MCP4252-103E/UN Microchip Integrated Circuit (Small Outline Packages) In Stock

Microchip MCP4252-103E/UN is a dual-channel 10 kOhm digital potentiometer with 257 wiper positions and SPI increment/decrement interface in MSOP-10 package. Operates from 1.8 V to 5.5 V with 1 kHz bandwidth. Available from stock worldwide with fast shipping.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
MCP4252-103E/UNSmall Outline Packages
Quick Facts
Manufacturer
Microchip
Package
Small Outline Packages
Pin Count
10
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $0.8370(MOQ 1)
Temp Range
-40.0°C to 125.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • Dual independent 10 kOhm channels in a single MSOP-10 package, halving board area versus two discrete potentiometers in stereo or differential applications
  • 257-position wiper resolution provides sub-40 Ohm step increments for precise closed-loop gain and offset calibration
  • SPI increment/decrement interface with 1.8 V to 5.5 V compatibility integrates directly with low-power 3.3 V microcontrollers without level translation

Applications

MCP4252-103E/UN is ideal for stereo audio balance controls, differential amplifier gain trimming, and dual-axis sensor calibration circuits that require two independently adjustable resistances in one compact MSOP-10 body. Its 257-position resolution and 1 kHz bandwidth support real-time adaptive filtering in hearing-aid front-ends and portable medical devices operating from 1.8 V to 5.5 V. Industrial programmable power supplies and instrumentation amplifier offset networks also rely on its dual-channel architecture to simultaneously adjust coarse and fine trim paths.

Specifications

Pbfree CodeYes
Manufacturer Package CodeMSOP-10
Factory Lead Time6Weeks
YTEOL9
Bandwidth-Nom1kHz
Control InterfaceINCREMENT/DECREMENT
Converter TypeDIGITAL POTENTIOMETER
JESD-30 CodeS-PDSO-G10
JESD-609 Codee3
Number of Functions1
Number of Positions257
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeTSSOP10,.19,20
Package ShapeSQUARE
Package StyleSMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
Resistance LawLINEAR
Resistance Tolerance-Max20%
Resistor Terminal Voltage-Max5V
Supply Current-Max1mA
Supply Voltage-Nom5V
Surface MountYES
TechnologyCMOS
Temperature Coefficient-Nom150ppm/°C
Temperature GradeAUTOMOTIVE
Terminal FinishMatte Tin (Sn)
Terminal FormGULL WING
Terminal Pitch0.5mm
Terminal PositionDUAL
Total Resistance-Nom10000Ω
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCNEAR99
HTS Code8542.39.00.01
Country of OriginThailand

Datasheet

MCP4252-103E/UN Datasheet Download

Official datasheet from Microchip

Alternate & Equivalent Parts

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

How many wiper positions does MCP4252-103E/UN offer and what resistance step size does that translate to?

The MCP4252-103E/UN provides 257 wiper positions across a 10 kOhm end-to-end resistance, resulting in a nominal step increment of approximately 39 Ohm per position. This resolution is sufficient for precision gain adjustments in instrumentation amplifiers and fine tuning of filter cutoff frequencies between 100 Hz and 10 kHz in active filter designs.

What advantages does MCP4252-103E/UN offer over two separate single-channel digital potentiometers in a stereo design?

MCP4252-103E/UN integrates 2 independent 10 kOhm channels in one MSOP-10 package, reducing component count by 1 IC and saving roughly 10 mm2 of PCB area compared with using two separate 8-pin devices. Both channels share a single SPI bus connection, cutting GPIO requirements to 3 pins for CS, SCK, and SI while still allowing independent step-by-step control of each channel.

Which supply voltage rails is MCP4252-103E/UN compatible with for use in mixed-voltage embedded systems?

MCP4252-103E/UN operates from 1.8 V to 5.5 V, covering 1.8 V ultra-low-power processors, 3.3 V ARM Cortex-M systems, and 5 V AVR or PIC microcontrollers without any level-shifting circuitry. Its 1 kHz bandwidth and 6-week factory lead time make it a readily available solution for production runs requiring dual-channel analog control in compact mixed-signal boards.

For an automatic gain control loop, how quickly can firmware update MCP4252-103E/UN wiper positions?

The SPI increment/decrement interface supports clock rates up to 10 MHz, allowing firmware to step the wiper position across all 257 levels in under 30 µs per channel. This response time is fast enough for audio AGC loops that must track signal envelope changes at 1 kHz bandwidth, making MCP4252-103E/UN a practical solution in hearing-aid and active noise-cancellation applications.

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Microchip

Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.8370
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$1.2400$1.24
5+$1.1200$5.60
25+$1.0700$26.75
100+$0.9300$93.00
1000+$0.8900$890.00
5000+$0.8370$4185.00
pcs
Unit price: $1.2400 · Total: $1.24

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.

SK
Sarah Kim
VP Engineering, NovaBit Electronics, South Korea