MCP4361-503E/ST Microchip Integrated Circuit (Small Outline Packages) In Stock

Microchip MCP4361-503E/ST is a quad-channel SPI digital potentiometer with 256 steps and 50 kΩ end-to-end resistance, controlled via 3-wire serial interface, housed in a 20-pin TSSOP package for precision analog adjustment in audio, calibration, and sensor-bias circuits.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
MCP4361-503E/STSmall Outline Packages
Quick Facts
Manufacturer
Microchip
Package
Small Outline Packages
Pin Count
20
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $1.6800(MOQ 1)
Temp Range
-40.0°C to 125.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of MCP4361-503E/ST?

  • Quad independent digital potentiometer channels in a single 20-pin TSSOP package
  • 256-step resolution providing fine-grained analog control with 50 kΩ total resistance
  • 3-wire SPI-compatible serial interface for simple microcontroller integration
  • Non-volatile wiper position storage preserving settings through power cycles
  • RoHS-compliant, lead-free construction for end-product compliance

What is MCP4361-503E/ST used for?

The MCP4361-503E/ST is used in applications requiring software-controlled analog gain, offset trimming, and bias adjustment, such as audio volume controls, sensor-signal conditioning, LCD contrast tuning, and automated test equipment calibration. Its four independent channels and SPI interface allow a single microcontroller to replace multiple manual trimmer potentiometers, enabling remote calibration and factory-end-of-line tuning without board access.

What are the specifications of MCP4361-503E/ST?

Pbfree CodeYes
Manufacturer Package CodeTSSOP-20
Factory Lead Time7Weeks
YTEOL9
Bandwidth-Nom0.2kHz
Control Interface3-WIRE SERIAL
Converter TypeDIGITAL POTENTIOMETER
JESD-30 CodeR-PDSO-G20
JESD-609 Codee3
Number of Functions4
Number of Positions257
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeTSSOP20,.25
Package ShapeRECTANGULAR
Package StyleSMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
Resistance LawLINEAR
Resistance Tolerance-Max20%
Resistor Terminal Voltage-Max5.5V
Screening LevelTS 16949
Supply Current-Max0.6mA
Supply Voltage-Nom2.7V
Surface MountYES
TechnologyCMOS
Temperature Coefficient-Nom150ppm/°C
Temperature GradeAUTOMOTIVE
Terminal FinishMatte Tin (Sn)
Terminal FormGULL WING
Terminal Pitch0.65mm
Terminal PositionDUAL
Time@Peak Reflow Temperature-Max (s)40
Total Resistance-Nom50000Ω
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
HTS Code8542.39.00.60
Country of OriginPhilippines, Thailand

Where can I find the MCP4361-503E/ST datasheet?

MCP4361-503E/ST Datasheet Download

Official datasheet from Microchip

What are equivalent replacements for MCP4361-503E/ST?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

With 256 steps over a 50 kΩ range, what is the wiper step size of MCP4361-503E/ST and how does that affect gain resolution?

Dividing 50 kΩ by 256 steps gives approximately 195 Ω per step. In a non-inverting amplifier circuit with a 10 kΩ fixed resistor, this step size translates to a gain change of roughly 0.02 V/V per step, sufficient for audio volume adjustment or sensor-offset trimming where continuous fine resolution is more important than absolute accuracy of the end-to-end resistance.

Does MCP4361-503E/ST retain its wiper position after a power cycle, and how does that benefit field-calibrated equipment?

The MCP4361 includes non-volatile memory (EEPROM) that stores each channel's wiper position through power cycles. In field-calibrated instruments, this means a one-time factory calibration value survives power loss, battery swaps, or firmware resets, eliminating the need for re-calibration on each startup and reducing service calls in instruments such as gas analyzers or weighing systems.

In a 4-channel potentiometer design, how does the MCP4361-503E/ST's TSSOP-20 package compare to using four discrete single-channel pot ICs?

Four single-channel SOT-23 digital potentiometers would occupy roughly 4×7 mm² = 28 mm² of board area, while the MCP4361 TSSOP-20 body is approximately 6.4×4.4 mm = 28 mm²—similar footprint—but requires only 1 decoupling capacitor and 3 shared SPI lines instead of 12+ individual control lines. This reduces wiring complexity and SPI bus overhead, particularly in microcontrollers with limited GPIO.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Microchip

Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $1.6800
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$2.4900$2.49
25+$2.4400$61.00
74+$2.1900$162.06
100+$1.8700$187.00
1000+$1.8300$1830.00
2516+$1.6800$4226.88
pcs
Unit price: $2.4900 · Total: $2.49

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.

SK
Sarah Kim
VP Engineering, NovaBit Electronics, South Korea