Texas Instruments

TMP6331QDYATQ1 is an automotive-grade 1% tolerance 100 kΩ linear NTC thermistor from Texas Instruments in a compact SOT-5X3 surface-mount package. It delivers accurate temperature sensing from -40°C to +150°C with a linear resistance response, ideal for AEC-Q200-qualified designs. Available globally with tape-and-reel packaging for automated assembly.

Board Mount Temperature Sensors Analog Temperature Sensor

TPSM63604 High-Density, 3-V to 36-V Input, 1-V to 16-V Output, 4-A Synchronous Buck DC/DC Power Module With Enhanced HotRod™ QFN Package

AEC-Q100 (grade 1) qualified for automotive applications • Compliant to LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2 A and ISO/DIS 17987–4 electrical physical layer (EPL) specification • Conforms to SAE J2602-1 LIN network for vehicle applications Supports 12-V battery applications • LIN transmit data rate up to 20 kbps • LIN receive data rate up to 100 kbps • Wide operational supply voltage range from 4 V to 36 V

Single-Bit Fixed Direction Voltage-Level Translator with Schmitt-Trigger Inputs and 3-State Outputs

Use the download button to access the TLIN1024ARGYRQ1 schematic symbol, PCB footprint, and 3D model.

Use the download button to access the DRV8243SQRXYRQ1 schematic symbol, PCB footprint, and 3D model.

Use the download button to access the MUX36D08IPWR schematic symbol, PCB footprint, and 3D model.

TRPGR30ATGC is a 12mm glass-encapsulated low-frequency read-only RFID transponder from Texas Instruments for passive animal and asset identification over 134.2kHz. Its biocompatible glass housing enables implantable and harsh-environment deployment for livestock tracking, pet identification, and industrial asset management applications.

TUSB7340RKMR is Texas Instruments' SuperSpeed USB 3.0 4-port xHCI host controller IC with PCI Express interface, supporting data transfer rates up to 5 Gbps per port and I2C configuration, housed in a 100-pin QFN package.

The LM22676QTJ-ADJ/NOPB is a 3 A SIMPLE SWITCHER step-down voltage regulator with adjustable output as low as 1.285 V, accepting 4.5 V to 42 V input, featuring precision enable in a compact TO-263-7 package for industrial and automotive designs.

Use the download button to access the LM2904BAQDGKRQ1 schematic symbol, PCB footprint, and 3D model.

Automotive CAN FD system basis chip with integrated LDO voltage regulator and watchdog timer. Supports data rates up to 8 Mbps and meets AEC-Q100 Grade 1 qualification. Available in a compact 14-pin SOIC package for automotive ECU designs.

The TL2575HV-33IKTTR is a 3.3 V fixed-output step-down switching regulator with a 60 V input rating and 1 A output current. It operates at 52 kHz with voltage-mode control, requiring minimal external components. Available from authorized distributors with worldwide shipping.

TPS272C45CRHFR is a dual-channel 45 V high-side smart power switch from Texas Instruments with built-in over-current, over-voltage, and thermal protection. It integrates two independent channels in a compact 24-pin QFN package for robust load switching in industrial systems.

Texas Instruments TPS54335ADRCT is a 3 A synchronous step-down converter accepting 4.5 V to 28 V input with adjustable output from 0.8 V to 24 V. Current-mode PWM control delivers fast transient response in a 10-pin MSOP package. In stock worldwide with competitive pricing.

ARM Microcontrollers - MCU Automotive C2000 32-bit MCU 120-MHz 384-KB flash, FPU, TMU with CLA, CLB, AES and CAN-FD

The TPS565242DRLR is a voltage-mode PWM synchronous buck switching regulator from Texas Instruments accepting 3 V to 16 V input in a compact SOT-23-like 6-pin flat-lead package. It provides regulated output for point-of-load power conversion in space-constrained applications. RoHS-compliant and available from worldwide authorized distributors with strong inventory levels.

The THVD1420DRLR is a 3.3 V to 5 V RS-485/RS-422 line transceiver in an 8-pin SOT-23 flat lead package by Texas Instruments. Key specs: 12 Mbps data rate, ±12 kV IEC ESD protection, differential Schmitt trigger input. Available in stock with worldwide shipping.

Board Mount Temperature Sensors 0.5°C Accurate 2-pin Temperature Sensor with a Pulse Train Interface 2-TO-92 -50 to 150

ADC12DJ5200RFZEG is a dual-channel 12-bit ADC sampling at up to 5.2 GSPS per channel with a ±0.825 V differential input range. It integrates JESD204C serial output in a 144-pin BGA package for high-speed RF signal acquisition. Sourced from Texas Instruments with worldwide distribution.

Texas Instruments TPS63901YCJR is a ultra-low quiescent current buck-boost converter with only 75 nA operating IQ and a 1.8 V to 5.5 V input range in a 12-ball WCSP package. It delivers up to 1 A output current and maintains regulation across single-cell battery voltages. Available from stock worldwide with fast shipping.

TPS92643QPWPRQ1 is an AEC-Q100 automotive-grade 3 A synchronous buck infrared LED driver from Texas Instruments in a 16-pin HTSSOP package. It delivers accurate single-channel LED current control for automotive LiDAR and IR sensing systems. RoHS-compliant with e4 finish, available in tape-and-reel packaging for high-volume automotive production.

Use the download button to access the AM5729BABCXA schematic symbol, PCB footprint, and 3D model.

Texas Instruments TPS62A01ADRLR is a voltage-mode PWM synchronous buck regulator with 2.5 V to 5.5 V input range in a tiny SOT-23-6 package. Converts 5 V bus to lower core voltages with high efficiency. Available from stock with worldwide shipping.

Enhanced automotive dual CAN transceiver with standby and 1.8-V IO support

Use the download button to access the HD3SS3411IRWAT schematic symbol, PCB footprint, and 3D model.

ENCODER, 16 Pin, Plastic, DIP

Operational Amplifiers - Op Amps Automotive-grade, quad, 40-V, 4.5-MHz, low-power operational amplifier

Switching Voltage Regulators 5.5-V input, 1-A step-down converter with integrated inductor and forced PWM mode in uSiP package 10-uSiP -40 to 125

Phase Locked Loops - PLL 3-GHz to 7.5-GHz delta-sigma low power dual PLL for RF personal communications 24-WQFN -40 to 85

The TLV76728DGNR is a fixed 2.8 V output, 1 A, 16 V-rated LDO linear regulator with a 0.9 V nominal dropout voltage. Rated from -40°C to 125°C and packaged in an 8-pin HVSSOP, it suits industrial and automotive power supply rails. Provides stable 2.8 V at up to 1 A from inputs up to 16 V.

The LM21212MH-2/NOPB is a voltage-mode synchronous buck regulator from Texas Instruments delivering up to 12 A from a 2.95 V to 5.5 V input. It uses PWM control with adjustable switching frequency and is housed in a 20-pin SOIC package, suited for high-current point-of-load power conversion.

Switching Controllers 3.5-V to 65-V low-IQ, dual output, stackable synchronous buck DC-DC controller

TPS63000DRCRG4 is a high-efficiency buck-boost switching regulator achieving up to 96% efficiency with a 1.8 V to 5.5 V input range and adjustable output from 1.2 V to 5.5 V. It operates in current-mode PWM control and delivers up to 1.2 A output current from a single-cell Li-Ion battery through both buck and boost modes. Packaged in a 10-pin QFN for space-efficient integration in portable and wireless power applications.

TLVM13620RDHR is a non-isolated point-of-load DC-DC converter module from Texas Instruments delivering 2 A output at 1 to 6 V from a 3 to 36 V input. It integrates inductor and control circuitry in a compact 30-pad LGA package. Available from stock worldwide with competitive pricing.

Use the download button to access the PTN78060WAD schematic symbol, PCB footprint, and 3D model.

TPS65321AQPWPRQ1 is an automotive-grade synchronous buck converter with input voltage range of 3.6V to 36V, featuring adjustable output voltage from 1.1V to 20V and an integrated LDO regulator. Available in a compact 14-Pin HTSSOP EP package with AEC-Q100 qualification for reliable automotive use.

Texas Instruments TPSM828212SILR is a 1 A step-down power module with an integrated inductor, accepting 2.4 V to 5.5 V input for compact, low-component-count designs. It uses current/voltage-mode PWM control and fits into a 10-pin DMA module package. Available from stock worldwide with competitive pricing.

LDO Voltage Regulators 800-mA, high-accuracy, low-dropout voltage regulator with enable 5-DDPAK/TO-263 -40 to 125

Transimpedance Amplifiers

Buck Switching Regulator IC Positive Fixed 5V 1 Output 3A TO-263-8, D2PAK (7 Leads + Tab), TO-263CA

Use the download button to access the SN65MLVD3DRBT schematic symbol, PCB footprint, and 3D model.

Non-Isolated DC/DC Converters 1.2 to 5.5V 10A 12V Input WideAdj Module

Use the download button to access the CD4532BPWR schematic symbol, PCB footprint, and 3D model.

Logic Gates 4-ch, 2-input 2-V to 6-V high-speed (12 ns) OR gate with Schmitt-trigger inputs 14-SOT-23-THIN -40 to 125

Power Management Modules 3.6-V to 36-V input, 1-V to 12-V output, 2-A, step-down module in 4-mm x 6-mm x 1.8-mm package

The TPS56428RHLR is a synchronous step-down DC-DC converter accepting 4.5 V to 18 V input and delivering an adjustable 0.6 V to 7 V output at up to 4 A. It uses D-CAP2 PWM control for fast transient response in a compact 14-pin VQFN package. Available from authorized distributors with worldwide shipping.

Hot Swap Voltage Controllers Automotive reverse polarity protection controller, overvoltage protection, gate drive strength 11 mA 8-SOT-23-THIN -40 to 125

Bluetooth Modules - 802.15.1 Bluetooth dual mode HCI module