CD74AC32EE4 Texas Instruments Integrated Circuit (Dual-In-Line Packages) In Stock

Texas Instruments CD74AC32EE4 is a quad 2-input OR gate IC in a 14-pin PDIP through-hole package using advanced CMOS AC logic technology. It provides 4 independent OR gate functions with 24 mA output drive and 50 pF load capacitance rating. Available from stock with worldwide shipping.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
CD74AC32EE4Dual-In-Line Packages
Quick Facts
Manufacturer
Texas Instruments
Package
Dual-In-Line Packages
Pin Count
14
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $0.5630(MOQ 1000)
Temp Range
-55.0°C to 125.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • 4 independent 2-input OR gates in a single 14-pin PDIP package for dense combinational logic implementations
  • AC CMOS family delivers faster switching speeds than standard HC logic while maintaining low power consumption
  • 24 mA maximum output low current (I_OL) enables direct driving of multiple CMOS and TTL-compatible inputs
  • 50 pF load capacitance rating supports typical PCB trace and fan-out loads without propagation delay derating
  • RoHS-compliant lead-free 14-pin PDIP package ideal for through-hole prototyping and legacy board repair

Applications

The CD74AC32EE4 is used in combinational logic circuits requiring OR operations, including signal multiplexing, interrupt aggregation, and enable-logic networks in microcontroller and FPGA peripheral designs. Its 24 mA output drive and AC-family speed make it suitable for bus interface logic and clock-enable circuits that need to drive multiple downstream inputs reliably. The 14-pin PDIP package supports rapid prototyping on breadboards and repair of older through-hole PCB assemblies.

Specifications

Pbfree CodeYes
YTEOL15
FamilyAC
JESD-30 CodeR-PDIP-T14
JESD-609 Codee4
Load Capacitance (CL)50pF
Logic IC TypeOR GATE
Max I(ol)0.024A
Number of Functions4
Number of Inputs2
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeDIP14,.3
Package ShapeRECTANGULAR
Package StyleIN-LINE
Packing MethodTUBE
Power Supply Current-Max (ICC)0.08mA
Prop. Delay@Nom-Sup13.3ns
Propagation Delay (tpd)119ns
Qualification StatusNot Qualified
Schmitt TriggerNO
Supply Voltage-Max (Vsup)5.5V
Supply Voltage-Min (Vsup)1.5V
Supply Voltage-Nom (Vsup)5V
Surface MountNO
TechnologyCMOS
Temperature GradeMILITARY
Terminal FinishNickel/Palladium/Gold (Ni/Pd/Au)
Terminal FormTHROUGH-HOLE
Terminal Pitch2.54mm
Terminal PositionDUAL
PackageDual-In-Line Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
HTS Code8542.39.00.60
Country of OriginMalaysia, Mexico

Datasheet

CD74AC32EE4 Datasheet Download

Official datasheet from Texas Instruments

Alternate & Equivalent Parts

Compatible alternatives and drop-in replacements for CD74AC32EE4:

CD74AC32E

General Electric Solid State Gate

View Part →

Frequently Asked Questions

How does the AC family speed of CD74AC32EE4 compare to HC-family OR gates in time-critical logic paths?

The CD74AC32EE4 belongs to the AC (Advanced CMOS) logic family, which typically offers propagation delays of 5 ns to 8 ns at 5 V supply, roughly 2 to 3 times faster than the equivalent HC-family part at the same voltage. This speed advantage matters in clock distribution, interrupt aggregation, and bus arbitration circuits where tight setup and hold margins must be maintained.

Can the CD74AC32EE4 drive multiple CMOS inputs directly from a single output?

Yes, the CD74AC32EE4 output can source or sink up to 24 mA, which is substantially higher than the 4 mA to 8 mA of standard HC-family outputs. This allows a single CD74AC32EE4 output to directly drive 4 to 8 CMOS gate inputs in parallel while remaining within the 50 pF load capacitance rating for full-speed operation.

For a breadboard prototype that requires an OR gate at 3.3 V logic levels, is CD74AC32EE4 compatible?

The CD74AC32EE4 is specified to operate over a supply range of 1.5 V to 5.5 V, so it can run at 3.3 V and accept logic-HIGH inputs from 3.3 V microcontroller or FPGA GPIO pins. However, input-level thresholds shift with supply voltage, so designers should verify that the 3.3 V HIGH level exceeds the VIH threshold at that supply for reliable switching.

When should a designer choose the through-hole CD74AC32EE4 over a surface-mount AC-family OR gate?

The CD74AC32EE4 in a 14-pin PDIP through-hole package is the preferred choice for breadboard prototyping, university lab experiments, and through-hole PCB designs where hand-soldering or socketed DIP placement is required. Surface-mount versions in SOIC-14 or TSSOP-14 offer a smaller footprint for high-volume production boards but cannot be inserted into standard 0.1-inch pitch breadboard sockets.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Texas Instruments

Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.

AvailabilityIn Stock
Reference Price (USD)
From $0.5630
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1000+$0.6040$604.00
3000+$0.5770$1731.00
5000+$0.5630$2815.00
pcs
Unit price: $0.6040 · Total: $604.00

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.

SK
Sarah Kim
VP Engineering, NovaBit Electronics, South Korea