Texas Instruments

The UCC25705DG4 is a voltage-mode PWM controller IC from Texas Instruments, featuring up to 4000kHz switching frequency, 20mA drive capability, and an input voltage range of 9V to 15V. Housed in an 8-pin SOIC surface-mount package, it enables precise pulse-width modulation control for compact switching power supply designs. Available from authorized distributors with worldwide shipping.

Texas Instruments UCC2580N-4G4, Dual PWM Voltage Mode Controller, 1 A, 430 kHz 16-Pin, PDIP

Texas Instruments TLC7701QDG4 is a single-channel voltage supervisor and reset IC with adjustable threshold up to 1.16 V. It provides accurate supply monitoring with reset signal generation and features SOIC-8 packaging. Competitively priced and available in stock with worldwide shipping.

Texas Instruments UCC2580N-2, Dual PWM Voltage Mode Controller, 1 A, 430 kHz 16-Pin, PDIP

Texas Instruments TPS61010DGSG4, Boost Converter, Step Up Adjustable, 780 kHz 10-Pin, MSOP

The TPS2057ADG4 is a hex power distribution switch from Texas Instruments, featuring three high-side channels with 80mΩ on-resistance and 2.7V minimum operating voltage. It integrates fault reporting and current limiting in a 16-pin SOIC package. Available from stock with competitive pricing and worldwide shipping.

Texas Instruments TPS2398DGKG4, 1-Channel, Hot Swap Controller, Negative Voltage, -48 V 8-Pin, MSOP

Texas Instruments UCC2580D-2G4 is a dual voltage-mode PWM controller operating up to 430kHz with 1A gate drive output in a 16-pin SOIC package. Supports 10V to 14V input range for push-pull and half-bridge topologies. RoHS compliant, in stock worldwide shipping.

The TLC354CPWG4 is a quad comparator from Texas Instruments with open-drain outputs and 0.65 µs response time supporting 3 V to 15 V supply range in a 14-pin TSSOP package. It features ultra-low 0.6 nA input bias current and four independent comparator channels. Available from stock with competitive pricing and worldwide shipping.

UC39431DG4 is an adjustable three-terminal series voltage reference by Texas Instruments covering 2.4V to 36V output range with 0.4% accuracy. Key specs: 50 mA max output current, programmable to standard voltages, 8-pin SOIC package. Available from stock with worldwide shipping.

Texas Instruments UC3841DWG4 is a PWM current-mode controller delivering up to 1 A output with switching frequency up to 500 kHz. Operating from 8 V to 30 V input, it supports pulse width modulation and current-mode control for efficient power supply designs. Available in 18-Pin SOIC package from Texas Instruments, in stock with worldwide shipping.

The TPS75415QPWPG4 is a fixed 1.5V LDO voltage regulator from Texas Instruments delivering up to 2A output current in a 20-pin HTSSOP package. It operates from 2.7V to 5.5V input with exceptional line regulation of 0.00345% and load regulation of 0.001%. Available in stock with worldwide shipping from authorized distributors.

The UC39432NG4 is a precision analog controller and feedback signal generator from Texas Instruments. It features a 1.3V internal reference, supports up to 36V supply voltage, and operates as a single-channel precision analog circuit. Available in 8-pin PDIP package, from $2.50 in stock with worldwide shipping.

Texas Instruments TLC2652C-8DG4 is a chopper-stabilized precision operational amplifier with an ultra-low input offset voltage of 4.35µV maximum and 1.9MHz bandwidth. It features 120dB minimum CMRR, 0.0001µA bias current, and supports supply voltages from 5V to 15V in an 8-pin SOIC package. Available from stock with worldwide shipping.

The UC3872MG4 is a fluorescent lamp controller and driver IC from Texas Instruments, featuring current-mode resonant control with input voltage range of 4.5V to 24V across 5V, 9V, 12V, 15V, and 18V nominal levels. It supports efficient CCFL and fluorescent lamp dimming in a compact 16-pin QSOP package. Available in RoHS-compliant lead-free packaging, in stock worldwide with fast global shipping.

Texas Instruments UCC25702PWG4, PWM Voltage Mode Controller, 1 A, 700 kHz 14-Pin, TSSOP

The UC3832NG4 is a low dropout voltage regulator from Texas Instruments with adjustable output up to 0.4A, supporting input voltages from 4.5V to 36V with a 2V reference. Packaged in a 14-Pin PDIP, it features under and over-voltage fault alert with programmable delay. Available from stock worldwide with competitive pricing.

The TPS76425DBVRG4 is a fixed 2.5V LDO voltage regulator from Texas Instruments delivering 150mA output in a compact 5-pin SOT-23 package. Accepts 2.7V to 10V input with dropout voltage as low as 0.36V nominal. Available from stock with worldwide shipping.

UC2874N-1G4, DC-DC Controller Dual, 36V Step-Down, 18-Pin, PDIP

The Texas Instruments UC37133DG4 is a 1-channel intelligent power switch in an 8-pin SOIC package. It features built-in overcurrent and transient protection with up to 0.4A source output current. Available from stock worldwide with competitive pricing.

The UC3578NG4 is a voltage-mode PWM DC-DC switching controller from Texas Instruments, supporting an input voltage range of 11V to 72V in a 16-pin PDIP package. It provides pulse-width modulation control for designing reliable buck, boost, and flyback converters in power supply applications. In-stock worldwide with competitive pricing for engineering evaluation and volume production.

The UC2872NG4 is a fluorescent lamp controller and driver IC from Texas Instruments using current-mode PWM control. It operates over an input voltage range of 4.5 V to 24 V and supports resonant control techniques in a 14-pin PDIP package. Available from stock worldwide with fast shipping.

The UC2871NG4 is a current-mode resonant fluorescent lamp controller and driver IC from Texas Instruments with a 4.5 V to 20 V input range and multi-voltage support at 5 V, 9 V, 12 V, 15 V, and 18 V. It integrates resonant control for efficient lamp regulation in compact CCFL ballast designs. Available in an 18-pin PDIP package, RoHS-compliant and lead-free.

The UC2866NG4 is a voltage-mode resonant PWM controller from Texas Instruments supporting dual full and half-bridge topologies with 500mA drive and 550kHz operation. It accepts 11.5V to 20V input and is housed in a 16-pin PDIP package. Available from stock with worldwide shipping.

The UC2848DWG4 is a current-mode PWM switching controller from Texas Instruments with up to 1000 kHz switching frequency and 2 A gate drive capability. It operates from an 11 V to 20 V input supply and is housed in a 16-pin SOIC package for compact power supply designs. Available with worldwide shipping.

UC2861Q, PWM Voltage Mode Controller, Dual Full/Half-Bridge, Resonant, 500mA 550kHz, 20-Pin PLCC

Texas Instruments UC2854ANG4, Power Factor Pre-Regulator Circuit, 115 kHz, 20 V 16-Pin, PDIP

TPS3610T50PWG4, Processor Supervisor 1.8, 5V Active Low, Reset 14-Pin TSSOP

UC2714NG4, Dual MOSFET Power Driver 2A, 7 to 20V, 8-Pin PDIP

The UC2527ANG4 is a Dual PWM Voltage-Mode Controller IC from Texas Instruments, offering up to 400mA output drive, 400kHz switching frequency, and 8V to 35V input range in a 16-pin PDIP package for versatile power supply design. From $2.50 in stock with worldwide shipping.

The UC2709NG4 is a dual MOSFET power gate driver capable of sourcing and sinking up to 1.5 A peak output current per channel for fast switching. It supports a wide 5 V to 40 V supply range with totem-pole outputs and inverting logic. Available in an 8-pin PDIP package, ideal for high-frequency power conversion designs.

The TVP7001 is a 10-bit serial ADC from Texas Instruments with differential input capability in a 100-pin HTQFP package. It delivers high-speed analog-to-digital conversion with differential input pairs for excellent noise rejection. Ideal for video and imaging data acquisition systems requiring precision 10-bit resolution at fast sample rates.

LCC-20

Texas Instruments TSB41BA3BPFPG4, Cable Transceiver, 6-TRX 400MBps Differential, 80-Pin HTQFP

The TPS79516DCQG4 is a fixed 1.6 V, 500 mA low-dropout linear voltage regulator from Texas Instruments with a 2.7 V to 5.5 V input range and ±2% accuracy in a 6-pin SOT-223 package. It features ultra-low dropout voltage of 1 V maximum, ensuring stable regulation even with small input-output voltage differentials. Available from stock worldwide at competitive prices for portable and battery-powered applications.

The TS12A4515DG4 is a single-channel SPST analog switch from Texas Instruments designed for 3V, 5V, 9V, and 12V systems. It features a normally-closed (NC) configuration with typical on-resistance under 0.5 Ohm and operates with input voltages from -4.5V to +5.5V. Packaged in an 8-pin SOIC for signal routing in audio, industrial, and instrumentation applications.

Texas Instruments TPS77925DGKG4, LDO Voltage Regulator, 250mA, 2.5 V, ±2% 8-Pin, MSOP

TPS77718DG4 is a fixed 1.8 V low-dropout linear voltage regulator from Texas Instruments, delivering 750 mA output current with a 427 mV maximum dropout voltage and ±2% output accuracy. It accepts an input voltage from 2.7 V to 10 V and provides excellent line regulation of 0.001314% for sensitive analog and digital loads. Packaged in an 8-pin SOIC, it is used in portable electronics, DSP cores, and microcontroller power rails.

TPS77825DG4, Low Dropout Voltage Regulator, 0.75A, 2.5V ±2%, 2.7 to 10Vin, 0.904W, 8-Pin SOIC

TPS79228DBVTG4, Low Dropout Voltage Regulator, 0.1A, 2.8V ±2%, 2.7 to 5.5Vin, 0.561W, 5-Pin SOT-23

Texas Instruments TPS77515PWPG4 is a fixed 1.5 V, 500 mA low-dropout linear voltage regulator with 285 mV typical dropout voltage, accepting 2.7 V to 10 V input. It offers ±2% output accuracy, thermal shutdown, and current limiting in a 20-pin HTSSOP with exposed pad for efficient thermal dissipation.

TPS77628PWPG4 is a fixed 2.8 V low-dropout linear voltage regulator capable of delivering 500 mA output current with a maximum dropout voltage of 410 mV and input range of 2.7 V to 10 V. Housed in a 20-pin HTSSOP package, it provides ±2% output accuracy for powering RF modules, DSPs, and portable electronics requiring a stable 2.8 V rail.

Texas Instruments TPS77615PWPG4 is a fixed 1.5V LDO voltage regulator delivering up to 500mA output current with a low dropout voltage of 1V. It features tight ±2% output accuracy, 2.7V to 10V input range, and comes in a compact 20-Pin HTSSOP package. Available from stock worldwide with fast shipping.

The TPS77315DGKG4 is a fixed 1.5V low dropout linear voltage regulator from Texas Instruments, delivering 250mA output current with a maximum dropout of 1.2V from a 2.7V–10V input in an 8-pin MSOP/VSSOP package. It provides excellent line and load regulation for noise-sensitive applications. Available from stock with worldwide shipping.

TPS77625PWPG4 is a 500 mA fixed-output 2.5 V low-dropout linear regulator from Texas Instruments with a 0.2 V nominal dropout voltage, ±2% output accuracy, and an input range of 2.7 V to 10 V. The 20-pin HTSSOP package suits DSP, FPGA, and communication board power rails.

The TPS77525PWPG4 is a fixed 2.5V, 500mA low-dropout linear voltage regulator from Texas Instruments with a 0.2V typical dropout, accepting inputs from 2.7V to 10V with excellent line regulation of 0.00183% maximum in a 20-pin HTSSOP exposed-pad package. Offers precision ±2% output accuracy and very low quiescent current. Available from stock worldwide at competitive pricing.

Texas Instruments TPS76725QDG4, LDO Voltage Regulator, 1A, 2.5 V, ±2% 8-Pin, SOIC

Texas Instruments TPS77128DGKG4 is a fixed-output 2.8V LDO linear voltage regulator delivering 150mA output current with a tight 2% accuracy and only 265mV minimum dropout voltage. It accepts input voltages from 3.121V up to 10V for versatile power rail applications. Available in an 8-pin MSOP package with worldwide shipping.

TPS76032DBVRG4 is a 50mA fixed 3.2V LDO voltage regulator with ultra-low 0.12V typical dropout voltage. Accepts input voltages from 3.4V to 16V with tight ±2% output accuracy. Available in compact 5-pin SOT-23 package with worldwide shipping.

The TPS77101DGKG4 is an adjustable low dropout linear voltage regulator from Texas Instruments with 150mA output current and 1V dropout voltage. It supports an output range of 1.5V to 5.5V with ±2% accuracy in an 8-pin MSOP package. Available from stock with worldwide shipping.