Texas Instruments

SN74LVCC3245ADWRE4 is a bidirectional 8-bit bus transceiver supporting voltage translation between 1.65 V–3.6 V (Port A) and 2.7 V–5.5 V (Port B). It features 3-state outputs, common direction control, and operates across -40°C to +85°C in a 24-pin SOIC package.

LM4040AIM3-4.1+ is a precision shunt voltage reference providing a stable 4.1 V output with tight tolerance. Housed in a compact SOT-23 3-pin package for space-constrained designs. Available worldwide for analog signal conditioning and ADC reference applications.

MCU 32-bit Piccolo F2806x C28x RISC 128KB Flash 3.3V 100-Pin HTQFP EP Tray

TPA6021A4NE4 is a 2-channel stereo Class-AB audio amplifier from Texas Instruments delivering 2 W per channel with integrated volume control, supporting both headphone and speaker outputs in a 20-pin PDIP package.

TEXAS INSTRUMENTS - LM2574HVN-5.0 - IC, SWITCHING REG 5.0V, 2574, DIP8

DAC 1-CH R-2R 16-bit 24-Pin SSOP Tube

Operational Amplifiers - Op Amps Quad Mcpwr R-to-R I/O Op Amp w/Shutdwn

SOIC-28

Single Channel Single ADC SAR 40ksps 12-bit Parallel/Serial 28-Pin SOIC Tube

RS-485 Interface IC 1/2-duplex 15-kV ESD Transceiver

TLV2453CDGS is a dual CMOS operational amplifier with 220 kHz gain-bandwidth, operating from 3 V or 5 V single supply with rail-to-rail output, packaged in a compact 10-pin MSOP for portable signal-conditioning circuits.

Switching Voltage Regulators 2.5V Out Hi-Eff Step-Down Converter

The CD4536BPWE4 is a CMOS programmable timer IC from the 4000 series featuring an up-counting binary counter with a maximum frequency of 2.5 MHz. It offers 50 pF load capacitance and 4 mA output drive in a 16-pin SOIC package. Available from Texas Instruments with worldwide in-stock shipping.

Texas Instruments LMV822DG4, Dual Op Amp, 5.5MHz Rail-Rail, 3 V, 8-Pin SOIC

150-mA 30-V ultra-low-Iq wide-input low-dropout (LDO) regulator with reverse current protection

Texas Instruments PUCC23513DWY is a single-channel isolated gate driver with 4 A source / 5 A sink peak currents and 5.7 kVRMS isolation rating. Opto-compatible input in a 6-pin SOIC package suits IGBT and MOSFET drive. From $3.80 in stock worldwide shipping.

Voltage Monitor 3.3V/5V/12V 8-Pin SOIC Tube

LVDS Interface IC 3.3-V LVDS Quad Channel High-Speed Differential Line Receiver 16-TSSOP -40 to 85

Texas Instruments TLV2453ID is a dual micropower rail-to-rail input/output op-amp with shutdown, featuring 5 nA bias current and 2 mV input offset voltage in an 8-pin SOIC for battery-sensitive signal conditioning. Available from stock with worldwide shipping.

Logic Gates Quadruple 2-Input Exclusive-OR Gate

High Speed CMOS Triple 2-Channel Analog Multiplexer/Demultiplexer with TTL inputs

GREEN, PLASTIC, MSOP-10

Two input NAND, Dual High-Speed MOSFET Drivers

The ADS7806PG4 is a single-channel successive approximation ADC from Texas Instruments in a 28-pin plastic DIP package. It supports a wide ±10 V analog input range, 0.022% max linearity error, and 20 µs conversion time. Suitable for industrial data acquisition, process monitoring, and general-purpose single-channel analog-to-digital conversion.

LMV822MXNOPB is a op amp dual gp r-r o/p ±2.75v/5.5v 8-pin soic t/r from Texas Instruments. Key specs include SOIC-, with sourcing details matched to the listed manufacturer part number. From quote-based pricing, in stock worldwide shipping.

Quad bus transceivers

Voltage References NRND, alternate is LM4040CIM3X-2.5/NO

Texas Instruments LMV822DGKRG4, Dual Op Amp, 5.5MHz Rail-Rail, 3 V, 8-Pin MSOP

SC-70, 5 PIN

Transistor Output Optocouplers 16-Pin 4-Channel AC Input Optocoupler 16-PDIP

Use the download button to access the CD4054BPW schematic symbol, PCB footprint, and 3D model.

Use the download button to access the THS4513RGTR schematic symbol, PCB footprint, and 3D model.

Operational Amplifiers - Op Amps Wideband Low Noise Low Distortion

ADS7806PBG4 is a low-power, 12-bit successive approximation ADC with a single analog input channel accepting ±10 V signals and a 20 µs maximum conversion time. It is housed in a 28-pin PDIP package and achieves 0.011% maximum linearity error for precision data acquisition. Available from stock with worldwide shipping.

Operational Amplifiers - Op Amps Dual Mcpwr R-to-R I/O Op Amp w/Shutdwn

Use the download button to access the 74AC11244PW schematic symbol, PCB footprint, and 3D model.

The ADS7806P is a low-power 12-bit successive-approximation ADC from Texas Instruments with a single analog input channel accepting ±10 V signals. It achieves a maximum conversion time of 20 µs and linearity error of 0.022% in a 28-pin DIP package. In stock worldwide with same-day shipping available.

REF1004C-2.5E4 is a two-terminal 2.5V shunt voltage reference from Texas Instruments with a nominal output of 2.5V, output range of 2.480V to 2.511V, and single-output configuration in an 8-pin SOIC package. Provides stable precision reference voltage for ADC and DAC circuits. Available in stock globally with worldwide shipping.

Inverter Schmitt Trigger 6-Element Bipolar 14-Pin SOP Tube

Single Channel Single ADC Pipelined 400Msps 14-bit Parallel/LVDS 80-Pin HTQFP EP T/R

Transimpedance Amplifiers 5.5 GHz Gain Bandwidth Product, Decompensated Transimpedance Amplifier with FET Input 8-WSON -40 to 125

The CD4536BF3A is a programmable CMOS timer and binary counter IC from Texas Instruments in the 4000-series family, featuring an up-counting binary counter with up to 500 kHz maximum frequency and 50 pF load capacitance. Housed in a ceramic 16-pin DIP package for high-reliability applications. In stock with worldwide shipping.

7 X 7 MM , 0.40 MM PITCH, GREEN, PLASTIC, NFBGA-209

Texas Instruments TAS5001PFBG4 is a digital audio PWM processor DSP designed for Class-D amplifier front-end processing in consumer audio systems, housed in a 48-pin TQFP package with 0.35 mm pitch. It provides digital audio signal conditioning and PWM modulation for high-efficiency speaker drive designs. Available from authorized distributors worldwide.

500 nA Quad, RRIO, Nanopower Operational Amplifier for Cost-Optimized Systems

Audio DSPs Dig Aud PWM Proc

Texas Instruments TAS5001IPFBR is a consumer audio IC in a 48-pin TQFP package designed for digital audio processing and power amplification control. The single-function device uses plastic/epoxy packaging with 0.35 mm fine-pitch leads. Available from stock worldwide with competitive pricing for audio system designs.

AFE General Purpose 4 ADC 24bit 1.8V/3V 64-Pin TQFP T/R

The ADS5474IPFPG4 is a 14-bit single-channel parallel-output ADC with a differential input range of ±2.2 V and a sampling rate up to 400 MSPS, housed in an 80-pin HTQFP package. It achieves less than 0.02% linearity error, making it suitable for high-speed signal acquisition in communications and test equipment. Available from stock with worldwide shipping.

The TMP117MAIDRVT is a high-accuracy 16-bit digital temperature sensor from Texas Instruments with ±0.1°C maximum accuracy, 5µA operating current, and I2C interface in a compact 2mm x 2mm SOT-563 package. It delivers NIST-traceable precision temperature measurement for medical, environmental, and industrial applications. Available from stock worldwide with competitive pricing.