Microchip

The MCP100-475HI/TO is a single-channel voltage supervisor and microprocessor reset IC with an active-low open-drain output, fixed 4.75 V threshold, and TO-92-3 through-hole package. It monitors supply voltage and asserts a reset signal when VCC falls below the threshold, ensuring reliable system startup and recovery.

MCP1642B-ADJI/MS is a voltage regulator by Microchip. Key specs include Additional Feature: ADJ OUTPUT FROM 1.8V TO 5.5V; Input Voltage-Max: 3 V. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

DSPIC33EP32MC202-I/SS is a microcontroller by Microchip. Key specs include Bit Size: 16; Clock Frequency-Max: 60 MHz. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

MCP1642B-50I/MS is a current-mode PWM synchronous boost regulator from Microchip with a fixed 5.0 V output, accepting input voltage from 2.5 V to 4.2 V, housed in an 8-pin MSOP package, ideal for battery-powered systems requiring a regulated 5 V supply from a single Li-Ion cell.

MCU, Enhanced Core, Int Osc, 8PDIP Microchip PIC12F1822-E/P, 8bit PIC Microcontroller, 32MHz, 256 B, 2K x 14 words Flash, 8-Pin PDIP

Microchip PIC12F1822T-I/SN is an 8-bit PIC12 microcontroller running up to 32 MHz, with integrated ADC and a minimum 1.8 V supply at 16 MHz, in a compact SOIC-8 package. It offers lead-free, RoHS-compliant construction ideal for small-footprint embedded designs.

The PIC16LF1503-I/SL is an 8-bit PIC microcontroller running at up to 20 MHz with 2048 words of Flash memory and 128 bytes of RAM in a 14-pin SOIC package. It features integrated ADC, DAC channels, and operates down to 1.8 V supply voltage. Available from stock with worldwide shipping.

VQFN-16

PIC24FJ16MC102-I/SS is a 16-bit PIC24F microcontroller from Microchip with 16 KB Flash memory and motor control peripherals in a 28-pin SSOP package. It operates at up to 32 MHz and includes an integrated ADC for direct sensor input. Available worldwide for low-power motor drive and embedded control applications.

Microchip MCP4351-103E/ML is a quad-channel non-volatile digital potentiometer with 10 kΩ end-to-end resistance and 257 wiper positions per channel. It communicates over 3-wire SPI and operates from 1.8 V to 5.5 V, housed in a compact 20-pin QFN package. Ideal for precise programmable gain, offset trimming, and calibration circuits.

PIC16LF1503-I/ST is a microcontroller by Microchip. Key specs include Additional Feature: ALSO OPERATES AT 1.8V MIN SUPPLY...; Bit Size: 8. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

dsPIC33EP32GS504-I/PT is a microcontroller by Microchip. Key specs include Bit Size: 16; Clock Frequency-Max: 60 MHz. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

Micrel, 4.75 → 5.25 V Low Dropout Voltage Regulator, 25mA, 1-Channel, ±3% 8-Pin, MSOP MIC5281-5.0YMM

PIC16F1508-E/SS is an 8-bit PIC16 microcontroller running up to 20 MHz with integrated ADC, DAC channels, and XLP low-power operation from a minimum 2.3 V supply in a 20-pin SSOP package. Ideal for battery-powered sensor nodes, appliance controls, and cost-sensitive embedded designs requiring analog and digital integration.

Microchip DSPIC33EP32MC204-I/PT is a 16-bit DSC with 60 MHz clock, 32KB Flash, hardware barrel shifter, motor control peripherals, and 44-pin TQFP package for embedded digital signal control designs.

0.300 INCH, SKINNY, LEAD FREE, PLASTIC, MO-095, DIP-28

10 X 10 MM, 1 MM HEIGHT, 0.80 MM PITCH, PLASTIC, TQFP-44

Microchip MCP1603T-120I/OS is a 2.0 MHz synchronous buck regulator with a fixed 1.2 V output and 500 mA current capability, powered from a 2.7 V to 5.5 V input supply. Its current-mode PWM/PFM control and SOT-23-5 footprint make it ideal for low-voltage MCU core rails and portable device power trees.

8-bit Microcontrollers - MCU 32KB Flash 1536B RAM 25 I/O 8B

FPGA - Field Programmable Gate Array 10K Gate 2NS

Microchip MCP4351-104E/ST is a quad-channel 8-bit digital potentiometer with 257 wiper positions and a 100 kΩ end-to-end resistance, controlled via 3-wire SPI interface. It integrates four independent resistor networks in a single 20-pin TSSOP package, enabling compact digitally-controlled analog signal adjustment. Well-suited for gain control, offset calibration, and programmable filtering applications.

LEAD FREE, SOP-8

The DSPIC33EP32GP502T-I/SS is a Microchip 16-bit digital signal controller with 32 KB Flash and 4 KB RAM, clocked at up to 60 MHz in a 28-pin SSOP package. It features a hardware barrel shifter, boundary scan, and fixed-point DSP engine for real-time signal processing in industrial and motor control designs.

MICROCHIP - ATMEGA1284-AUR - 8 Bit MCU, AVR ATmega Family ATmega128 Series Microcontrollers, 20 MHz, 128 KB, 16 KB, 44 Pins

USB2640-HZH-02 is a clock IC by Microchip. Key specs include Bus Compatibility: I2C; SMBUS; SPI; USB; Clock Frequency-Max: 24 MHz. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

DSPIC33EP32GP502-E/MM is a microcontroller by Microchip. Key specs include Bit Size: 16; Clock Frequency-Max: 60 MHz. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

MICROCHIP - MIC5504-2.8YM5-TR - LDO VOLT REG, 0.3A, 2.8V, SOT-23-5

QFP-208

Microchip DSPIC33EP32GP502-I/MM is a 16-bit dsPIC33E digital signal controller with 32KB Flash, 60 MHz max clock, hardware barrel shifter, and boundary scan in a compact 28-pin QFN-S package at 3.3V.

MCU 16-bit dSPIC33 dsPIC RISC 32KB Flash 3.3V 28-Pin SPDIP Tube

MCU 8-bit ATmega AVR RISC 32KB Flash Atmel ATMEGA328P-MN, 8bit AVR Microcontroller, 20MHz, 32 kB Flash, 32-Pin MLF

The MCP3918A1-E/SS is a single-channel analog circuit IC from Microchip, designed for precision analog signal processing in data acquisition systems. Housed in a 20-pin SSOP package, it is RoHS-compliant and offers a compact footprint suitable for space-constrained industrial and measurement applications.

QFN-64

MICROCHIP - ATSAM4N16CA-AU - MCU, 32BIT, CORTEX-M4, 100MHZ, QFP-100

MICROCHIP - ATMEGA1284P-MUR - MCU, 8BIT, AVR, 20MHZ, VQFN-44

High current sink/source 25 mA/25 mA • Three external interrupt pins • Timer0 module: 8-bit/16-bit timer/counter with 8-bit programmable prescaler • Timer1 module: 16-bit timer/counter • Timer2 module: 8-bit timer/counter with 8-bit period register (time base for PWM) • Timer3 module: 16-bit timer/counter • Secondary oscillator clock option – Timer1/Timer3 • Capture/Compare/PWM (CCP) modules; CCP pins can be configured as: - Capture input: 16-bit, max resolution 6.25 ns - Compare: 16-bit, max re

Use the download button to access the ATF1508AS-7JX84 schematic symbol, PCB footprint, and 3D model.

Use the download button to access the ATF1508AS-10JU84 schematic symbol and PCB footprint.

CPLD - Complex Programmable Logic Devices 128 MC CPLD 5 V ISP CPLD 100 PIN 10NS

LDO Voltage Regulators 150mA 1% Low Noise LDO

MCU 8-Bit PIC18 32KB Flash ECAN PQFN28EP Microchip PIC18F25K80-I/MM, 8bit PIC Microcontroller, 64MHz, 32 kB Flash, 28-Pin QFN

Bluetooth Modules (802.15.1) BT 4.2 dual-mode no shield no ant

Enhanced Flash Microcontrollers

EEPROM PB/HALO free NiPdAu, 1.7V

14 X 14 MM, 1 MM THICKNESS, 0.80 MM PITCH, GREEN, PLASTIC, MS-026AEB, TQFP-64

EEPROM PB/HALO free MATT TIN, 1.7V

Microchip Technology MCP7940NT-I/SN, Real Time Clock (RTC), 64B RAM Serial-2 Wire, Serial-I2C, 8-Pin SOIC

Microchip PIC18F67J94-I/PT is an 8-bit PIC18 microcontroller with 64 MHz clock, 128 KB Flash, integrated USB and LCD controller in a 64-pin TQFP package. It features ADC, XLP low-power technology, and a 20-bit address bus. Available from stock with worldwide shipping.

The PIC16F1778-I/SS is an 8-bit PIC microcontroller from Microchip with 28KB Flash, 2KB RAM, and a 10-bit ADC in an SSOP-28 package. It runs at up to 32 MHz and includes DAC channels for mixed-signal applications. A versatile mid-range MCU with worldwide availability for industrial sensing and control designs.

SOIC-8