Texas Instruments

The CD74HCT244EG4 is an octal non-inverting buffer and line driver from Texas Instruments in a 20-pin DIP package, compatible with TTL and CMOS logic levels up to 5.5 V. It features 3-state outputs and two active-low output-enable pins for flexible bus driving in TTL-to-CMOS interface circuits. Available from authorized distributors with worldwide shipping.

LVDS Interface IC

Operational Amplifiers - Op Amps

CD74HC4316ME4 is a quad SPST high-speed CMOS analog switch IC by Texas Instruments, featuring 200MHz bandwidth and wide supply range. Key specs: 16-pin SOIC package, 2V to 10V supply (VCC-VEE), 6V max input voltage, four independent bidirectional switches. From $0.85, in stock with worldwide shipping.

The SN74CB3T3257PWRE4 is a 3.3 V quad 2-to-1 bidirectional bus exchanger from Texas Instruments in a 16-pin TSSOP package. It features near-zero propagation delay switching with active-low enable control, suitable for voltage-level bus multiplexing in mixed 3.3 V systems. RoHS compliant with tape and reel packaging for automated assembly.

Bus Transceivers Quad Bus Interface

Single-chip 76-GHz to 81-GHz mmWave sensor integrating MCU and hardware accelerator

Interface - Signal Buffers, Repeaters Low Pwr Multi-Rate Two CH Retimer

Use the download button to access the ISO7821FDW schematic symbol, PCB footprint, and 3D model.

The CD74HC4316PWRG4 is a high-speed CMOS quad analog switch IC with four independent SPST channels in a 16-pin TSSOP package. It supports a wide supply range of 2 V to 10 V, 200 MHz bandwidth, and operates with dual or single supply up to 6 V. Available from Texas Instruments with worldwide shipping.

True 12-Bit, 8-channel, SPI, Vout DAC in tiny WCSP package with precision internal reference

Buffers & Line Drivers

True 12-Bit, 8-channel, SPI, Vout DAC in tiny WCSP package with precision internal reference

16-bit Microcontrollers - MCU

SN74ALS244CDBRG4 is an octal unidirectional buffer and line driver in the Advanced Low-power Schottky TTL family, featuring active-low output-enable control, 24 mA sink current capability, and 50 pF load capacitance rating in a 20-pin SOIC package. It is designed for driving high-capacitance bus lines, address buffers, and memory interface signals in industrial and computing systems.

Low Power Economy BiCMOS Current Mode PWM

The TLV431CDBV is a precision low-voltage adjustable shunt voltage reference from Texas Instruments. It offers an output voltage range of 1.24 V to 6 V with tight 0.5% accuracy in a compact SOT-23-5 package. Available from stock worldwide with fast shipping.

TLC5615IDG4 is a 10-bit single-channel serial DAC from Texas Instruments using a resistor-string architecture with SPI-compatible 3-wire interface and 5.1 V maximum analog output voltage. Offers 0.0977% maximum linearity error and binary input coding in a compact 8-pin SOIC package. Available from stock worldwide with competitive pricing.

Flip-Flops Octal D-Ty Edge Trig F-F W/3-State Otpt

The AM1707DZKB3 is a 32-bit fixed-point DSP/ARM microprocessor from Texas Instruments' AM17x series running at up to 375MHz. It features integrated cache, 16-bit external data bus, JTAG boundary scan, and operates at 1.8V/3.3V in a 256-pin BGA package. Available in stock with worldwide shipping.

Low Power Economy BiCMOS Current Mode PWM

LDO Voltage Regulators Dual-Output LDO Regulator

Digital to Analog Converters - DAC 12-Bit Serial Input Multiplying DAC

Supervisory Circuits Programmable-Delay Supervisory

High Speed Operational Amplifiers Low-Power Triple Current Feedback

e-trim 20MHz, High Precision CMOS Operational Amplifier

Use the download button to access the SN74LVC1G0832DBVT schematic symbol, PCB footprint, and 3D model.

Differential Amplifiers Fully Differential I/O Low Noise

Flip-Flops 10B Bus Interface Flip-Flops

113dB SNR Stereo DAC (H/W Control)

The CD74HC4511PWRG4 is a high-speed CMOS BCD-to-7-segment latch decoder and driver IC from Texas Instruments. It features latched inputs with 5.2 mA output sink current and 50 pF load capacitance support in a 16-pin SOIC package. Available in RoHS-compliant packaging with in-stock worldwide shipping.

SN74LS107ADG4 is a dual negative-edge-triggered JK flip-flop IC in the LS TTL logic family, housed in a 14-pin SOIC package. Each element has independent J, K, clock, and active-low asynchronous clear inputs with complementary Q and Q-bar outputs. It supports a maximum toggle frequency of 30 MHz and is used in binary counters, shift registers, and digital state machines.

Logic Gates Quad 2 input pos AND gates

Digital Bus Switch ICs 10B FETBus Switches

Analog to Digital Converters - ADC 24-bit 40kSPS 10-ch delta-sigma ADC w/ PGA, Vref, 2x IDACs, and AC excitation for factory automation 32-VQFN -40 to 125

LDO Voltage Regulators 500-mA, low-noise, low-IQ, low-dropout voltage regulator with reverse current protection 6-WSON -40 to 125

The TLV2461CPE4 is a single general-purpose rail-to-rail input/output operational amplifier from Texas Instruments, operating on ±3V or 6V single supply in an 8-pin PDIP through-hole package. It features 80dB typical common-mode rejection ratio, 14nA typical bias current, and 2200µV maximum input offset voltage for versatile analog signal processing. Available in stock with worldwide shipping for prototyping and production in low-power analog applications.

CD74HC4511PWTE4 is a high-speed CMOS BCD-to-7-segment latch decoder and driver from Texas Instruments. It features latched BCD inputs, 7-bit output decoding, 5.2mA output sink current, and a 16-pin TSSOP package. Available from stock worldwide for numeric display driving applications.

The CD74AC161M96 is a 4-bit synchronous presettable binary counter with asynchronous reset and carry-out (TCO) output in a 16-pin SOIC package. It supports up counting with synchronous load and operates from a 2 V to 5.5 V supply. Available from stock with worldwide shipping.

Digital to Analog Converters - DAC 16-Bit Dual Serial Input Multiplying

Use the download button to access the TPS2052AD schematic symbol, PCB footprint, and 3D model.

Texas Instruments THS6012CDWPG4 is a dual ADSL line driver IC in a 20-pin HSOP package supporting 9 V to 32 V single-supply or ±5 V to ±16 V dual-supply operation. Delivers high output current for driving telephone line transformers in ADSL CPE and CO equipment. Supplied in tube packaging and fully compliant with ADSL/ADSL2+ line driver requirements.

16-bit Microcontrollers - MCU Mixed Signal MCU

8-Bit Shift Registers With Output Registers

GREEN, PLASTIC, TSSOP-16

IC REG BUCK ADJ 1.2A 10MSOP

Analog to Digital Converters - ADC 24-bit, 40-kSPS, 5-ch delta-sigma ADC with PGA, VREF and IDACs for factory automation 32-VQFN -40 to 125

Analogue Switch ICs

Switching Voltage Regulators

NOR Gate 4-Element 2-IN CMOS 14-Pin SOP Tube