Texas Instruments

Motor/Motion/Ignition Controllers & Drivers 35V, 1A bipolar stepper motor driver with integrated current sensing and 1/256 microstepping 16-WQFN -40 to 125

Use the download button to access the LMX2820RTCR schematic symbol and PCB footprint.

Use the download button to access the SN74HCS153DR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the SN74HCS174QDRQ1 schematic symbol, PCB footprint, and 3D model.

MSP430FR5739IRHA is a Texas Instruments microcontroller for embedded control designs. It provides 40 pins, -40°C to 85°C, Quad Flat No-Lead. From RFQ pricing, in-stock sourcing supports worldwide shipping.

LDO Voltage Regulators Fast-Transient Response 1-A

Use the download button to access the DRV8210DSGR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the F280021PTQR schematic symbol, PCB footprint, and 3D model.

LDO Regulator Pos 3.3V 0.5A T/R

Differential Amplifiers High-precision (40 uV offset), 2-MHz, 88dB CMRR, low-power, e-trim difference amplifier 8-SOIC -40 to 125

Use the download button to access the TPS7B8733QKVURQ1 schematic symbol, PCB footprint, and 3D model.

Op Amp Single Precision Amplifier R-R O/P ±3V/6V 8-Pin SOIC Tube

Flip-Flops

DUAL SCHMITT-TRIGGER INVERTER

Flip-Flops

LDO Voltage Regulators Automotive 150-mA, 40-V, low-dropout (LDO) linear regulator with enable and fast transient response

Use the download button to access the CD54HCT00F schematic symbol, PCB footprint, and 3D model.

LP8864 Q1 Automotive Display LED backlight with Four 200 mA Channels

UCC2813-3QDRQ1 is an automotive-qualified current-mode PWM switching controller from Texas Instruments with 4V to 12V input range and 1A peak output current. Features pulse-width modulation control in an 8-pin SOIC package for compact power supply designs. Available in stock worldwide with fast shipping for automotive power applications.

Bus XCVR Single 8-CH 3-ST 20-Pin CDIP Tube

SP Amp ISOL Amp Single 5.5V T/R

USB Interface IC USB Type-C controller with integrated source power switch 32-VQFN -40 to 105

TSSOP-48

Use the download button to access the TLV7031QDCKRQ1 schematic symbol, PCB footprint, and 3D model.

The TMUX7219DGKR is a 44 V latch-up immune 2:1 SPDT precision analog switch from Texas Instruments, featuring 1.8 V logic compatibility and 40 MHz signal bandwidth. It operates from -4.5 V to 22 V and supports signals from -40°C to 125°C, packaged in an 8-pin VSSOP for compact signal routing designs.

Latch Transparent 3-ST 8-CH D-Type 20-Pin CDIP Tube

Multiplexer Switch ICs 44-V, latch-up immune, 8:1 precision multiplexer with 1.8-V logic 16-TSSOP -40 to 125

Switching Controllers LLC resonant controller with ultra-low power, ultra-quiet standby operation and high voltage startup 14-SOIC -40 to 125

Power Switch ICs - Power Distribution 5.5-V, 2-A, 40-m load switch with adjustable current limit 6-DSBGA -40 to 125

SN74ABT2245DWE4 is an octal bidirectional bus transceiver with 3-state outputs and direction control, fabricated in the ABT high-speed logic family and housed in a 20-pin SOIC-wide package. It drives 8 bidirectional data lines at up to 64 mA sink current with propagation delay under 5 ns, operating from 4.5 V to 5.5 V supply. Available from stock with worldwide shipping.

SM320F28335GBS is a 32-bit digital signal controller from Texas Instruments featuring a 150 MHz C28x CPU core, 12-bit ADC with 16 channels, and 256 KB flash memory. It integrates floating-point unit hardware, multiple communication peripherals including SPI, I2C, SCI, and CAN, making it suitable for motor control and power conversion applications.

Gate Drivers 100V Half Bridge Gate Driver with Programmable Dead-Time 10-WSON -40 to 125

Counter Single 12-Bit Binary UP 16-Pin CDIP Tube

Bus Transceivers Octal Trcvr & Ln/MOS Drvr W/3-St Otpt

Texas Instruments ISO6721FBQDRQ1 is an automotive-qualified dual-channel digital isolator with a 2.25 V to 5.5 V supply range, packaged in an 8-pin SOIC (R-PDSO-G8) for reinforced galvanic isolation in general-purpose interface applications, introduced in 2020.

Use the download button to access the ISO6721BQDRQ1 schematic symbol, PCB footprint, and 3D model.

Flip Flop D-Type Pos-Edge 2-Element 14-Pin CDIP Tube

SN74ABT2245NE4 is a Texas Instruments ABT-family octal bidirectional bus transceiver with 3-state outputs in a 20-pin DIP package, supporting 5 V supply and output currents up to 64 mA. Features direction control and a common enable for level-shifting between TTL and CMOS buses. Available from stock with worldwide shipping.

Current Sense Amplifiers AEC-Q100, 2.7-V to 120-V, 1.1-MHz, ultra-precise current sense amplifier in small (SC-70) package 5-SC70 -40 to 125

Use the download button to access the ISO6721BDR schematic symbol, PCB footprint, and 3D model.

Translation - Voltage Levels Automotive 8-bit dual-supply wide voltage level translating transceiver with tri-state output

Buffers & Line Drivers Automotive Schmitt-trigger inputs quadruple bus buffer gates with 3-state outputs 14-TSSOP -40 to 125

LM25184 Q1 42 VIN PSR Flyback DC DC Converter with 65 V 4.1 A MOSFET

Buffers & Line Drivers Differential Line Drivers and Receiver Pair 8-SOIC -40 to 85

Use the download button to access the INA228AIDGST schematic symbol, PCB footprint, and 3D model.

MCU 32-bit ARM Cortex M4F RISC 256KB Flash 1.2V/3.3V 144-Pin LQFP T/R

Analog Comparators Micropower small size comparator (dual, push-pull output) 8-WSON -40 to 125

LDO Voltage Regulators DMOS 1A LDO Reg

The INA228AIDGSR is a single-channel voltage supervisor and reset IC with a user-adjustable threshold, housed in a compact 10-pin small-outline package equivalent to TSSOP-10, well suited for reset supervision in space-constrained embedded and industrial designs.

PINA237AQDGSRQ1 is a -10V 0A integrated circuit by Texas Instruments. Key specs: -10V, 0A, 10 pins. From quote-based pricing, in stock with worldwide shipping for production sourcing.