Texas Instruments

LDO Voltage Regulators 500-mA, low-IQ, high-PSRR, dual-channel low-dropout (LDO) voltage regulator 10-WSON -40 to 125

PLASTIC, SO-16

Operational Amplifiers - Op Amps Dual Lo Noise R To R Op Amp

Supervisory Circuits Low-power 3-pin voltage supervisor (reset IC) with active-low, push-pull reset 3-SC70 -40 to 125

Buffers & Line Drivers Single Bus Buffer Gate

SOP-16

The SN74ALS623ADWRE4 is an octal bidirectional bus transceiver from Texas Instruments in the ALS logic family. It features independent output enable control for each direction and supports 50 pF load capacitance in a 20-pin SOIC package. Available from stock worldwide for reliable data bus interface applications.

The SN74CBT6800ADGVRG4 is a 10-bit TTL-compatible bus switch from Texas Instruments with active-low output enable, housed in a 24-pin TVSOP package for high-density designs. It provides near-zero propagation delay switching ideal for live bus switching in high-speed digital systems. Available in stock with worldwide distribution for data routing and bus management applications.

Supervisory Circuits w/Prog Watchdog Window

Supervisory Circuits Low-power 3-pin voltage supervisor (reset IC) with active-high push-pull reset 3-SOT-23 -40 to 125

Texas Instruments PREF4132B40DBVRQ1 is an automotive-grade, 12 ppm/°C low-noise precision voltage reference with a 4.096 V nominal output in a 5-pin SOT-23 package. It delivers output accuracy within ±2 mV (4.093952 V to 4.098048 V) and up to 10 mA output current for precision ADC and DAC reference supply in automotive designs. Available worldwide for AEC-Q100 compliant automotive instrumentation and sensor applications.

Texas Instruments CD74ACT245MG4 is an octal bidirectional bus transceiver with 3-state outputs in a 20-pin SOIC package. It features direction-control and output-enable inputs and drives 50 pF loads with ACT-family speed and noise immunity. Designed for high-speed 5 V logic bus buffering and level interfacing.

Operational Amplifiers - Op Amps Auto Cat 2.7V Hi-Sle Rate Rail to Rail

Logic Gates Lo PWR Config Multi Funct Gate

Operational Amplifiers - Op Amps Auto Cat 2.7V Hi-Sle Rate Rail to Rail

Clock Drivers & Distribution 1.8v PLL Clock Driver

Power Switch ICs - Power Distribution .345A 2.7-5.5V Hi

Use the download button to access the TPS2045DR schematic symbol, PCB footprint, and 3D model.

Analog to Digital Converters - ADC Dual 11B 200MSPS ADC

The CDC5806PWG4 is a PLL-based clock generator providing 6 simultaneous output clocks in a 20-pin TSSOP package. It distributes a single reference clock to six identical outputs with low skew for synchronous digital systems. Available in stock worldwide with RoHS-compliant lead-free packaging.

The CDC5806PWRG4 is a PLL-based clock generator and driver from Texas Instruments that provides six buffered clock outputs for system clock distribution. Part of the 5806 family, it operates as a single-function clock driver housed in a 20-pin Small Outline Package. Available from stock with worldwide shipping.

Current & Power Monitors & Regulators CRNT SHUNT MONITOR

LDO Voltage Regulators Fast-Tran-Res 500-mA

Translation - Voltage Levels 2-bit 0.65V to 3.6V AXC dual-supply bus transciever with bus-hold 8-VSSOP -40 to 125

Use the download button to access the DAC43401DSGT schematic symbol, PCB footprint, and 3D model.

The 74ALVCHR16269AVRE4 is a 12-bit to 24-bit registered bus exchanger from Texas Instruments in the ALVC logic family. It supports bidirectional data exchange with active-low enable control and operates from 1.65 V to 3.3 V supply at 50 pF load. Packaged in a 56-pin SSOP for high-density data bus designs.

Battery Management Li-ion batt Charger

Texas Instruments TCM320AC39CDW is a voice-band audio processor DSP IC designed for telephone and voice communication applications, featuring voice-band signal processing in a 20-pin SOIC package. Integrates codec-compatible audio processing functions for POTS and consumer voice hardware. Available from distributors worldwide for legacy voice hardware repair and new consumer telephony designs.

The UCC3911DPTR-3G4 is a lithium-ion battery protection IC from Texas Instruments designed for single-cell and multi-cell battery pack management. It features a 7.2V nominal supply voltage and provides overvoltage, undervoltage, and overcurrent protection, housed in a 16-pin SOP surface-mount package. Available in stock worldwide with fast shipping.

Buck Switching Regulator IC Positive Adjustable 0.765V 1 Output 300mA SOT-23-6 Thin, TSOT-23-6DC-DC Converters SOT-23-6 RoHS

TEXAS INSTRUMENTS - UCC3581N. - IC, MCPWR VOLTAGE MODE PWM 14-DIP

Use the download button to access the TLV9301IDBVR schematic symbol, PCB footprint, and 3D model.

Switching Voltage Regulators

Battery Management 2-Cell Lithium-Ion Batt Protection IC

The LMF380CIN is a switched capacitor active filter IC from Texas Instruments in a 16-pin DIP package. It supports center/cutoff frequencies from 0.000125 kHz to 25 kHz with dual supply voltages from -2 V to -7.5 V. Available from stock with worldwide shipping.

Operational Amplifiers - Op Amps 0.05uV/dgC Sngl-Sply CMOS 0-Drift Series

Analog Comparators Quad Differential Comparator

Power Factor Correction - PFC High Power-Factor Preregulator

Switching Controllers Current-Mode PWM Controller

Analog Comparators Dual commercial grade standard comparator

SN74ABT8543DWRE4 is an octal registered bus transceiver with boundary scan from Texas Instruments in the ABT logic family. It features independent output enable for each direction and supports bidirectional data transfer in a 28-Pin SOIC package. Available from stock with worldwide shipping.

Flip-Flops Schmitt-trigger input dual D-type positive-edge-triggered flip-flops w/ clear and preset 14-SOIC -40 to 125

Use the download button to access the LM5181QNGURQ1 schematic symbol, PCB footprint, and 3D model.

Texas Instruments LMF40CIN-50 is a switched-capacitor active filter IC with a center frequency range up to 40 kHz, operating from a dual supply of ±2 V to ±7 V, designed for precision signal filtering in audio and industrial analog signal processing applications.

Texas Instruments POPA991IDBVR is an automotive-grade single operational amplifier with 40 V supply, 4.5 MHz bandwidth, and 21 V/µs slew rate. It features rail-to-rail input/output, 665 µV maximum offset voltage, and 110 dB minimum CMRR in a SOT-23 5-pin package. Low supply current of 0.685 mA maximum suits always-on automotive sensor nodes.

Battery Management Family 2-5S Overvoltage Protector with Internal Delay Timer 8-WSON -40 to 85

The ADS8675 is a 18-bit, 1MSPS successive approximation register (SAR) analog-to-digital converter from Texas Instruments with a fully differential input range. It features an integrated reference, SPI-compatible serial interface, and wide input voltage range operation in a compact SSOP-28 package. Suitable for precision data acquisition, industrial measurement, and instrumentation applications requiring high resolution and throughput.

Battery Management Family 2-5S Overvoltage Protector with Internal Delay Timer 8-WSON -40 to 85

LMF380CIN/NOPB is a Texas Instruments switched-capacitor active filter IC providing precision 5th-order elliptic low-pass filtering with a clock-tunable cutoff frequency, housed in a dual-in-line DIP package for easy prototyping and evaluation.

Use the download button to access the CDC319DBR schematic symbol, PCB footprint, and 3D model.