Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
35,209
Total Products
98
Categories
All Texas Instruments Components
Showing 14,151–14,200 of 35,209
Hall Effect Sensor Omnipolar 3.3V/5V/9V/12V/15V/18V/24V Automotive 3-Pin SOT-23 T/R
Use the download button to access the PDRV5033FAEDBZRQ1 schematic symbol, PCB footprint, and 3D model.
2.7-4V Dual In/Single Out MOSFET, 0.5A Main/0.1A Aux Input, Act-High Enable, Comm. Temp.
Differential Amplifiers Hi-Sp Prec Gain of 0.2 Lvl Translation
Interface - I/O Expanders Remote 16-Bit I2C & SMBus I/O Expander
V-Ref Precision 2.5V 20mA 8-Pin SOP T/R
LDO Regulator Pos 1.8V 0.15A 5-Pin SOT-23 T/R
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin SOIC T/R
The TPS2811DG4 is a dual inverting high-side MOSFET gate driver in SOIC-8 package. Features 2A peak output current, Schmitt trigger inputs, totem-pole outputs, and NAND gate-based logic for direct PWM control. Available from stock worldwide with competitive pricing.
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin SOIC Tube
LDO Voltage Regulators Sgl Output LDO 150mA Fixed
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin SOIC Tube
Flip-Flops Tri-State 3.3V Octal
Use the download button to access the CD4020BF schematic symbol, PCB footprint, and 3D model.
POWER, PLASTIC, TO-220, 3 PIN
RS-422/RS-485 Interface IC Quadruple Diff Line Receiver
Quad Transmitter RS-422 16-Pin PDIP Tube
CAN Interface IC 3.3-V CAN Transceivr Transceivers
Use the download button to access the SN74LVTH574DB schematic symbol, PCB footprint, and 3D model.
The 74AHCT1G125DBVTE4 is a single-channel non-inverting 3-state buffer and line driver from Texas Instruments in a 5-pin SOT-23 package. It features active-low output enable, 8 mA drive current, and AHCT-series CMOS technology for 5V TTL-compatible operation. Available from stock with worldwide shipping.
Single Bus Buffer Gate With 3-State Output
LED Lighting Drivers LED Lighting Pwr Cntrlr
Buffer/Line Driver 8-CH Non-Inverting 3-ST CMOS 20-Pin SOIC Tube
RS-232 Interface IC 5V Dual Line Driver/Receiver
Current Mode PWM Controller 1.5A 16-Pin PDIP Tube
TEXAS INSTRUMENTS - LMV821DCKTE4 - OP AMP, LOW VOLT RRO/P, SC-70, 821
Operational Amplifiers - Op Amps Dual Op Amp
The MAX202IDWG4 is a 5V dual RS-232 line driver/receiver IC from Texas Instruments compliant with EIA-232-F and TIA-232-F standards, housed in a 16-pin SOIC package. Key specs: 2 drivers and 2 receivers, Schmitt trigger inputs, 200µA high-level input current. Available in stock with worldwide shipping.
Buffer/Line Driver 8-CH Non-Inverting 3-ST CMOS 20-Pin SSOP T/R
Dual Channel, 26V, Low-/High-Side Voltage Output Current Sense Amp
SOIC-8
LDO Voltage Regulators 500-mA, 10-V, low-dropout voltage regulator with enable 6-WSON -40 to 125
Dual Transmitter/Receiver RS-232 16-Pin TSSOP T/R
TEXAS INSTRUMENTS - TSV914AIPWT - Operational Amplifier, 4 Amplifier, 8 MHz, 4.5 V/µs, 2.5V to 5.5V, TSSOP, 14 Pins
The UCC28811DG4 is an LED lighting power controller IC designed for offline LED driver applications in an 8-Pin SOIC plastic package. Provides single-function primary-side regulated power control for LED lighting systems. Available from stock with worldwide shipping.
Use the download button to access the LMZM23600V5SILT schematic symbol, PCB footprint, and 3D model.
8-Bit, 10 us DAC, Serial Input, Quad DAC, Pgrmable 1x or 2x Output, Simultaneous Update
Digital to Analog Converters - DAC 8-Bit 10 us DAC Serial In Quad DAC
The UCC21222D is a dual-channel isolated gate driver IC from Texas Instruments featuring 3.0kV RMS isolation, 4A source and 6A sink drive current, and programmable dead time. It supports half-bridge IGBT and MOSFET topologies with built-in transient and undervoltage protection in a 16-pin SOIC package.
The REF6125IDGKT is a high-precision 2.5V series voltage reference from Texas Instruments, offering ultralow noise and excellent temperature stability for demanding analog applications. Operating from a 3V to 5.5V input supply, it provides stable output with low drift in a compact 8-pin VSSOP package. Ideal for precision ADC/DAC reference, industrial instrumentation, and data acquisition systems requiring tight voltage accuracy.
Switching Voltage Regulators Switched-Capacitor Voltage Converter
Digital to Analog Converters - DAC Quad 8bit DigitAL/AN
8-Bit, 10 us Quad DAC, Serial Input, Pgrmable for 1x or 2x Output, Simultaneous Update, Low Power
TEXAS INSTRUMENTS - LMZM23600SILT - DC-DC CONVERTER, 2.5V-15V, 0.5A
Differential Amplifiers Hi-Sp Prec Gain of 0.2 Lvl Translation
10-bit, single-channel, low-power DAC with 12.5us settling time and power-on reset
High Speed Operational Amplifiers Dual Wideband Voltage Feedback
Integrated Power-Amplifier Monitor and Control System
Texas Instruments LMV821IDBVTG4 Op Amp, 5.5MHz Rail-Rail, 3 V, 5-Pin SOT-23
TEXAS INSTRUMENTS - CDCLVC1103PW - CLOCK BUFFER, 180MHZ, TSSOP-8
Need Texas Instruments Components?
Get competitive quotes from authorized China distributors
Request a Quote