Texas Instruments

Texas Instruments OPA357AIDDAG3 is a single-channel 250 MHz rail-to-rail input/output CMOS operational amplifier in an SC70-5 package. It delivers 80 dB CMRR, 50 fA input bias current, and runs from 2.7 V to 5 V single supply. Available from stock worldwide with fast shipping.

Analog to Digital Converters - ADC

Use the download button to access the TMP117MAIYBGT schematic symbol, PCB footprint, and 3D model.

Digital Isolators 3Ch 25mbps dig isolator 2:1

Texas Instruments CD74HC173NSRE4 is a high-speed CMOS quad D-type flip-flop with dual output enable, operating at 2V to 6V supply, featuring 4-bit storage, tri-state outputs, and 50pF load capacitance in a 16-pin SOIC package. Available in stock worldwide.

CD74HC173NSR is a 4-bit D-type register bus driver IC from Texas Instruments with dual output enable in the HC/UH CMOS family. It features 6 mA output drive, 50 pF load capacitance, and a 16-pin SOIC package in tape-and-reel. Available from stock worldwide with fast shipping.

Current Sense Amplifiers A 595-INA302A2IPW

TEXAS INSTRUMENTS - TMS320F2806PZQ - Digital Signal Controller, 100 MHz, 64 KB, 35 I/O's, ECAN, I2C, SCI, SPI, 1.8 V

Automotive 300-mA high-voltage ultra-low-IQ low-dropout (LDO) linear regulator

The PINA293A1QDBVRQ1 is an automotive-grade 110V high-voltage, high-bandwidth unidirectional current sense amplifier from Texas Instruments in a 5-pin SOT-23 package, featuring 140 dB minimum CMRR, 200 µV maximum offset voltage, and AEC-Q100 qualification for harsh automotive environments. Ideal for battery and motor current monitoring in EV systems. Available from stock worldwide with fast shipping.

Texas Instruments PINA293A2QDBVRQ1 is an automotive-grade unidirectional current sense amplifier with 110V common-mode range and 160 dB CMRR. It features 200 µV max input offset voltage for precise high-side current measurement in a compact SOT-23-5 package. AEC-Q100 qualified for reliable automotive powertrain and battery management designs.

PINA293A5QDBVRQ1 is a Texas Instruments automotive-grade current-feedback operational amplifier in a 5-pin SOT-23 package with 160 dB common-mode rejection ratio. It features 110 V common-mode input voltage range and 200 µV maximum input offset voltage. Available worldwide from authorized distributors with competitive pricing.

Switching Controllers Wide Input Sync Buck Cntrlr w/DDR trking

Use the download button to access the TPS54331DDA schematic symbol, PCB footprint, and 3D model.

Use the download button to access the ISO1452BDW schematic symbol, PCB footprint, and 3D model.

Switching Voltage Regulators

Texas Instruments PINA293A3QDBVRQ1 is an automotive-grade, unidirectional current sense amplifier supporting up to 110 V common-mode voltage. It features 140 dB minimum CMRR and 30 µA maximum bias current. Available in a compact SOT-23-5 package with AEC-Q100 qualification for automotive applications.

0.6-A Ultra-small synchronous step-down converter

RS-232 Interface IC 3V-5.5V Multichannel RS-232 Line Drvr/Rec

Supervisory Circuits Ultra-Low Voltage Processor

Operational Amplifiers - Op Amps Quad Low-Pwr Op Amp

Use the download button to access the TPS77501DR schematic symbol, PCB footprint, and 3D model.

Isolated RS-485/RS-422 Transceiver

LM3S1608-IBZ50-A2T is a 32-bit ARM Cortex-M3 microcontroller from Texas Instruments with 128 KB flash, 52 I/O lines, on-chip ADC, and boundary scan support, operating at up to 8.192 MHz. Housed in a 108-ball BGA package and rated for industrial temperatures, it targets embedded control and sensor interface applications.

Use the download button to access the DRV8847RTER schematic symbol, PCB footprint, and 3D model.

Switching Controllers Wide Input Sync Buck Cntrlr w/DDR trking

24MHz 105C ULP Microcontroller With 16 KB FRAM, 2 KB SRAM, 44 IO, 12-bit ADC, 12-bit DACs, OpAmp/PGA

Latches OCTAL D-TYPE LATCH

The TLV5625IDRG4 is an 8-bit dual-channel digital-to-analog converter (DAC) from Texas Instruments featuring serial SPI interface, 2.5 to 12 µs settling time, and 2.6 V maximum analog output voltage. It supports single-supply operation from 2.7 V to 5.5 V with low power consumption, making it suitable for portable instrumentation, signal generation, and industrial control systems.

Operational Amplifiers - Op Amps Quad Lo-Pwr JFET-Inp Gen-Purp Op Amp

TEXAS INSTRUMENTS - LMH6553SDE - DIFF AMP, 900MHZ, 8LLP, POWERWISE

Texas Instruments SN74CBT3345CDBRE4 is a 16-bit bus switch and buffer driver with 3-state outputs in a 20-pin SOIC package. Features CBT family near-zero propagation delay switching and 50pF load capacitance for high-speed bus interfacing. Available from stock with worldwide shipping.

Supervisory Circuits Current/Supply-Volt Supervisory

Operational Amplifiers - Op Amps Single MicroPwr RRIO

DIP-20

Analog to Digital Converters - ADC 12Bit 66kSPS Ser Out Prog MSB/LSB First

The PDRV8874QPWPRQ1 is an AEC-Q100-qualified automotive brushed DC motor driver IC from Texas Instruments delivering up to 6 A output current with integrated current sensing in a 16-pin small outline package. It features a half-bridge architecture with a built-in current sense output for closed-loop motor control in harsh automotive environments. Available from global distributors with worldwide shipping.

Analog to Digital Converters - ADC 12Bit 66kSPS Ser Out Prog MSB/LSB First

14MHz, MUX-friendly, low-noise, zero-drift, RRO, CMOS precision operational amplifier

Switching Controllers Low Power Economy BiCMOS Current Mode

Latches 16B Transparent D-Type

RS-232 Interface IC 3 to 5.5V Multichan RS-232 Line Drv/Rec

Texas Instruments MAX208CDBRG4 is a 5V multi-channel RS-232 line driver and receiver IC in SOIC-24 package. Features 4 drivers and 4 receivers with Schmitt trigger inputs compliant with EIA-232-F/TIA-232-F/V.28 standards. Available from stock worldwide with competitive pricing and fast shipping.

LMC6084AIN is an operational amplifier by Texas Instruments. Key specs include Average Bias Current-Max (IIB): 0.000004 µA; Bias Current-Max (IIB) @25C: 0.000004 µA. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

RS-232 Interface IC 3V-5.5V Multch RS232 Comp Line Drvr/Rcvr

RS-232 Interface IC 3V-5.5V Multch RS232 Comp Line Drvr/Rcvr

Switching Controllers Low Power Economy BiCMOS Current Mode

High Speed Operational Amplifiers 175-MHz Low-Power Vltg-Feedback Dual

Adjustable precision shunt regulator

PLM2904LVIDDFR is a low-voltage dual operational amplifier from Texas Instruments featuring current-feedback architecture, 63 dB minimum CMRR, and 5000 µV max input offset voltage, available in compact SOT23-8 package with worldwide shipping.