Texas Instruments

Analog Switch Single SPST 5-Pin SC-70 T/R

Inverting High-Speed MOSFET Drivers

TLV3011AIDBVTG4 is a low-power analog comparator with open-drain output from Texas Instruments. It features 10 pA input bias current, 12 mV max input offset voltage, and operates in a compact 6-pin SOT-23 package. Available from stock with worldwide shipping.

Use the download button to access the OPA2369AIDGKR schematic symbol, PCB footprint, and 3D model.

Low-capacitance, 1:1 (SPST) 4-channel, powered-off protection switch with 1.8-V logic

Use the download button to access the TMUX1511RSVR schematic symbol, PCB footprint, and 3D model.

Analog Switch ICs 14O Dual SP4T Ana Sw

Texas Instruments UC2705NG4 is a MOSFET power driver IC with 1.5A peak output current in a totem-pole complementary output configuration. Features buffer/inverter-based MOSFET driver interface with standard input characteristics, single-function low-side drive design without high-side capability. Available in through-hole 8-pin PDIP package with RoHS-compliant lead-free construction. In stock worldwide with fast shipping.

Inverter Schmitt Trigger 1-Element CMOS 5-Pin SOT-23 T/R

Multiplexer Switch ICs Dual 1-of-4 FET Mult Demult 2.5V/3.3V

Quadruple Positive-OR Gates With Schmitt-Trigger Inputs

Use the download button to access the TPS72525DCQ schematic symbol, PCB footprint, and 3D model.

2.2MHz wide VIN non-synchronous boost controller

Voltage Level Translator 24-Pin TSSOP Tube

Operational Amplifiers - Op Amps Quad Micropwr Rail-to-Rail

3.3-V to 5-V RS-485 transceiver with surge protection

Inverter Schmitt Trigger 1-Element CMOS 5-Pin SC-70 T/R

DSP Fixed-Point 32bit 100MHz 100MIPS 100-Pin LQFP

Switching Voltage Regulators 3-17V 3A SD Cnvrtr

Switch ICs - Various Quad SPDT Hi-BW 10/ 100 Base-T Lan Sw

Switching Controllers 2.2-MHz wide VIN nonsynchronous boost, flyback, & SEPIC controller with hiccup 12-WSON -40 to 125

Op Amp Quad Low Power Amplifier R-R I/O ±1.8V/3.6V 14-Pin TSSOP Tube

Interface - CODECs Stereo Low Pwr Voice Band Codec

Operational Amplifiers - Op Amps Dual Lo-Pwr JFET-Inp Gen-Purp Op Amp

Analog Comparators Quad Nanopower Push-Pull Comparator

Battery Management Multi-Cell Synch Sw- mode Charger

Use the download button to access the ISO1042BDWVR schematic symbol, PCB footprint, and 3D model.

Switching Controllers Wide Vin Synch Buck DC/DC Contr

Flip Flop D-Type Pos-Edge 2-Element 14-Pin SOIC Tube

IC 8-BIT SHIFT REGISTER 14-DIP

High accuracy 3.3 V or 5 V digital PWM-output Hall effect sensor family

Operational Amplifiers - Op Amps Single-Supply Rail-to-Rail

Audio Amp Headphone/Speaker 2-CH Stereo/3-CH Stereo 20W Class-D 64-Pin HTQFP EP Tray

SN74HC00 Quadruple 2-Input Positive-NAND Gates

Buffer/Driver 6-CH Inverting Open Collector Bipolar 14-Pin SOP Tube

Use the download button to access the DAC81408RHAT schematic symbol, PCB footprint, and 3D model.

Battery Management 6-Ch Pwr Mgmt IC for Li-Ion Systems

6-channel Power Management IC (PMIC) with 3DC/DCs, 3 LDOs, I2C interface and Dynamic Voltage Scaling

Texas Instruments TPS728330185DRVT, LDO Voltage Regulator, 200mA Adjustable, 0.9 → 3.6 V, 3% 6-Pin, SON

Texas Instruments TPS65198RUYT, Voltage Supervisor 28-Pin, WQFN

3.3V, Full-Duplex RS-485, 12kV IEC ESD, 50Mbps data rate, No Enables

Inverters Dual Schmitt-Trigger Inverter 6-SC70 -40 to 125

Low-Noise, High-Speed, 16-Bit Accurate CMOS Operational Amplifier with digital shutdown

Digital to Analog Converters - DAC 12-Bit CMOS 4-Quad Multiplying Cnvtr

Switching Controllers 2.2-MHz wide VIN, 1.5-A MOSFET driver, non-synchronous boost controller 12-WSON -40 to 125

LED DRVR 10Segment 3.3V/5V/9V/12V/15V 6-Pin WSON EP T/R

OP Amp Dual GP R-R O/P ±3V/6V 8-Pin SOIC Tube

Logic Gates Quadruple 2-Input Pos-NAND Buffer

The TL714CPE4 is a high-speed single voltage comparator from Texas Instruments featuring totem-pole output stage for direct logic interface without external pull-up resistors. It delivers fast response time suitable for precision threshold detection applications and operates over a wide commercial temperature range in an 8-pin DIP package. Well-suited for zero-crossing detection, oscillators, and high-speed signal level conversion in analog-to-digital interface circuits.

The CD74HC174M96 is a hex D-type flip-flop with common reset in the high-speed HC CMOS logic family by Texas Instruments, housed in a 16-pin SOIC package. Key specs: 20 MHz maximum operating frequency, 50 pF load capacitance, 5.2 mA output sink current. Available from stock worldwide with competitive pricing.