Texas Instruments

TEXAS INSTRUMENTS - LMH6553SDE - DIFF AMP, 900MHZ, 8LLP, POWERWISE

Supervisory Circuits Current/Supply-Volt Supervisory

Operational Amplifiers - Op Amps Single MicroPwr RRIO

DIP-20

Analog to Digital Converters - ADC 12Bit 66kSPS Ser Out Prog MSB/LSB First

Analog to Digital Converters - ADC 12Bit 66kSPS Ser Out Prog MSB/LSB First

14MHz, MUX-friendly, low-noise, zero-drift, RRO, CMOS precision operational amplifier

Switching Controllers Low Power Economy BiCMOS Current Mode

Latches 16B Transparent D-Type

RS-232 Interface IC 3 to 5.5V Multichan RS-232 Line Drv/Rec

Texas Instruments MAX208CDBRG4 is a 5V multi-channel RS-232 line driver and receiver IC in SOIC-24 package. Features 4 drivers and 4 receivers with Schmitt trigger inputs compliant with EIA-232-F/TIA-232-F/V.28 standards. Available from stock worldwide with competitive pricing and fast shipping.

RS-232 Interface IC 3V-5.5V Multch RS232 Comp Line Drvr/Rcvr

RS-232 Interface IC 3V-5.5V Multch RS232 Comp Line Drvr/Rcvr

Switching Controllers Low Power Economy BiCMOS Current Mode

High Speed Operational Amplifiers 175-MHz Low-Power Vltg-Feedback Dual

Adjustable precision shunt regulator

The UC1843AJ is a current-mode PWM controller from Texas Instruments designed for off-line and DC-DC switching power supply applications, featuring an 8.2–25 V input voltage range in a ceramic DIP-8 package. It integrates a precision reference, oscillator, and cycle-by-cycle current limiting for robust power conversion. Available from stock with worldwide shipping.

Octal-ChannelBuffer & Line Driver, 3-State, 20-Pin SOP

LVDS Driver 630Mbps 0.454V 38-Pin TSSOP T/R

The UC1843AJ883B is a current-mode PWM controller IC operating at up to 500 kHz with 8.2 V to 25 V input voltage range and 1 A output in an 8-pin ceramic DIP package. It supports pulse width modulation control for high-efficiency switching power supplies. Available from Texas Instruments with worldwide shipping.

Use the download button to access the TUSB1044RNQR schematic symbol, PCB footprint, and 3D model.

RS-232 Transceiver With Split Supply Pin for Logic Side

Analog to Digital Converters - ADC Quad-Channel, 14-Bit, 25-MSPS Analog-to-Digital Converter (ADC) 56-QFN -40 to 85

Display Interface IC DisplayPort to TMDS Translator

Differential Amplifiers Wideband Low-Dist Fully Differential

Precision Amplifiers Enhanced-JFET Precision Quad

MCU 16-bit MSP430 MSP430 RISC 256KB Flash 2.5V/3.3V 100-Pin LQFP Tray

Decoder/Demultiplexer Single 3-to-8 16-Pin SOP T/R

Power Switch ICs - Power Distribution 0.7A 2.7-5.5V Quad Hi-Side MOSFET

MCU 32-bit Tiva C ARM Cortex M4F RISC 128KB Flash 1.2V/3.3V 64-Pin LQFP T/R

Shift Register Single 8-Bit Serial to Serial/Parallel 16-Pin SOIC T/R

Supervisory Circuits Processor with Power-Fail

Automotive 24-bit, 40-kSPS, 10-ch, delta-sigma ADC with PGA, VREF, IDACs and AC excitation

Logic Gates Hi-Sp CMOS Quad 2-In Exclusive-OR Gates

Precision, 10-MHz, low-noise, low-power, RRIO, CMOS zero-crossover operational amplifier

WSON-10

Operational Amplifiers - Op Amps Dual Adv LinCMOS Rail-to-Rail

Operational Amplifiers - Op Amps Dual Adv LinCMOS Rail-to-Rail

RS-422/RS-485 Interface IC 3.3-V to 5-V RS-485 transceiver with 18-kV IEC ESD protection 8-SOIC -40 to 125

Texas Instruments XRM48L950PGET, 16 bit, 32 bit ARM Cortex R4F Microcontroller, 200MHz, 3 MB Flash, 144-Pin LQFP

The UCC38501NG4 is a power factor correction and PWM controller IC from Texas Instruments, operating on a 10.3V to 15V supply at up to 115 kHz. It features current-mode control with programmable options for voltage and current mode operation, housed in a 20-pin PDIP package. Available in stock worldwide with fast shipping.

The UCC38051DG4 is a current-mode power factor correction and PWM controller IC from Texas Instruments. It operates from 10V to 18V input and switches at up to 200kHz, housed in an 8-pin SOIC package. Lead-free and RoHS-compliant, it is stocked globally for power supply design applications.

Texas Instruments UCC3813PW-4G4, PWM Current Mode Controller, 1 A, 1000 kHz 8-Pin TSSOP

The UCC38502NG4 is a Power Factor Controller with Post Regulator IC from Texas Instruments, supporting current-mode PWM control at up to 115 kHz with an 18 V maximum supply and a 20-pin PDIP through-hole package. Available from authorized global distributors with competitive pricing and fast worldwide shipping.

The UCC38086PG4 is a current-mode PWM controller IC with dual 1 A gate drive outputs and up to 1000 kHz switching frequency in an 8-pin PDIP package. It operates from 4.3 V minimum input and supports flexible power supply topologies. Available from stock worldwide with competitive pricing.

Texas Instruments TPS79418DCQ, LDO Voltage Regulator, 250mA, 1.8 V, ±3% 6-Pin, SOT-223

Texas Instruments UCC2804PW, PWM Current Mode Controller, 1 A, 1000 kHz 8-Pin TSSOP

Texas Instruments UCC27526DSDT Dual MOSFET Power Driver, 5A 8-Pin, SON

The UC3909DWG4 is a lead-acid battery charge controller IC from Texas Instruments, featuring current-mode PWM control with an input voltage range of 8.8V to 35V. It provides up to 4.5mA output in a 20-pin SOIC package, ideal for precision battery management. Available from stock worldwide with fast shipping.

Texas Instruments UC2825QG3, PWM Current Mode Controller, Dual 1.5 A, 1000 kHz 20-Pin PLCC