Texas Instruments

Differential Amplifiers Full Diff I/O Hi Sl

Use the download button to access the DAC70501ZDGST schematic symbol, PCB footprint, and 3D model.

Touch Screen Controllers Prog 4-Wire w/Ster Codec & Hdph/Spk Amp

Digital to Analog Converters - DAC 8-Bit Micro Power DUAL Digital-to-Analog Converter with Rail-to-Rail Output 10-WSON -40 to 105

Processor Supervisor 1.71V 1 Active Low/Open Drain 5-Pin SOT-23 T/R

Use the download button to access the DAC70501MDGST schematic symbol, PCB footprint, and 3D model.

Switching Voltage Regulators Step-Down Regulator

CD74HC243EE4 is a quad bidirectional bus transceiver IC from Texas Instruments in the HC/UH CMOS family, featuring 4 data channels with 3-state outputs and independent output enable for each direction, operating across a 2 V to 6 V supply with a 50 pF load capacitance. It supports non-inverting bidirectional data transfer in a 14-pin DIP package. Available from stock globally with competitive pricing.

The Texas Instruments TPS3838E18DBVRG4 is a single-channel processor supervisor and voltage monitor IC with a 1.71V threshold. It provides an active-low, open-drain reset output and operates in a compact 5-pin SOT-23 package. RoHS-compliant and ideal for reliable microprocessor reset and power supply supervision.

The UCC3911DPTR-4G4 is a battery management and protection IC from Texas Instruments designed for lithium-ion and lithium-polymer battery packs, operating at a nominal supply voltage of 7.2V in a 16-pin SOP surface-mount package. It provides overvoltage, undervoltage, and overcurrent protection for multi-cell battery systems. Available from stock worldwide at competitive pricing.

Battery Management Family 2-5S Overvoltage Protector with Internal Delay Timer 8-WSON -40 to 85

LED Lighting Drivers

PPS74501PQWDRBRQ1 is an automotive-grade 500 mA adjustable LDO voltage regulator from Texas Instruments with a 1.5 V to 6 V input range and a maximum dropout voltage of 0.91 V. It features high PSRR, low quiescent current, and a power-good output in an 8-pin SON package.

The MSP430P325IPMPX is an ultra-low-power 16-bit microcontroller from Texas Instruments in a QFP package. It features an integrated ADC, timers, and on-chip flash memory suited for metering and sensor applications. Available from stock with worldwide shipping.

Power Switch ICs - Power Distribution 40-V, 50-m , 1-ch automotive smart high-side switch with adjustable current limit 16-HTSSOP -40 to 125

The TPS26631PWPT is a 4.5V to 60V eFuse with integrated MOSFET from Texas Instruments, offering 31mΩ RDS(on), 0.6A–6A adjustable current limit, output power limiting, and surge protection in a 20-HTSSOP package. Ideal for industrial and telecom power management. Available from stock with worldwide shipping.

Voltage References 2.048-V Precision Mcrpwr Shunt .5% acc

Analog to Digital Converters - ADC Automotive quad-channel 12-bit 25-MSPS analog-to-digital converter (ADC) 56-VQFNP -40 to 125

The LP8550TLX-A/NOPB is a high-efficiency 6-channel LED backlight driver IC from Texas Instruments with serial data interface. It features a compact 25-ball BGA package and supports up to 6 LED string segments for display backlight applications. RoHS-compliant and available from stock with worldwide shipping.

Battery Management Family 2-5S Overvoltage Protector with Internal Delay Timer 8-WSON -40 to 85

Counter Shift Registers High Speed CMOS 8-Bit Shift Register

TAS5152DKDG4 is a stereo 125 W per channel digital audio power stage IC with 20 dB gain, 240 W combined output, and 0 V to 37 V supply range in a 36-lead PSOP package, enabling high-power Class D amplifier designs.

CD74AC14M96G4 is a hex Schmitt-trigger inverter IC from Texas Instruments in the AC CMOS logic family. It provides 6 inverting channels with hysteresis, 50 pF load capacitance, and 24 mA output drive in a 14-pin SOIC package. Suitable for noise-immune signal conditioning in industrial and consumer electronics applications.

Use the download button to access the SN74ALS573CNG4 schematic symbol, PCB footprint, and 3D model.

Digital to Analog Converters - DAC 10-bit 1-channel DAC with NVM, buffered voltage output and I2C interface 8-WSON -40 to 125

Operational Amplifiers - Op Amps SpeedPlus(TM) Dual, Wideband, Single-Supply Operational Amplifier 8-SOIC

Texas Instruments THS6222IRHFT is a differential broadband PLC and HPLC line driver with integrated common-mode buffer in 24-VQFN package. Operates from -40°C to 85°C with single-channel architecture. Available from stock with worldwide shipping.

Economy single ended 500KHz current mode PWM controller with 16V/10V UVLO 50% duty cycle, 0-70C

IC OPAMP GP 2 CIRCUIT 8DIP

The MSP430P325AIPG is a 16-bit ultra-low-power microcontroller from Texas Instruments featuring 16 kB OTP flash, 512 B RAM, a 14-bit ADC, and an integrated 84-segment LCD driver for smart meter and display applications. It operates at up to 32 kHz with JTAG boundary scan support and is housed in a 64-pin QFP package. Available from $4.50 in stock with worldwide shipping.

Use the download button to access the DRV8910QPWPRQ1 schematic symbol, PCB footprint, and 3D model.

WiFi Modules (802.11) SimpleLink Wi-Fi CERTIFIED dual-band wireless antenna module solution 63-QFM -40 to 85

The CD74HCT165ME4 is an 8-bit parallel-in serial-out shift register from Texas Instruments in a 16-pin SOIC package. It belongs to the HCT CMOS logic family, supports up to 18 MHz clock frequency, and features SISO operation for versatile serial data conversion. From $0.50 in stock with worldwide shipping.

Programmable mid input voltage range Power Management IC (PMIC) for Apollo Lake processors

Digital Isolators Automotive Grade 0, high-speed, robust-EMC quad-channel digital isolator 16-SOIC -40 to 150

Battery Management 2-Cell Lithium-Ion Protection IC

4-Channel Quad ADC Pipelined 25Msps 12-bit Serial Automotive 56-Pin VQFNP EP T/R

The TIBPAL22V10AMJTB is a high-performance PAL-type programmable logic device by Texas Instruments featuring 22 inputs, 10 I/O lines, 132 product terms, and a 22 MHz maximum clock in a 24-pin ceramic DIP package. It implements complex combinatorial and registered logic functions for glue logic and state machine designs. Available from stock with worldwide shipping.

The UCC3911DP-4G4 is a 2-cell lithium-ion battery protection IC from Texas Instruments, featuring dual-channel monitoring with fixed thresholds for overcharge, overdischarge, and overcurrent protection in a 16-pin SOP package. Designed for portable electronics requiring reliable battery safety management. Available from stock with worldwide shipping.

Buffers & Line Drivers Octal Buffer/Driver With 3-State Outputs

LCD Gamma Buffers Ref Vltg Gen for VCOM Adj

CD74ACT175EE4 is a quad D-type flip-flop IC from Texas Instruments in the ACT logic family with a maximum operating frequency of 144MHz and 4-bit parallel storage. It operates from a 5V supply with TTL-compatible inputs in a 16-pin DIP package. Available from stock worldwide with competitive pricing.

Texas Instruments CD74AC32EE4 is a quad 2-input OR gate IC in a 14-pin PDIP through-hole package using advanced CMOS AC logic technology. It provides 4 independent OR gate functions with 24 mA output drive and 50 pF load capacitance rating. Available from stock with worldwide shipping.

LCD Gamma Buffers ReferenceVltgGnrtr VCOMADJment

Use the download button to access the TS3A24157RSER schematic symbol, PCB footprint, and 3D model.

The UCC3911DPTR-4 is a dual-channel battery protector IC from Texas Instruments, designed to monitor and protect lithium-ion battery packs against overcharge, overdischarge, and overcurrent conditions in a 16-pin SOP package. Ideal for portable electronics power management. Available from stock with worldwide shipping.

PCI Interface IC 32B 33 MHz PCI-to- PCI Bridge

Operational Amplifiers - Op Amps JFET-INPUT OPERATIONAL AMPLIFIER

The UCC3911DPTR-1 is a dual-channel battery protection IC from Texas Instruments designed to monitor and protect lithium-ion battery packs in a 16-pin SOP package. It provides overvoltage, undervoltage, and overcurrent protection for 2-cell series battery configurations. Available from stock worldwide with competitive pricing for portable electronics and energy storage applications.

Battery Management Standalone 1-cell 3.0-A buck battery charger with power path and 1.2-A boost operation 24-WQFN -40 to 85