Texas Instruments

Dual Output Low-Dropout Voltage Regulator

10A H-Bridge Motor Driver with Integrated Current Sensing and Current Sense Output

Regulated 3.3V 100mA, low-battery detector, low-ripple charge pump with Ultra low operating current

LOGIC GATES AND INVERTERS

Motor / Motion / Ignition Controllers & Drivers 10A H-Bridge Motor Driver with Integrated Current Sensing and Current Sense Output

10A H-Bridge Motor Driver with Integrated Current Sensing and Current Sense Output

Inverter 6-Element Bipolar 14-Pin SOIC Tube

150mA, High PSRR, Low Quiescent Current, Low Noise LDO

Buffers & Line Drivers Octal Buffers and Line Drivers

Motor / Motion / Ignition Controllers & Drivers 2A Stepper Motor Driver With Integrated Current Sense

2-Channel, 1MHz, RRIO, 1.8V to 5.5V Operational Amplifier for Cost-Optimized Systems

SP Amp LOG Amp Single ±18V 8-Pin SOIC T/R

MCU 32-bit Piccolo F2805x C28x RISC 64KB Flash 3.3V 80-Pin LQFP Tray

LDO Voltage Regulators 200mA High PSRR LDO

3-phase sensored trapezoidal brushless-DC controller for -40 to +85°C applications

Interface - Specialised 7-Bit Bus Interfaces With 3-State Outputs

The SN74132N3 is a quad 2-input positive-NAND gate with Schmitt-trigger inputs from Texas Instruments in the TTL logic family. It provides four independent NAND gates with hysteresis inputs for noise-immune signal conditioning, operating from 0°C to 70°C in a 14-pin DIP package. Available in stock with worldwide shipping.

BiCMOS Power Factor Preregulator

Operational Amplifiers - Op Amps Low-Noise High-Speed JFET-Input

IC PERIPHERAL DRVR DUAL HS 8-DIP

Buffer/Line Driver 8-CH Non-Inverting 3-ST CMOS 20-Pin SOP Tube

98dB SNR Low-Power Stereo DAC with HP Amplifier (H/W Control)

Voltage References Lo-Vtg Adj Precision Shunt Regulator

The TL7726CDRG4 is a 6-channel analog clamping circuit from Texas Instruments in an 8-pin SOIC package, designed to protect sensitive logic inputs from voltage spikes and overvoltage transients in mixed-signal and digital systems. It clamps input signals to safe voltage levels, preventing damage to CMOS and TTL logic ICs during electrostatic discharge events or inductive switching. Available in stock worldwide for signal protection and ESD clamping applications.

Voltage References High-bandwidth low-IQ programmable shunt regulator 3-SOT-23 -40 to 125

Voltage References Lo Noise Very Low Drift Prec VLTG REF

UCC3895QTR is a phase-shift resonant-mode PWM switching controller by Texas Instruments, supporting voltage-mode and current-mode control. Key specs: 10V–16.5V input range, 20-pin PLCC package, pulse-width modulation with soft-switching capability. From $2.50, in stock with worldwide shipping.

Bus XCVR Dual 16-CH 3-ST 56-Pin SSOP Tube

Power Management Specialized - PMIC Hex Clamping Circuit

Full Speed USB to Serial Port Controller USB 2.0 3.3V Tube 32-Pin VQFN EP

Adjustable precision shunt regulator

NAND Gate 4-Element 2-IN CMOS 14-Pin TSSOP T/R

Texas Instruments TPS2376DG4 is an IEEE 802.3af compliant Power over Ethernet powered device controller managing PoE classification, detection, and power-up sequencing in a single 8-pin SOIC package. Supports single-channel operation with integrated protection features. Available from stock with worldwide shipping.

The UCC27223PWPR is a dual-output high and low side gate driver from Texas Instruments, delivering 3.3 A peak output current with voltage-mode PWM control. It supports input voltages from 4.4 V to 20 V in a 14-pin HTSSOP package with exposed pad. From $1.80 in stock with worldwide shipping.

NAND Gate 4-Element 2-IN CMOS 14-Pin SOIC Tube

NAND Gate 4-Element 2-IN CMOS 14-Pin SOIC Tube

Power Switch ICs - POE/LAN IEEE 802.3af PoE Pwr Device Cntrler

NAND Gate 4-Element 2-IN CMOS 14-Pin SOIC T/R

LED Lighting Drivers 8B Constant-Current LED Sink

Standard Timer Dual 14-Pin SOIC T/R

DAC 1-CH Resistor-String 16-bit 16-Pin TSSOP T/R

The TLC27L2CPS is a dual precision single-supply micropower operational amplifier in DIP-8 package. Features 0.06 nA bias current at 25°C, 94 dB typical CMRR, and ultra-low power consumption for battery applications. Available from stock worldwide with competitive pricing.

Transistor Output Optocouplers Single-Channel Optocoupler/Optoisolator 4-PDIP

Analog to Digital Converters - ADC 16B Pseud Diff Input 200kSPS Serial Out

Encoders, Decoders, Multiplexers & Demultiplexers 8 to 1-Line Data Selector/Multiplexer

Encoders, Decoders, Multiplexers & Demultiplexers 8 to 1-Line Data Selector/Multiplexer

Use the download button to access the DAC8581IPWR schematic symbol, PCB footprint, and 3D model.

TSSOP-16

Use the download button to access the OPT8320NBP schematic symbol, PCB footprint, and 3D model.

Transistor Output Optocouplers Single-Channel Optocoupler/Optoisolator 4-PDIP