Texas Instruments

Use the download button to access the SN74LVC2G53DCT3 schematic symbol, PCB footprint, and 3D model.

AFE General Purpose 8 ADC 24bit 1.8V/3V 64-Pin NFBGA T/R

16-bit ES-PWM with 7-bit Device Level Brightness Control

Analog Multiplexer Single 2:1 8-Pin SSOP T/R

LDO Regulator Neg -5.2V 1.8A 3-Pin(3+Tab) TO-220 Tube

Encoders, Decoders, Multiplexers & Demultiplexers 8 Ln to 3 Ln Priority Encoder

Use the download button to access the PCM1851PJT schematic symbol, PCB footprint, and 3D model.

Logic Comparators Octal binary or BCD Magnitude Comparator

The SN74F04NSRG4 is a hex inverter from Texas Instruments in the Advanced Schottky F/FAST logic family with 6 independent NOT gates. It operates at 5 V and delivers a maximum sink current of 20 mA per output in a 14-pin SOP package. Designed for high-speed logic inversion, bus driving, and signal conditioning in digital systems.

High-accuracy upgrade to industry standard LM75 / TMP75 I2C temperature sensor

16-Bit RISC Mixed-Signal Microcontroller

Logic Gates

Texas Instruments TLC2543CDBG4 is a 12-bit successive-approximation ADC with 11 analog input channels and a serial SPI interface sampling at up to 66 kSPS in a 20-pin SSOP package. Maximum conversion time is 10 µs with 0.0244% linearity error and 5.5 V analog input range. Available from stock with worldwide shipping.

150-mA 30-V ultra-low-Iq wide-input low-dropout (LDO) regulator with reverse current protection

16-bit Microcontrollers - MCU 24 MHz MCU with 16KB FRAM, 2KB SRAM, comparator, 12-bit ADC, UART/SPI/I2C, timer 40-VQFN -40 to 105

Analog to Digital Converters - ADC Current Shunt D-S Modulator

Operational Amplifiers - Op Amps 1.8V 1uA max 0-C/O Rail-to-Rail I/O

Flip Flops Octal Edge-Trig D-Ty F-F W/3-State Otpt

Bus Transceivers 16-Bit Bus Trnscvrs With 3-State Outputs

Counter Shift Registers Parallel-Ld 8 Bit Ser Shift Register

Dual High-Current Buck Converters and Dual Linear Regulators

Operational Amplifiers - Op Amps Dual channel, high performance, 27 V, 105 MHz, RRIO FET input op amp 8-SOT-23 -40 to 125

Audio Amplifiers 100W Class D Stereo Power Stage

Precision micropower shunt voltage reference

High Speed Operational Amplifiers Dual Wideband Current Feedback

Analog to Digital Converters - ADC Current Shunt D-S Modulator

Analog to Digital Converters - ADC 2 1B 10MHz 2nd Order Delta-Sigma Mod

Octal Edge-Triggered D-Type Flip-Flops with 3-State Outputs

1.8V, 700nA, Zero-Crossover Rail-To-Rail I/O Operational Amplifier

TEXAS INSTRUMENTS - OPA2369AIDCNTG4 . - Operational Amplifier, Dual, 2 Amplifier, 0.005 V/µs, 1.8V to 5.5V, SOT-23, 8 Pins

CD74AC574M96 is an octal non-inverting D-type flip-flop with 3-state outputs in a 20-pin SOIC package. Supports 50 pF load capacitance and independent output control. From $0.65, in stock, worldwide shipping.

Flip Flops Octal Edge-Trig D-Ty F-F W/3-State Otpt

Deserializer for 1MP/60fps and 2MP/30fps Cameras

FB Generator Isolated Fb Generator 14-Pin CDIP Tube

Texas Instruments SN65HVD3086EDGSRG4 is a single-channel RS-422/RS-485 line transceiver in a 10-pin VSSOP package, supporting data rates up to 20 Mbps with differential Schmitt-trigger inputs and ±15 kV ESD protection. Available from stock with worldwide shipping.

The SN75LBC175ADG4 is a quad RS-422/RS-485 differential line receiver from Texas Instruments featuring differential Schmitt-trigger inputs, 3-state outputs, and support for EIA-422 and EIA-485 standards. It integrates 4 independent receiver channels in a 16-pin SOIC package.

The SN75LBC175ADRG4 is a quad differential line receiver IC from Texas Instruments supporting RS-422 and RS-485 interfaces with differential Schmitt trigger inputs and 3-state outputs in a 16-pin SOIC package. It is RoHS-compliant and suited for robust industrial serial communication designs.

Texas Instruments SN75ALS174ADWG4 is a quad RS-485/EIA-422-B differential line driver with 4 independent channels in a 20-pin SOIC, supporting data rates up to 10 Mbps for robust industrial serial communications. Available from stock with worldwide shipping.

The SN74ALVC126DGVRE4 is a quad bus driver with tri-state outputs and active-high enable control in a 14-pin TVSOP package from Texas Instruments' ALVC family. It provides 24-mA output sink current and 50-pF load capacitance for unidirectional bus buffering. Available in stock worldwide with RoHS-compliant green lead-free construction.

Parallel-Load 8-Bit Shift Registers

Darlington Transistors 50-V, 7-ch darlington transistor array, -20C to 70C 16-SO -40 to 70

The ULN2003AIPWG4 is a high-voltage, high-current Darlington transistor array IC from Texas Instruments featuring 7 NPN Darlington pairs with 500mA output current capacity. Designed for driving relays, motors, lamps, and other inductive loads, it includes built-in transient suppression diodes. Available in SOIC-16 package with worldwide shipping.

Single Schmitt-Trigger Inverter Gate

Feedback Loop Power Controllers Isolated Feedback Generator

Use the download button to access the ISO7720FDWVR schematic symbol, PCB footprint, and 3D model.

RS-422 Interface IC Quad Diff Line Drvr

Bus Transceivers 16-Bit Bus Trnscvrs With 3-State Outputs

Inverters Hex Schmitt-Trigger Inverters

Motor / Motion / Ignition Controllers & Drivers 100-V Three-Phase Smart Gate Driver With Buck Regulator and Three Current Shunt Amplifiers 48-VQFN -40 to 125

Texas Instruments CD54HC245F3A is a high-speed CMOS octal non-inverting bidirectional bus transceiver with 3-state outputs, operating from -55°C to 125°C in a 20-pin ceramic DIP package. It features direction control and 50 pF load capacitance, ideal for military and harsh-environment bus interfacing. Available from stock worldwide.