Texas Instruments

10-MHz, Low-Power, Low Noise, RRO, Operational Amplifier

0.7Vin Synchronous Boost Converter with 800 nA Ultra-Low Quiescent Current

0.7Vin Synchronous Boost Converter with 800 nA Ultra-Low Quiescent Current

1-mA, 300-MHz Gain Bandwidth, Voltage-Feedback Op Amp

150mA Low-Dropout (LDO) Regulator With Foldback Current Limit for Portable Devices

Hex Buffers And Line Drivers With 3-State Outputs

Texas Instruments TIOS1015DMWR is a single-channel analog circuit IC with 350mA maximum output current in a compact 10-pin SON (small outline no-lead) package. Designed for precision signal conditioning and analog switching with RoHS-compliant construction. Available in stock with worldwide shipping.

AEC-Q100, 26V, Bi-Directional, Zero-Drift, Low-/High-Side, Voltage Output Current Sense Amplifier

Use the download button to access the ISO1211DR schematic symbol, PCB footprint, and 3D model.

Automotive Fault Protected CAN Transceiver With Flexible Data-Rate

TPS22916 5.5-V, 2-A Ultra-Low Leakage Load Switch

40-V, 100-mOhm Single-Channel Smart High-Side Switch

36V, Low Power, All-Purpose Amplifier with MUX-Friendly Input

2.5V-5.5V input, 3-A high efficiency step-down converter in 2x2 QFN or SOT563 package

36V, Bi-Dir, High Accuracy, Low-/High-Side, I2C Current/Pwr Monitor w/Integrated 2mΩ Shunt Resistor

-8V, P ch NexFET MOSFET™, single LGA 1.2x1.2, 9.9mOhm

Use the download button to access the PCM1861QDBTRQ1 schematic symbol, PCB footprint, and 3D model.

Dual 2:1 USB 2.0 Mux/DeMux or Single Ended Cross Switch with 16-V OVP

Use the download button to access the CSD95490Q5MC schematic symbol, PCB footprint, and 3D model.

Automotive single high voltage, low power comparator<br />&nbsp;

Rail-to-Rail Output Wideband Fully Differential Amplifier

Small Reinforced Isolated Modulator With ±50mV Input and CMOS Interface

Automotive Low-Power 96kHz Mono Audio Codec

Texas Instruments LM723CN/NOPB Linear Voltage Regulator, 150mA, Adjustable, 2 → 37 V 14-Pin, MDIP

Use the download button to access the OPT3007YMFR schematic symbol, PCB footprint, and 3D model.

MSP430G2x32, MSP430G2x02 Mixed Signal Microcontroller

Use the download button to access the LM5145RGYT schematic symbol, PCB footprint, and 3D model.

SIMPLE SWITCHER Power Converter 150 KHz 1A Step-Down Voltage Regulator

Use the download button to access the TLC2201AMDG4 schematic symbol, PCB footprint, and 3D model.

MSP430FR5728 8 MHz ULP microcontroller with 16 KB FRAM, 1 KB SRAM, 21 IO, 10-bit ADC and comparator

Analog to Digital Converters - ADC 16B 250kHz CMOS ADC

RRIO, High Output Current & Unlimited Cap Load Op Amp in SOT23-5

IC GATE XOR 4CH 2-INP 14-DIP

The CD4071BMT is a CMOS Quad 2-Input OR Gate IC from Texas Instruments, offering four independent OR gates with rail-to-rail output and wide supply voltage range from 3V to 15V. Designed for low-power digital logic applications, it features noise immunity and stable operation across industrial temperature ranges. Available in a compact SOIC-14 package, in stock with worldwide shipping.

Use the download button to access the CC3220MODASM2MONR schematic symbol, PCB footprint, and 3D model.

The TL750L12CDRE4 is a fixed 12V low-dropout (LDO) voltage regulator from Texas Instruments using a PNP pass element with a maximum dropout voltage of 0.6V and an input voltage range of 13V to 26V. It provides excellent line regulation of 0.04% maximum and is housed in an 8-pin SOIC package, ideal for low-current 12V regulated supply generation in industrial and consumer electronics.

Ultra-Low Power 1.65V to 5.5V Hall Effect Switch Sensor

Use the download button to access the LM134H schematic symbol, PCB footprint, and 3D model.

SOIC-16

TEXAS INSTRUMENTS - TLV8801DBVT - OP-AMP, 1.5KHZ, 1.5V/MS, SOT-23-5

LMH0384SQ/NOPB is a 3 Gbps HD/SD-SDI configurable adaptive cable equalizer supporting data rates up to 2.97 Gbps for SMPTE 424M 3G-SDI, 1.485 Gbps HD-SDI, and 270 Mbps SD-SDI signals. It features extended cable reach equalization, automatic rate detection, and a 16-pin QFN package targeting professional broadcast and video routing equipment.

Use the download button to access the ESD401DPYR schematic symbol, PCB footprint, and 3D model.

3.6V, 3A, 6.7mΩ Load Switch with Adjustable Fast Turn-On, Power Good, and Quick Output Discharge

±250 mV-Input, Reinforced Isolated Modulator with 10 MHz Internal Clock and CMOS Interface

3A Fixed / Adjustable Output Linear Regulator

The BQ27750DRZR is a single-cell battery fuel gauge IC from Texas Instruments offering accurate state-of-charge measurement with impedance track technology. It communicates via I2C interface in a compact 12-pin SON package. Available in stock with worldwide shipping for portable device applications.

12-W, 3.3/5-V Input, Wide Adjust Output Boost Converter

Quad, Low-Power, General Purpose Differential Comparator

Quadruple 2-Input Exclusive-OR Gates

Small Reinforced Isolated Modulator With ±50mV Input and Manchester-Encoded CMOS Interface