Texas Instruments

Flip-Flops Octal FET Bus Switch

Latch Transparent 3-ST 8-CH D-Type 20-Pin SOP Tube

The SM72375 is an analog comparator IC from Texas Instruments designed for precision voltage comparison. Offers high-speed response, wide supply voltage range, and small outline package. Available from stock with worldwide shipping.

Use the download button to access the MSP430FR2475TPTR schematic symbol, PCB footprint, and 3D model.

16-bit Microcontrollers - MCU Ultra low power Micro Controller

Buffers & Line Drivers Octal Buffer/Driver With 3-State Outputs

The POPA4990IPWR is a quad rail-to-rail input/output operational amplifier with a 40 V supply range, 1 MHz gain-bandwidth product, and 1.5 mV maximum input offset voltage. It delivers low-power performance with 115 dB typical CMRR in a 14-pin SOP package. Available from Texas Instruments, in stock with worldwide shipping.

PTLV9101IDBVR from Texas Instruments is a amplifier for measurement front ends, current sensing, instrumentation, and analog signal chains. Key specifications include 1MHz, 0A, 5 pins, -40°C to 125°C, SOT-23 package/footprint, supporting reliable selection for OEM maintenance, prototyping, and production BOMs. The SOT-23 format supports standard assembly and sourcing workflows.

Texas Instruments PTLV9104IDR is a quad rail-to-rail input/output operational amplifier with 1 MHz gain-bandwidth, 16 V supply range, 1.75 mV maximum offset voltage, and 110 dB CMRR. Designed for precision signal conditioning, filtering, and low-power sensing in portable and industrial applications.

Texas Instruments GD75232DWE4 is a multi-channel RS-232 line transceiver with 3 drivers and Schmitt-trigger inputs, operating from a 4.5 V to 15 V supply in a 20-pin SOIC package per EIA-232-F standard. Available in stock with worldwide shipping.

SNV54HC373J is an octal D-type transparent latch from Texas Instruments in the HC high-speed CMOS logic family. It provides 8 latched outputs with 3-state control, operating from a 2 V to 6 V supply for military-grade designs. Housed in a ceramic DIP package for high-reliability applications.

DIP-8

16-bit Microcontrollers - MCU

Latches 8407201RA, Octal Tranp D-Type Latch 3-St

Buffer/Line Driver 8-CH Inverting 3-ST Bipolar 20-Pin CDIP Tube

Voltage References

AND Gate 2-Element 4-IN Bipolar 14-Pin CDIP Tube

Overvoltage Protection for 2-Series, 3-Series, and 4-Series Cell Li-Ion

ONET4201PARGTT is a limiting amplifier from Texas Instruments supporting 1 to 4.25 Gbps data rates with LOS detection and RSSI functions in a 16-pin QFN package. It is designed for SDH and SONET optical receiver front-ends. Available from stock worldwide with competitive pricing for high-speed optical communication designs.

Logic Gates Quadruple 2-Input Positive-AND Gate

Clock Drivers & Distribution 3.3V x4 Clock Mult

The ISO7761QDBQRQ1 is an automotive-grade 6-channel CMOS digital isolator from Texas Instruments, supporting data rates up to 100 Mbps in a 16-pin SSOP package. It operates from a 2.25 V to 5.5 V VCC2 supply and is compatible with both 3.3 V and 5 V logic rails for automotive control systems.

Interface - Signal Buffers, Repeaters A 595-DS250DF230ZLST

The SNV54LS374J is an octal D-type flip-flop with 3-state outputs in a ceramic DIP package, featuring 8 edge-triggered flip-flops with a common clock and output-enable pin. It operates over the military temperature range of -55°C to 125°C. Available with worldwide shipping.

Inverters Hex Inverters

The ADC08031BIWMX is an 8-bit, single-channel successive approximation analog-to-digital converter from Texas Instruments with serial SPI-compatible output in a dual-in-line package. It converts analog signals with up to 100 kHz sampling rate for microcontroller-based data acquisition. Available from authorized global distributors for embedded system and instrumentation designs.

Digital Bus Switch ICs Dual Bus Sw Vltg Translator

Precision Amplifiers Hi Spd Hi Drive Precision Quad OpAmp

Use the download button to access the SN74AHC1G08DRLR schematic symbol, PCB footprint, and 3D model.

Hot Swap Voltage Controllers 2.7-V to 19-V, 85m , 0.13-2A eFuse with selectable over voltage protection clamp in leaded package 8-SO PowerPAD -40 to 125

DAC 1-CH R-2R 16-bit 8-Pin WSON T/R

Digital Signal Processors & Controllers - DSP, DSC

Use the download button to access the DAC70501MDQFR schematic symbol, PCB footprint, and 3D model.

Precision Amplifiers Quad Low-Noise High-Speed Precision

The CD74HC4040ME4 is a high-speed CMOS 12-stage binary ripple counter operating up to 20 MHz from a 2V to 6V supply in a 16-pin SOIC package. It counts upward on falling clock edges with a master reset input for synchronous clearing of all stages. Available from stock worldwide for frequency division, timing, and sequencing applications.

Hot Swap Voltage Controllers 2.7-V to 19-V, 85m , 0.13-2A eFuse with selectable over voltage protection clamp in leaded package 8-SO PowerPAD -40 to 125

Switching Voltage Regulators Automotive 2.75-V to 6-V, 2-A step-down converter in a 2mm x 3mm wettable-flanks QFN package 9-VQFN-HR -40 to 125

Buffers & Line Drivers Octal Buffer Driver

The TLE2144MJB is a quad general-purpose operational amplifier with ±22V supply voltage capability and 108dB typical common-mode rejection ratio. It features voltage-feedback architecture with 1.5µA max bias current per channel in a 14-pin ceramic DIP package. Available from stock with worldwide shipping.

High Speed Operational Amplifiers Wideband Operational Amplifier

Texas Instruments ADC08031CIN is an 8-bit successive approximation ADC with a single analog input channel, 8 µs conversion time, and 5 V supply voltage. Available in DIP-8 package with worldwide shipping.

Conv DC-DC 0.8V to 3V Step Up Single-Out 3V 0.2A 10-Pin VSSOP T/R

DC-DC Converters Step-Down Adjustable 1 8V 75V 1A HTSSOP-14 RoHS

Gates and Inverters TSSOP-14 RoHS

Use the download button to access the UC1844AJ schematic symbol, PCB footprint, and 3D model.

General Purpose Audio Codec 2ADC / 2DAC Ch 24-Pin SSOP Tube

Texas Instruments SN74CBT3383CDGVRE4 is an 8-bit dual-supply bidirectional bus switch with active-low enable in a 24-pin SOIC package. It supports 50 pF load capacitance per channel and provides near-zero propagation delay for high-speed bus switching. Available in stock with worldwide shipping.

TLV3404CD is a quad nanopower open-drain comparator with 100 nA typical bias current and 3.6 mV maximum input offset voltage. It provides 4 independent comparator channels in a 14-pin SOIC package for space-efficient threshold detection circuits. Suited for battery-powered systems requiring ultra-low quiescent current.

LDO Voltage Regulators Micropower PMOS Adjustable

Texas Instruments