Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
41,509
Total Products
126
Categories
All Texas Instruments Components
Showing 9,101–9,150 of 41,509
IC AMP CLASS AB STEREO 14SOIC
Clock Drivers & Distribution 3.3V PLL Clock Drvr
Voltage References Lo-Vtg Adj Precision Shunt Regulator
SN74LVC863ANSRE4 is a 9-bit bidirectional bus transceiver from Texas Instruments in the LVC logic family with 3-state outputs and dual independent output enables. Supports 24 mA output sink current and independent control for each data direction in a 24-pin SOIC package. Available in stock worldwide with fast shipping.
The LM3704XBBP-232 is a single-channel voltage supervisor and reset IC from Texas Instruments, featuring manual reset input, power-fail input monitoring, and fixed threshold detection in a compact 9-ball BGA package.
Battery Management Complete Battery Fuel Gauge
LDO Voltage Regulators
UC3874N-2G4 is a high-efficiency synchronous step-down buck switching controller by Texas Instruments in an 18-pin DIP package. Key specs: current-mode PWM control, 12V to 36V input voltage range, and synchronous rectification for maximum efficiency. Available in stock with worldwide shipping.
Analog to Digital Converters - ADC 12-Bit 10us Serial CMOS Sampling
Modulator/Demodulator 1.7-6.0GHz Wide BW Dir Down Conv Rcvr
Battery Management Complete Battery Fuel Gauge
Battery Management Complete Battery Fuel Gauge
Analog to Digital Converters - ADC 12-Bit 10us Serial CMOS Sampling
The SN74BCT25244NSRE4 is an octal bus driver from Texas Instruments BCT family with 25-ohm incident wave switching for controlled impedance backplane drive. It supports unidirectional buffering with active-low output enable and 188 mA sink current capacity. Offered in a green, lead-free 24-pin SOP package for high-speed digital bus applications.
The SN74BCT25244NSRG4 is a 24-pin octal bus driver from Texas Instruments BCT family featuring 25-ohm incident wave switching for controlled impedance drive. It provides unidirectional buffering with active-low output enable and 188 mA sink current. Packaged in a 24-pin SOP for high-speed backplane bus driving applications.
Texas Instruments SN74BCT25244NSR is an octal bus driver and line driver featuring 25-ohm series resistors for incident wave switching and 3-state outputs. Supports unidirectional data flow with active-low enable control, 50 pF load capacitance, and 188 mA output current. Available in SOIC-24 package with RoHS-compliant lead-free construction, in stock worldwide with competitive pricing.
Audio DSPs Dig Audio SoC for multi-channel app
TPS2346PWG4 is a 4-channel optical network hot-swap controller from Texas Instruments in a 24-pin TSSOP package. It manages power sequencing and inrush current control for four independent channels to enable live board insertion without system disruption. Operates 0°C to 70°C; available from stock worldwide.
Analog to Digital Converters - ADC 11B 200 MSPS ADC
Counter ICs Hi-Sp CMOS 4-Bit Binary w/Sync Reset
16-bit Microcontrollers - MCU Mixed Signal MCU
Operational Amplifiers - Op Amps Low-Noise,High-Prec JFET-Input Op Amp
Texas Instruments SN74BCT2241DWRE4 is an octal buffer and line driver with 3-state outputs in the BCT logic family. It features 33-ohm series output resistors and a 50pF load capacitance rating for bus signal integrity. Packaged in a 20-pin SOIC with dual enable controls for unidirectional bus driving.
VQFN-48
ADS5203IPFBRG4 is a dual-channel 10-bit analog-to-digital converter by Texas Instruments with ±1 V analog input range. Key specs: 2 analog input channels, 10-bit resolution, 0.1465% max linearity error in a 48-pin TQFP package. Available in stock with worldwide shipping.
Microprocessors - MPU ARM MicroProc
Texas Instruments TRSF3238ECDWG4 is a multi-channel RS-232 line driver and receiver supporting 3 V to 5.5 V supply with 5 drivers and Schmitt-trigger inputs in a 28-pin SOIC package. It complies with EIA/TIA-232-F and V.28 standards for reliable serial communication. Available worldwide with competitive pricing and fast shipping.
The SN74BCT2241DWR is an octal buffer and line driver with 3-state outputs from Texas Instruments' BCT logic family, featuring integrated 33 Ω series output resistors to dampen bus reflections. It operates at 5 V with enable-low and enable-high control inputs in a 20-pin SOIC package for high-drive bus applications.
Texas Instruments TL16PC564BLVIPZG4 is a UART interface IC with a 16-bit bus transceiver, 3-state outputs, 10-bit address bus, and PCMCIA bus compatibility, operating at 60 MHz max clock from 3V or 5V supply in a QFP package.
The ADS7825PBG4 is a 16-bit 4-channel successive approximation CMOS ADC with a ±10 V analog input range and 20 µs conversion time. It achieves exceptional 0.0031% linearity error in a 28-pin DIP package. Available from Texas Instruments with worldwide in-stock shipping.
16-bit Microcontrollers - MCU Ultra low power MCU
The UCC3888NG4 is a voltage-mode switching controller IC by Texas Instruments housed in an 8-pin PDIP package. Key specs: 6.6 V to 9 V input range, 5 V nominal output, 200 mA maximum output current. Available from stock worldwide with competitive pricing.
The SN74BCT2241DWG4 is an octal buffer and line driver in a 20-pin SOIC package with 33-ohm series output resistors and dual active-high/active-low enable controls. Part of the BCT logic family operating at 5V, it supports 50pF load capacitance and unidirectional signal flow, making it ideal for bus isolation, backplane driving, and board-to-board signal buffering.
Bus Transceivers 16-Bit Bus Trcvr/Reg W/3-St Otpt
Bus Transceivers 16-Bit Bus Trcvr/Reg W/3-St Otpt
UART Interface IC PCM Universal Async Rcvr Transmitter
Supervisory Circuits Triple Processor Supervisory Circuits
Texas Instruments SN74BCT2241DWE4 is an octal buffer and line driver with 3-state outputs, integrated 33 ohm output series resistors, dual enable controls, and 50 pF load capacity in a 20-pin SOIC package. Available from stock with worldwide shipping.
16-bit Microcontrollers - MCU Mixed Signal MCU
The SN74BCT2241DWRG4 is an octal buffer and line driver with 3-state outputs, featuring 33-ohm output series resistors for signal integrity, active-high and active-low output enable controls, and BCT-family BiCMOS technology for high-speed MOS-compatible bus driving. Supports 50 pF load capacitance with 12 mA output sink current. Available from authorized distributors with worldwide shipping.
Voltage References Precision Micropower Shunt Voltage Reference 5-SC70 -40 to 85
Buffers & Line Drivers 2.5V/3.3V 16B Buffers/Drivers
The Texas Instruments TLC34058-110FN is a specialized 256x24 color palette RAMDAC integrated circuit supporting up to 1280x1024 pixel display resolution at 110MHz maximum clock frequency in an 84-pin PLCC package. It interfaces via an 8-bit external data bus with a 2-bit address bus. Available from stock with worldwide shipping.
LDO Voltage Regulators
Operational Amplifiers - Op Amps CMOS Quad Op Amp
Texas Instruments DAC7664YCRG4 is a 16-bit quad-channel parallel-input digital-to-analog converter with ±2.5 V output range. It offers a maximum linearity error of 0.0046 % and accepts parallel word-format binary input, operating from ±5 V supplies. Supplied in a 64-pin LQFP RoHS-compliant package with worldwide shipping.
Flip-Flops Octal D-Ty Edge-Trig F-F W/3-State Otpt
Voltage References 2.5V Prec Micropwr Shunt Vltg Ref
Flip Flop 2 Element JK Type 1 Bit Positive Edge 16-SOIC (0.154", 3.90mm Width)
16-bit Microcontrollers - MCU Ultra low power MCU
Need Texas Instruments Components?
Get competitive quotes from authorized China distributors
Request a Quote