Microchip

The MCP6V64-E/ST is a quad auto-zero (chopper) operational amplifier from Microchip featuring rail-to-rail input and output, 120 dB minimum CMRR, and 50 fA maximum bias current, operating from a 5.5 V supply and housed in a 14-pin TSSOP package. It delivers precision DC accuracy for sensor amplification and instrumentation designs.

MICROCHIP - ATSAM3S1BB-AU - MCU, 32BIT, CORTEX-M3, 64MHZ, QFP-64

6Vin, Single 500mA ULDO

MCP23008-E/ML is an 8-bit general-purpose I/O port expander from Microchip using the I2C interface with configurable address pins. Supports interrupt output and 25 mA sink/source per pin from a 1.8 V to 5.5 V supply. Available from stock worldwide with fast shipping.

Microchip PIC18C452-I/PT is an 8-bit PIC18 microcontroller operating at up to 40 MHz with ROM-based OTP program memory and an integrated 10-bit ADC. It delivers high-performance RISC processing in a compact 44-pin TQFP package measuring 10 mm × 10 mm. Suited for production-committed embedded control and legacy industrial designs.

Use the download button to access the MIC2940A-3.3WT schematic symbol and PCB footprint.

Microchip MCP1603T-250I/OS is a 2.0 MHz synchronous buck regulator delivering up to 500 mA output current with a fixed 2.5 V output, operating from a 2.7 V to 5.5 V input supply. Its current-mode PWM control and tiny SOT-23-5 package make it ideal for portable and space-constrained power rails.

MCP23008T-E/ML is a tape-reel packaged 8-bit I2C general-purpose I/O expander from Microchip supporting up to 10 MHz clock in a QFN-20 package. Provides 8 configurable GPIO pins with interrupt-on-change from a 1.8 V to 5.5 V supply. Available from stock worldwide with fast shipping.

Microchip MCP4014T-503E/OT is a volatile single-channel digital potentiometer with 50 kΩ end-to-end resistance and an increment/decrement control interface. It features a nominal bandwidth of 0.2 kHz, fits in a compact 5-pin SOT-23 package, and is RoHS-compliant lead-free for use in consumer and industrial electronics.

Microchip PIC16C66-04/SO is an 8-bit PIC16 family OTP microcontroller operating at up to 4 MHz in a 28-pin SOIC package. Offers digital I/O without ADC in a 0.300-inch plastic SOIC-28 form factor introduced in 1993 for cost-sensitive embedded designs. Available from authorized distributors with worldwide shipping.

Linear Voltage Regulators Linear Regulator IC

Microchip PIC16C66-04/SP is an 8-bit PIC16 OTP microcontroller running up to 4 MHz with 22 digital I/O lines and on-chip UART, SPI, and I2C peripherals. It offers 8 KB of one-time programmable program memory in a 28-pin narrow DIP package. Available in stock from authorized distributors with worldwide shipping.

Use the download button to access the LR12N3-G schematic symbol, PCB footprint, and 3D model.

SOIC-8

PIC18F2431-I/SP is a microcontroller by Microchip. Key specs include Bit Size: 8; CPU Family: PIC18. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

Microchip 11AA02E64-I/SN is a 2 Kbit serial EEPROM with factory-programmed EUI-64 node identity operating from a 1.8 V supply. It communicates via a 1-wire serial interface at up to 0.1 MHz clock frequency and is rated for industrial temperatures in an SOIC-8 package. Available in industrial-grade versions with worldwide shipping and broad distributor stock.

Microchip SR086SG-G is a voltage-mode switching regulator IC supporting universal 90 VAC to 270 VAC input and up to 100-mA maximum output current for offline power supply designs. Integrates control and regulation in a compact SOIC-8 package. Available in stock with worldwide shipping.

Microchip MCP1827S-1802E/AB is a fixed 1.8 V LDO linear voltage regulator capable of delivering up to 1.5 A output current with a nominal dropout voltage of 0.33 V. It accepts input voltages from 2.44 V to 6 V and comes in a through-hole TO-220-3 package with RoHS-compliant lead-free construction.

MCP2003B-E/SN is a single-channel LIN bus transceiver compliant with LIN 2.x standards in an 8-pin SOIC package, providing a fully integrated physical layer interface between a microcontroller UART and the automotive LIN network.

The 24LC32A-I/P is a Microchip 32 Kbit serial EEPROM in an 8-pin DIP package communicating over the I2C bus at up to 400 kHz. It guarantees over 1 million erase/write cycles and more than 200 years of data retention for non-volatile storage in embedded systems.

ATMEL - ATMEGA328PB-AU - MCU, 8BIT, ATMEGA, 20MHZ, TQFP-32

MCP1827S-1202E/AB is a fixed 1.2 V, 1.5 A LDO linear voltage regulator from Microchip with a 0.33 V typical dropout voltage, 2.3 V to 6 V input range, and a 3-pin TO-220 package for easy through-hole power rail regulation.

The MCP1700T-1202E/TT is a fixed 1.2 V low-dropout linear regulator from Microchip delivering up to 250 mA output with a typical dropout voltage of only 0.15 V in a 3-pin SOT-23 package. It accepts input voltages up to 6 V and is REACH-compliant and lead-free, making it ideal for battery-powered and space-constrained applications. Well-suited for powering microcontrollers, FPGAs, memory devices, and low-voltage digital logic from Li-ion or single-cell battery supplies.

Microchip MCP1700-3002E/TO is a fixed 3.0 V low-dropout linear regulator with 178 mV typical dropout voltage and 250 mA output current in a TO-92-3 through-hole package. It accepts 4 V to 6 V input and suits battery-powered microcontroller and sensor supply applications.

The MCP1700-5002E/TO is a 250mA fixed 5.0V low-dropout LDO regulator in a through-hole TO-92 package. It features a typical dropout voltage of only 178mV, an input voltage range up to 6V, and low quiescent current. Available in stock from authorized distributors with worldwide shipping.

Microchip 24LC32A/SN is a 32 Kbit I2C serial EEPROM in SOIC-8 package with 1,000,000 write/erase cycle endurance, over 200-year data retention, and 100 kHz 2-wire interface. Available from stock with worldwide shipping.

Microchip 24LC32AT-I/SN is a 32 Kbit (4K x 8) serial EEPROM with I2C interface in SOIC-8 package, supporting 400 kHz fast-mode clock. Delivers over 1,000,000 erase/write cycles and more than 200-year data retention for reliable non-volatile storage.

Microchip 24LC32AT-E/OT is a 32Kbit (4KB) I2C serial EEPROM in a compact 5-pin SOT-23 package with up to 400kHz clock, 1,000,000 write/erase endurance cycles, and 200-year data retention. It offers reliable non-volatile storage for configuration and calibration data. Available worldwide with fast shipping.

MICROCHIP - MCP73831T-3ACI/OT - BATT CHARGER, -40 TO 85DEG C

Microchip PIC18F43K22-I/PT is an 8-bit PIC18 microcontroller with 8 KB flash, 3968 bytes of RAM, and a maximum clock of 64 MHz in a 44-pin TQFP package. It operates from 2.3 V at 20 MHz and up to 5.5 V at 64 MHz, integrating a 10-bit ADC and multiple serial interfaces. Available from authorized distributors worldwide with global shipping.

32K I2C Serial EEPROM

Microchip MCP1700-1202E/TO is a fixed 1.2 V low-dropout linear regulator delivering 250 mA output with only 0.15 V typical dropout and a 2% output accuracy in a 3-pin TO-92 package. Operates from 2.3 V to 6 V input, making it ideal for low-voltage battery-powered and portable designs.

Use the download button to access the MIC2940A-12WU schematic symbol and PCB footprint.

8-bit Microcontrollers - MCU 8KBFlash 256bytesRAM 256bytesEEPROM

PIC18LF43K22-I/PT is a microcontroller by Microchip. Key specs include Additional Feature: ALSO OPERATES 1.8 V MINIMUM SUPPLY...; Bit Size: 8. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

Use the download button to access the HV9120NG-G schematic symbol, PCB footprint, and 3D model.

Microchip PIC18F43K22-I/P, 8bit PIC18F Microcontroller, 16MHz, 8 kB Flash, 40-Pin PDIP

Microchip PIC18F43K22-E/P, 8bit PIC18F Microcontroller, 16MHz, 8 kB Flash, 40-Pin PDIP

Microchip ENC28J60-I/SP is a standalone 10Base-T Ethernet controller with an SPI interface operating at up to 25 MHz, housed in a 28-pin SPDIP package with 0.300-inch row spacing. It integrates a MAC, PHY, and 8 KB receive/transmit buffer. Available from authorized distributors with worldwide shipping.

Microchip MCP4162-502E/P is a single-channel 5 kΩ digital potentiometer with 256 wiper positions and an increment/decrement serial control interface. It operates with a 2 kHz bandwidth and is packaged in an 8-pin PDIP for easy prototyping and through-hole assembly. Ideal for programmable gain, volume control, and calibration circuits in industrial and consumer electronics.

Microchip MCP6141-I/P is a voltage-feedback operational amplifier in PDIP-8 package, featuring 62 dB minimum CMRR, 0.005 µA bias current, and internal frequency compensation. From $0.60 in stock, worldwide shipping.

3 X 3 MM, 0.90 MM HEIGHT, QFN-16

The MCP73832T-2ACI/MC is a miniature single-cell Li-Ion and Li-Polymer linear charge management controller from Microchip with adjustable charge current up to 500 mA and integrated charge status output. It is housed in a tiny DFN-8 package for compact portable device designs. Available in stock with worldwide shipping.

Microchip PIC16F1716T-I/ML is an 8-bit PIC16 microcontroller with 14 KB Flash, 1 KB RAM, 32 MHz maximum clock, integrated ADC and DAC channels, and I2C/SPI interfaces in a compact 28-pin VQFN package. Operates from as low as 2.3 V at 16 MHz for battery-powered designs with worldwide availability.

ARM Microcontrollers - MCU

LDO Voltage Regulators 1.0A 1.0% Fixed Voltage LDO

Microchip PIC16F1716-E/SP is an 8-bit PIC microcontroller with 8KB Flash, 1024B RAM, and a 10-bit ADC running at up to 32 MHz. It includes DAC channels, high-speed comparators, and operates from 2.3V minimum supply. Available in a 28-pin SPDIP package for extended temperature industrial designs.

The MCP2003-E/MD is a LIN (Local Interconnect Network) bus transceiver from Microchip, providing the physical layer interface between a LIN master or slave node and the single-wire LIN bus, housed in an 8-pin DFN package. It supports LIN 2.x protocol and is designed for automotive body electronics and industrial networks requiring low-cost single-wire serial communication. Suitable for body control modules, lighting systems, and motor actuator networks in vehicles.

The 24AA64T-I/OT is a 64 Kbit I2C serial EEPROM from Microchip with 400 kHz fast-mode I2C interface, 1 million write/erase cycle endurance, and 200-year minimum data retention. It is housed in a tiny SOT-23-5 package ideal for space-constrained designs. Available in stock with worldwide shipping.

Microchip dsPIC33EP512MU814-I/PH is a 16-bit DSC with 512KB Flash and 52KB RAM running up to 70 MHz. Integrates USB 2.0 OTG, CAN, and floating-point DSP engine in a 144-pin TQFP package. Ideal for high-performance motor control and industrial communications.