hex D-type flip-flop with 6 positive-edge-triggered bits, clocked at up to 80 MHz on a 5 V supply with TTL-compatible ACT logic levels. Packaged in a 16-pin ceramic DIP for high-reliability applications, it features synchronous clear and bus-interface drive capability. Available through authorized distributors with worldwide shipping.

NOR Gate 4-Element 2-IN CMOS 14-Pin CDIP Tube

Voltage Mode PWM Controller 400mA 16-Pin CDIP Tube

The TPS3305-33DG4 is a dual processor supervisor IC from Texas Instruments with watchdog timer, 4.55 V reset threshold, power-on reset generation, manual reset input, two supervision channels, and an 8-pin SOIC package for reliable microprocessor and DSP power supply monitoring.

Processor Supervisor 4.55V/2.93V 5V/3.3V 8-Pin HVSSOP EP Tube

1% accuracy low-voltage wide-operating current adjustable precision shunt regulator

Translation - Voltage Levels Lo-Pwr Dual Sply Lvl Translating Ifc

1% accuracy low-voltage wide-operating current adjustable precision shunt regulator

TEXAS INSTRUMENTS - TLVH431BIDBZTG4 - Voltage Reference, Low Voltage, Shunt - Adjustable, TLVH431B Series, 1.24V to 18V, SOT-23-3

The TPS61120PWRG4 is a dual-output DC-DC boost converter from Texas Instruments, stepping up 1.8 V to 5.5 V input to provide 2.5 V to 5.5 V at 1.1 A and 0.9 V to 5.5 V at 0.2 A using current-mode PWM control. It delivers efficient power conversion for portable electronics in a 16-pin TSSOP package.

TPS2115PWG4 is a dual-input automatic power-multiplexer IC from Texas Instruments supporting 1.5 V to 5.5 V rails at up to 1.25 A, housed in an 8-pin TSSOP for seamless supply-failover designs.

Quint Transmitter Triple Receiver RS-232 24-Pin SSOP Tube

RF Transceiver FSK/OOK 2.5V/3.3V 48-Pin LQFP T/R

Power Switch ICs - Power Distribution Dual In/Single Out MOSFET

The UC1526J883B is a voltage-mode PWM switching controller from Texas Instruments, housed in an 18-pin ceramic DIP package rated to MIL-STD-883. It delivers up to 100 mA output drive with an 8 V to 35 V input voltage range for high-reliability power supply designs. Available with worldwide shipping from authorized distributors.

The TL16C550CPTG4 is a single-channel UART interface IC from Texas Instruments, supporting 1 Mbps data rate, 8-bit parallel bus, 16 MHz clock, 3V or 5V operation, 48-pin LQFP package, and 16-byte FIFOs for asynchronous serial communication in industrial systems. In stock worldwide.

DAC8311IDCKRG4 is a 14-bit, single-channel digital-to-analog converter with SPI serial interface and up to 5.5 V analog output range in a compact 6-pin SOT-23 package. It achieves a maximum linearity error of 0.0244% for precise voltage output generation. Available from authorized distributors with worldwide shipping.

Analog Comparators Quad Differential Comparator

Quadruple differential line driver

16-bit Microcontrollers - MCU MSP430G2x44 Mixed Signal Microcontroller 40-VQFN -40 to 85

MSP430G2x33, MSP430G2x03 Mixed Signal Microcontroller

The SN75ALS173NE4 is a quadruple differential line receiver compliant with RS-422, RS-423, and RS-485 standards. It features differential Schmitt-trigger inputs, 3-state outputs, and supports up to 4 independent receiver channels in a 16-pin DIP package for robust industrial data communications.

DAC 1-CH Segment 8-bit 16-Pin TSSOP Tube

MCU 16-bit MSP430 MSP430 RISC 16KB Flash 2.5V/3.3V 38-Pin TSSOP Tube

SN75ALS173NSG4 is a quad differential line driver from Texas Instruments in a 16-pin SOIC package, featuring ALS-logic speed, tri-state outputs, and RS-422/RS-485 compatible drive levels for reliable multi-drop bus communication. From $1.50 in stock worldwide shipping.

XNOR Gate 4-Element 2-IN CMOS 14-Pin SOIC T/R

5-A/5-A dual-channel gate driver with 5-V UVLO, inverting inputs, and enable

IC REG CTRLR PUSH-PULL 8SOIC

Small Size, Nano Power, Low Voltage Comparator

TEXAS INSTRUMENTS - OPA2336EA - IC, OP AMP, DUAL CMOS, 2336, VSSOP8

The SN74AC04DG4 is a hex inverter logic IC from Texas Instruments, containing six independent single-input CMOS inverter channels from the AC logic family. It operates from 2V to 6V supply, provides 12 mA output drive current, and supports 50 pF capacitive loads. Housed in a 14-pin SOIC package, this device is ideal for signal inversion, clock buffering, and logic-level conversion in digital systems.

ESD Suppressors / TVS Diodes Dual Port Transient Suppressor

The PCA9557DT is an 8-bit I2C general-purpose I/O expander from Texas Instruments, featuring 8 bidirectional I/O lines accessible via I2C bus at up to 400 kHz clock. It provides 8-bit parallel I/O port expansion with one 8-bit port and is housed in a 16-pin SOIC package. This device is widely used in embedded systems to expand limited microcontroller I/O through a two-wire serial interface.

Comparator Single ±15V/30V 8-Pin SOIC Tube

Analog Comparators Single Low-Power Strobed Differential