DSPIC33EP32GP502T-I/SS Microchip Integrated Circuit (Small Outline Packages) In Stock

The DSPIC33EP32GP502T-I/SS is a Microchip 16-bit digital signal controller with 32 KB Flash and 4 KB RAM, clocked at up to 60 MHz in a 28-pin SSOP package. It features a hardware barrel shifter, boundary scan, and fixed-point DSP engine for real-time signal processing in industrial and motor control designs.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
DSPIC33EP32GP502T-I/SSSmall Outline Packages
Quick Facts
Manufacturer
Microchip
Package
Small Outline Packages
Pin Count
28
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $1.7900(MOQ 1)
Temp Range
-40.0°C to 85.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of DSPIC33EP32GP502T-I/SS?

  • 60 MHz 16-bit DSP core with hardware barrel shifter delivers real-time fixed-point signal processing without software shift loops
  • 32 KB Flash and 4 KB RAM in a compact 28-pin SSOP package supports code-dense embedded control algorithms in small PCB footprints
  • Boundary scan (JTAG) compliance simplifies board-level production testing and in-circuit debugging during development
  • Multiple internal bus architecture enables simultaneous instruction fetch and data access, reducing pipeline stalls in DSP-intensive control loops

What is DSPIC33EP32GP502T-I/SS used for?

The DSPIC33EP32GP502T-I/SS targets digital motor control, switched-mode power supply regulation, and real-time sensor signal processing in industrial equipment where 16-bit DSP accuracy is required without the cost of a full DSP chip. Its 60 MHz core clock supports fast PID loops at update rates up to 100 kHz, making it well suited for brushless DC motor drives, inverter control, and active power factor correction circuits. Engineers in appliance and HVAC control designs favor the SSOP-28 form factor for its balance between pin count, board area, and peripheral richness including comparators, PWM outputs, and ADC channels.

What are the specifications of DSPIC33EP32GP502T-I/SS?

Manufacturer Package CodeSSOP-28
Factory Lead Time6Weeks
YTEOL14
Barrel ShifterYES
Bit Size16
Boundary ScanYES
Clock Frequency-Max60MHz
FormatFIXED POINT
Integrated CacheNO
Internal Bus ArchitectureMULTIPLE
JESD-30 CodeR-PDSO-G28
JESD-609 Codee3
Low Power ModeYES
Number of DMA Channels4
Number of External Interrupts3
Number of Timers5
On Chip Data RAM Width8
On Chip Program ROM Width8
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeSSOP28,.3
Package ShapeRECTANGULAR
Package StyleSMALL OUTLINE, SHRINK PITCH
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
RAM (words)4096
ROM ProgrammabilityFLASH
Screening LevelTS 16949
Supply Current-Max55mA
Supply Voltage-Max3.6V
Supply Voltage-Min3V
Supply Voltage-Nom3.3V
Surface MountYES
TechnologyCMOS
Temperature GradeINDUSTRIAL
Terminal FinishMatte Tin (Sn)
Terminal FormGULL WING
Terminal Pitch0.65mm
Terminal PositionDUAL
Time@Peak Reflow Temperature-Max (s)40
uPs/uCs/Peripheral ICs TypeDIGITAL SIGNAL PROCESSOR, CONTROLLER
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 2
ECCN3A991.A.2
HTS Code8542.31.00.01
Country of OriginPhilippines, Thailand

Where can I find the DSPIC33EP32GP502T-I/SS datasheet?

DSPIC33EP32GP502T-I/SS Datasheet Download

Official datasheet from Microchip

What are equivalent replacements for DSPIC33EP32GP502T-I/SS?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What is the maximum CPU clock frequency of DSPIC33EP32GP502T-I/SS and how many MIPS does it deliver?

The DSPIC33EP32GP502T-I/SS operates at up to 60 MHz instruction cycle frequency, delivering 60 MIPS of throughput under typical conditions. This performance level is sufficient to run a 100 kHz PID motor control loop with approximately 400 instruction cycles per update, leaving headroom for communications and fault monitoring code without requiring an external co-processor.

How does the hardware barrel shifter in DSPIC33EP32GP502T-I/SS benefit fixed-point DSP algorithm implementations?

The hardware barrel shifter allows 16-bit or 32-bit operands to be shifted by up to 16 positions in a single instruction cycle, eliminating multi-cycle software shift loops required on processors lacking this feature. In fixed-point FIR filter and FFT kernels, this saves 2-8 cycles per multiply-accumulate operation, reducing a 64-tap filter loop execution time from approximately 640 cycles to under 450 cycles at 60 MHz.

Which motor control topologies can DSPIC33EP32GP502T-I/SS handle given its PWM and ADC resources?

DSPIC33EP32GP502T-I/SS includes PWM outputs and high-speed ADC channels suited for 3-phase brushless DC (BLDC) motor control, stepper motor micro-stepping, and DC-DC buck converter regulation. The device supports complementary PWM pairs with programmable dead-time insertion to prevent shoot-through in half-bridge stages operating at switching frequencies up to 100 kHz, covering most motor winding impedance profiles in the 1 A to 10 A range.

How does DSPIC33EP32GP502T-I/SS compare to DSPIC33EP64GP502 in memory for designs that need more Flash?

The DSPIC33EP32GP502T-I/SS provides 32 KB of Flash and 4 KB of RAM, while the DSPIC33EP64GP502 doubles Flash to 64 KB in the same 28-pin package footprint. If the firmware image for a motor control application grows beyond 28 KB after compiler optimization, migrating to the 64 KB variant avoids board respins since both share an identical 28-pin SSOP pinout and peripheral mapping, with only a minor unit price increase of approximately 20% at volume.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Microchip

Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $1.7900
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$2.4700$2.47
100+$2.0600$206.00
1000+$1.8700$1870.00
5000+$1.7900$8950.00
pcs
Unit price: $2.4700 · Total: $2.47

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.

MR
Marco Rossi
CTO, AutoDrive Systems, Italy