MCP4341-502E/ST Microchip Integrated Circuit (Small Outline Packages) In Stock
MCP4341-502E/ST is a quad-channel 7-bit digital potentiometer from Microchip with a 5 kohm end-to-end resistance and 128 wiper positions per pot. It communicates over a 3-wire SPI interface and stores wiper settings in on-chip EEPROM for power-loss retention, available in a 20-pin TSSOP package for compact PCB designs.
- Manufacturer
- Microchip
- Package
- Small Outline Packages
- Pin Count
- 20
- Lifecycle
- ACTIVE
- Datasheet
- MCP4341-502E/ST Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $1.2400(MOQ 1)
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of MCP4341-502E/ST?
- Quad independent 5 kohm digital potentiometers in a single 20-pin TSSOP package, replacing four discrete mechanical trimmers
- 128 wiper steps (7-bit resolution) providing approximately 39 ohm per step for fine gain and offset adjustment
- Non-volatile EEPROM wiper position storage retaining last-set resistance values across power cycles without host firmware intervention
- 3-wire SPI interface with daisy-chain support enabling control of multiple MCP4341 devices from a single microcontroller SPI bus
What is MCP4341-502E/ST used for?
The MCP4341-502E/ST is used in programmable gain amplifier stages, calibration offset trimmers, and LCD contrast adjustment circuits where mechanical potentiometers are impractical. Industrial process control systems use it to digitally adjust sensor signal conditioning networks via SPI, storing calibration values in its EEPROM so settings persist after power cycling. Audio equipment, instrumentation, and automated test equipment also leverage its four independent wiper channels to replace multiple manual adjustment points with software-controlled tuning.
What are the specifications of MCP4341-502E/ST?
| Pbfree Code | Yes |
| Manufacturer Package Code | TSSOP-20 |
| Factory Lead Time | 6Weeks |
| YTEOL | 9 |
| Bandwidth-Nom | 2kHz |
| Control Interface | 3-WIRE SERIAL |
| Converter Type | DIGITAL POTENTIOMETER |
| JESD-30 Code | R-PDSO-G20 |
| JESD-609 Code | e3 |
| Number of Functions | 4 |
| Number of Positions | 129 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | TSSOP20,.25 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
| Peak Reflow Temperature (Cel) | 260 |
| Qualification Status | Not Qualified |
| Resistance Law | LINEAR |
| Resistance Tolerance-Max | 20% |
| Resistor Terminal Voltage-Max | 5.5V |
| Screening Level | TS 16949 |
| Supply Current-Max | 0.6mA |
| Supply Voltage-Nom | 2.7V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Coefficient-Nom | 150ppm/°C |
| Temperature Grade | AUTOMOTIVE |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Total Resistance-Nom | 5000Ω |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| HTS Code | 8542.39.00.60 |
| Country of Origin | Philippines, Thailand |
Where can I find the MCP4341-502E/ST datasheet?
MCP4341-502E/ST Datasheet DownloadOfficial datasheet from Microchip
What are equivalent replacements for MCP4341-502E/ST?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How many discrete resistance steps does the MCP4341-502E/ST provide across its 5 kohm range?
The MCP4341-502E/ST offers 128 wiper positions across a 5 kohm end-to-end resistance, yielding a step size of approximately 39 ohm per LSB. This resolution is sufficient for fine gain trimming in instrumentation amplifier circuits and offset nulling in data acquisition front-ends where a 0.8% adjustment step meets the required calibration granularity.
How does the on-chip EEPROM benefit a design that loses power unexpectedly?
The MCP4341 EEPROM retains the wiper position programmed by the host and automatically restores it at power-up without any SPI transaction, meaning calibration offsets and gain settings survive brownouts and unplanned shutdowns. This removes the need for a dedicated NVM in the system and eliminates the firmware initialization sequence that would otherwise be required to re-load potentiometer settings from an external Flash device.
What SPI clock rate does the MCP4341-502E/ST support and how quickly can all 4 wipers be updated?
The MCP4341-502E/ST SPI interface operates at clock rates up to 10 MHz. A single 16-bit write command updates one wiper in 1.6 µs at 10 MHz; updating all 4 channels with daisy-chain transfers requires four sequential 16-bit frames, completing the full quad update in approximately 6.4 µs. This is fast enough for real-time gain scheduling in audio processing and control loops running at multi-kilohertz sample rates.
How does replacing four discrete 5 kohm trimmers with a single MCP4341-502E/ST affect PCB space?
Four standard 3-mm square SMT trimmers occupy approximately 36 mm2 of board area plus routing clearances. The MCP4341-502E/ST in a 20-pin TSSOP measures 6.5 mm x 4.4 mm (about 28.6 mm2), and its SPI interface reduces dedicated adjustment access pads to just 4 shared signals. The net board space saving is typically 20% to 40% depending on trimmer placement, while also eliminating mechanical drift and the need for periodic re-trimming.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
More from Microchip
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $1.8500 | $1.85 |
| 25+ | $1.8200 | $45.50 |
| 74+ | $1.6200 | $119.88 |
| 100+ | $1.4000 | $140.00 |
| 1000+ | $1.3600 | $1360.00 |
| 2516+ | $1.2400 | $3119.84 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit