Texas Instruments

Motor / Motion / Ignition Controllers & Drivers Low Voltage Haptic Driver

16-bit Microcontrollers - MCU Ultra low power MCU

Use the download button to access the TMP112NAIDRLR schematic symbol, PCB footprint, and 3D model.

SIMPLE SWITCHER®, 36V 3A Synchronous Step-Down Converter

The LM22673TJ-5.0/NOPB is a 3 A SIMPLE SWITCHER step-down voltage regulator with a fixed 5 V output, adjustable soft-start and current limit, 4.5 V to 42 V input range, operating from -40°C to 125°C in a 7-pin TO-263 package.

Use the download button to access the TLIN1029DQ1 schematic symbol, PCB footprint, and 3D model.

1-mA, 300-MHz Gain Bandwidth, Voltage-Feedback Op Amp

Switching Voltage Regulators 3-A Boost Converter with 0.5-V Ultra Low Input Voltage 8-WSON -40 to 85

The ISO7761DBQR is a 6-channel digital isolator from Texas Instruments with a 6/1 channel direction split, providing galvanic isolation for mixed-direction signal transmission across high-voltage barriers. It operates from 2.25V to 5.5V on both sides and supports data rates up to 100 Mbps per channel. Housed in a 16-pin SSOP package, it suits industrial motor drives, solar inverters, and isolated fieldbus interfaces.

SOIC-16

SSOP-16

+3.3V Rising Edge Data Strobe LVDS 21-Bit Channel Link - 66 MHz

1.5-A USB-Friendly Li-Ion Battery Charger and Power-Path Management IC

Analog Comparators Nanopower 1.8V Push-Pull

27V Flat-Clamp Surge Protection Device

VQFN-24

20W Digital Input Smart Amp with I/V Sense for Speaker Protection and 4.5-18V Supply Voltage Range

Automotive 3A High-Accuracy Low-Noise Low-Dropout (LDO) Voltage Regulator

The Texas Instruments TVS1400DRVR is a 14 V flat-clamp transient voltage suppressor surge protection device with a silicon diode and clamping voltage up to 18.4 V in a small outline no-lead package. It provides single-channel complex protection against ESD and surge transients. Available from stock worldwide with fast shipping.

Automotive 2A High-Accuracy Low-Noise Low-Dropout (LDO) Voltage Regulator

Automotive 300-mA high-voltage ultra-low-IQ low-dropout (LDO) linear regulator

200mA Low-Iq Low-Noise Low-Dropout (LDO) Regulator in Ultra-Small 0.8mm x 0.8mm WCSP

OPAx375, 500uV, 10-MHz, Low Broadband Noise, RRO, Operational Amplifier

Single Buffer/Driver With Open-Drain Output

Piccolo™ 32-bit MCU with 100 MHz, FPU, TMU, 256 KB Flash, CLA, PGAs, SDFM

Switching Voltage Regulators SIMPLE SWITCHER Power Converter 150 kHz 0.5A Step-Down Voltage Regulator 8-SOIC

Use the download button to access the DAC60508ZRTET schematic symbol, PCB footprint, and 3D model.

SIMPLE SWITCHER® 3.8V to 36V, 3A Synchronous Buck Converter With Ultra-Low EMI

LDO Voltage Regulators Sgl Output LDO 150 mA Fixed(3.0V)

2.4V-5.5V input, 1A step-down converter With 1% Accuracy in 1.5x2mm QFN

Use the download button to access the TMP235A2DCKR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the ISOW7840FDWE schematic symbol, PCB footprint, and 3D model.

SSOP-16

80V, Low-/High-Side, Bi-Directional, Zero-Drift, Current Sense Amp w/Enhanced PWM Rejection

Use the download button to access the TPSM84424MOLR schematic symbol, PCB footprint, and 3D model.

Operational Amplifiers - Op Amps 1MHz 45uA RRIO Single Op Amp

SOIC-8

SSOP-16

Inverters AutoCat Hex Schmitt Trigger Inverter

SSOP-16

5V Flat-Clamp Surge Protection Device

Oscillator XO 156.25MHz ±50ppm LVPECL 55% 3.3V Medical 8-Pin QFM SMD T/R

Use the download button to access the PTHVD1450D schematic symbol, PCB footprint, and 3D model.

Single Schmitt-Trigger Inverter Gate

80V, Low-/High-Side, Bi-Directional, Zero-Drift, Current Sense Amp w/Enhanced PWM Rejection

Single Output LDO, 1A, Adj. (1.2 to 5.0V), Reverse Current Protection

Use the download button to access the INA828ID schematic symbol, PCB footprint, and 3D model.

High-Frequency Multi-Mode Synchronous Rectifier Controller

80V, Low-/High-Side, Bi-Directional, Zero-Drift, Current Sense Amp w/Enhanced PWM Rejection

Automotive Low-Power 96kHz Mono Audio Codec