Microchip

Clock Buffer 2-Output HCSL PCIe Buffer With Hi Drive

Microchip MCP1661T-E/MNY is a current-mode PWM non-synchronous boost switching regulator with 2.4 V to 5.5 V input range and up to 32 V output in an 8-pin TDFN package, designed for battery-powered LED drivers, white LED backlights, and portable power conversion applications.

The 24LC65-I/P is a 64 Kbit I2C-compatible EEPROM from Microchip in an 8-pin DIP package, offering up to 100 kHz clock speed, 100,000 write/erase cycles, and data retention exceeding 200 years.

MCU,PIC 8-bit LCD Flash 128KB,XLP,USB V2 Microchip PIC18F97J94-I/PF, 8bit PIC Microcontroller, 64MHz, 128k B Flash, 100-Pin TQFP

MCP2561-E/P is a high-speed CAN transceiver IC by Microchip, supporting data rates up to 1 Mbps. It provides differential bus transmission and reception for CAN protocol, featuring low electromagnetic emission and high ESD protection. Ideal for automotive, industrial, and embedded network applications requiring robust serial communication.

150mA,5V,LDO Voltage Reg.,MIC5205-5.0BM5

DIP-18

8-bit Microcontrollers - MCU ATMEGA328PB IND TEMP T&R

EEPROM

Microchip 24LC65-I/SM is a 64-Kbit I2C serial EEPROM with 400 kHz clock support, 8-byte page write buffer, and 1,000,000 erase/write cycle endurance. Ideal for data logging and configuration storage in embedded systems. Available in SOIJ-8 package with industrial temperature range.

The Microchip 24LC65/SM is a 64 Kbit I2C Smart Serial EEPROM in an 8-pin SOIJ package. It supports up to 100 kHz clock frequency and offers 1,000,000 write/erase cycles with 200-year data retention. Ideal for embedded systems requiring non-volatile storage with simple two-wire serial interface.

8-bit PIC16F microcontroller running up to 32 MHz with 4096 words of Flash, 256 bytes RAM, ADC, and DAC in a 28-pin SPDIP package. Operates from as low as 2.3 V at 16 MHz for battery-friendly embedded designs. Available from stock with worldwide shipping.

PIC16F1704-I/SL is an 8-bit PIC microcontroller from Microchip running up to 32 MHz, featuring 4096 words of Flash program memory, integrated ADC, DAC, and multiple communication peripherals, housed in a compact 14-pin SOIC package ideal for cost-sensitive embedded applications.

The Microchip MCP2025-500E/SN is a LIN bus transceiver with 500 mA integrated voltage regulator in an SOIC-8 package. It provides physical-layer LIN 2.0 bus interfacing with fault protection and diagnostics. Designed for automotive body electronics, lighting control, and seat/mirror actuator nodes requiring a combined transceiver and power supply solution.

Microchip dsPIC33EV256GM104-I/ML is a 16-bit digital signal controller delivering 70 MIPS at 70 MHz with 256 KB Flash in a 44-pin QFN package, integrating a DSP engine, DMA, and ADC for high-performance motor control and power conversion applications.

PWM Boost Regulator, 36V, 5-Pin SOT-23 Microchip MCP1661T-E/OT, Switching Regulator Step Up 200mA, Adjustable, 32 (Max.) V, 575 kHz, 5-Pin SOT-23

The 24LC1026-I/P is a 1 Mbit I2C serial EEPROM from Microchip, operating at 400 kHz with 128-byte page writes, 1 million write cycles endurance, 200-year data retention, and 2.5V to 5.5V supply. Available in 8-pin PDIP package for industrial applications worldwide.

The 24FC1026-I/SN is a 1 Mbit I2C EEPROM from Microchip featuring 1.8V to 5.5V operation, 1 MHz clock speed, and 1,000,000 write/erase cycle endurance. It supports fast-mode I2C up to 1 MHz and stores data for a minimum of 200 years. Available in SOIC-8 package with worldwide shipping.

The MCP4462T-502E/ST is a quad-channel, 8-bit digital potentiometer from Microchip with a 5 kΩ end-to-end resistance per channel and non-volatile memory in a 14-pin TSSOP package. It uses a 2-wire I2C serial interface and provides 4 independent wiper channels for simultaneous gain or offset control in a single IC. Ideal for multi-channel audio, sensor calibration, and programmable power supply designs requiring persistent wiper settings.

0.300 INCH, LEAD FREE, PLASTIC, SDIP-28

PIC18F24K50-I/SP is an 8-bit PIC18F microcontroller from Microchip with 48 MHz maximum clock, 16 kB Flash memory, integrated ADC and DAC, in a 28-pin SPDIP package. It operates from as low as 2.3 V at 20 MHz, suiting battery-powered USB applications with its built-in USB engine. Available worldwide with factory lead time of approximately 6 weeks.

Microchip PIC18F2320-I/SP is an 8-bit PIC18 Flash microcontroller running at up to 40 MHz with 8 KB of reprogrammable Flash and an integrated 10-bit ADC. It operates from 2 V at 4 MHz for low-power modes up to 5.5 V at full speed. The 28-pin SPDIP package enables through-hole prototyping and ease of socketing.

DIP-40

Digital Signal Processors & Controllers - DSP, DSC 16 Bit 5V DSC 256KB ECC Flash, 16KB RAM

Microchip PIC16F57-I/SP is an 8-bit PIC microcontroller with 2048x12-word Flash memory running up to 20 MHz. It operates from a 2V minimum supply at 4 MHz and comes in a 28-pin SPDIP through-hole package. Suitable for cost-sensitive embedded control and prototyping applications worldwide.

MCU PIC32 128KB 32-Bit Flash 100Pin TQFP Microchip PIC32MX530F128L-I/PT, 32bit M4K, MIPS32 Microcontroller, 40MHz, 128 kB Flash, 100-Pin TQFP

Microchip PIC24FJ64GA002-I/SP is a 16-bit microcontroller with 64 KB Flash and 8 KB RAM running at up to 32 MHz. It integrates a 10-bit ADC, UART, SPI, I2C, and USB OTG peripherals in a 28-pin SPDIP through-hole package. Well suited for mid-range embedded control and data acquisition designs.

Microchip PIC24FJ64GB002-I/SP is a 16-bit PIC24 microcontroller with 64KB Flash, 8KB RAM, integrated USB, and ADC running at up to 32 MHz, housed in a 28-pin SPDIP through-hole package. It supports boundary scan debugging and is suited for USB-enabled embedded control applications requiring a breadboard-friendly DIP form factor.

Microchip MCP1825S-3302E/AB is a fixed 3.3 V LDO linear regulator delivering up to 500 mA output current with only 0.35 V maximum dropout voltage and 6 V maximum input, housed in a TO-220-3 package for low-noise power supply designs.

The Microchip MCP8026-115E/PT is a 3-phase brushless DC motor controller IC integrating gate drivers for six external power MOSFETs and a peak output drive current of 0.5 A. It provides hall-sensor commutation, overcurrent protection, and fault reporting in a 48-pin TQFP package. The device is RoHS-compliant and targets BLDC motor drives for appliances, fans, and industrial automation equipment.

MCP2021A-330E/SN is a LIN transceiver with integrated 3.3 V LDO regulator from Microchip, compliant with LIN 2.x and SAE J2602 standards, featuring up to 20 kbps data rate and packaged in an 8-pin SOIC for automotive body-control and sensor node applications.

MCP2021A-330E/MD is a fully integrated LIN transceiver with a built-in 3.3 V LDO voltage regulator from Microchip, combining bus interface and local power supply in a compact 8-lead DFN package for automotive and industrial network nodes.

The MCP2021A-500E/SN is a LIN bus transceiver with integrated voltage regulator from Microchip Technology, supporting SAE J2602 at up to 20 kBd data rate. It provides a single-channel LIN physical layer interface and onboard 5 V regulator in an 8-pin SOIC package, ideal for automotive body electronics and slave node designs.

Microchip MCP2021A-500E/MD is a LIN 2.x compatible transceiver integrated with a 5.0 V LDO voltage regulator in an 8-pin DFN package, providing a single-chip solution for automotive LIN slave nodes that require bus communication and local power supply from a 12 V vehicle rail.

MCP79510-I/MS is a real-time clock/calendar IC with SPI interface, 64-byte SRAM, and EEPROM, supporting 1.8V to 5.5V supply and clock frequencies up to 32 kHz for time-keeping applications.

The MCP2221A-I/ML is a USB 2.0 full-speed to I2C/UART protocol converter IC from Microchip. Housed in a compact 16-pin QFN package, it provides USB-to-I2C, USB-to-UART, and GPIO bridging at up to 12 MHz, and is ideal for embedded debug interfaces and USB-to-serial adapters.

8-bit Microcontrollers - MCU AVR 32K FL 2K SRAM 1KB EE 20 MHZ GRN

Microchip MCP2021AT-500E/SN is a single-channel LIN bus transceiver operating at up to 20 kbps with a 12 V nominal bus voltage and integrated slope control. It is packaged in an 8-pin SOIC and targets automotive body electronics, HVAC, and low-speed node communication in LIN 2.x networks.

The PIC16F677-I/ML is an 8-bit CMOS microcontroller featuring 14 KB Flash memory, up to 20 MHz operation, and nanoWatt Technology for ultra-low power consumption. It integrates a 10-bit ADC, comparators, and USART communication in a compact 20-pin QFN package. Ideal for cost-sensitive embedded control applications requiring low power and analog capabilities.

Microchip PIC18F26K22-E/ML is an 8-bit PIC18 nanoWatt XLP microcontroller with 64 KB Flash and 3968 B RAM, running up to 64 MHz. It integrates an ADC, operates down to 2.3 V at 16 MHz, and comes in a VQFN-28 lead-free package.

The MCP2561-E/SN is a high-speed CAN (Controller Area Network) transceiver IC from Microchip, supporting data rates up to 1 Mbps, housed in an 8-pin SOIC package. It provides the physical layer interface between a CAN controller and the differential bus, with robust protection features for automotive and industrial reliability. Suitable for automotive ECUs, industrial networks, and embedded motor control systems.

Microchip MCP8026T-115H/PT is a 3-phase brushless DC motor gate driver with 0.5A gate drive output current in a 48-pin TQFP package. It integrates comprehensive protection and control features for sensorless or sensored BLDC motor applications. Available from stock worldwide with global shipping.

The Microchip MCP45HV51T-104E/ST is a single-channel, 8-bit volatile digital potentiometer with a 100 kΩ end-to-end resistance, controlled via a 2-wire I2C-compatible serial interface. Housed in a TSSOP-14 package, it supports high-voltage operation and targets industrial, audio, and calibration applications requiring software-adjustable resistance.

DIP-40

LEAD FREE, SOT-223, 4 PIN

Microchip MCP45HV51T-503E/ST is an 8-bit volatile digital potentiometer with a 50 kΩ resistance and 2-wire serial (I2C) control interface. It supports resistor array values of 5 kΩ, 10 kΩ, and 50 kΩ in a 14-pin TSSOP package, suitable for programmable gain and calibration applications.

MICREL SEMICONDUCTOR - MIC5014YN - MOSFET DRIVER, HIGH/LOW SIDE, DIP-8

PIC24FV32KA301-I/SO is a 16-bit PIC24F microcontroller with 32 KB Flash, 32 MHz max clock, and XLP ultra-low power technology in a 20-pin SOIC package. Ideal for battery-powered and IoT embedded designs.

Microchip PIC16F1614-I/ST is an 8-bit MCU in TSSOP-14 package, offering 7KB Flash, 512B RAM, 10-bit ADC, DAC channels, and 32 MHz max clock. From $0.80 in stock, worldwide shipping.

I2C-Compatible (2-wire) Serial EEPROM