Microchip

Microchip MCP23S18-E/SP is a 16-bit SPI-interfaced I/O expander with two 8-bit GPIO ports, operating up to 10 MHz clock frequency. It features configurable interrupt outputs and programmable pull-ups on all 16 I/O lines, expanding microcontroller GPIO in embedded systems. Available in a 28-pin SPDIP package for through-hole prototyping and industrial applications.

Microchip MCP23016-I/SP is a 16-channel I2C I/O expander with two 8-bit ports, 400 kHz bus speed, interrupt output, and 2.7 V to 5.5 V supply in a 28-pin SPDIP package.

The MCP23S09-E/P is an 8-bit SPI I/O expander from Microchip providing 8 GPIO lines via a 10 MHz SPI interface. It operates from 1.8 V to 5.5 V and comes in an 18-pin DIP package, making it ideal for adding GPIO to space-limited or legacy-friendly microcontroller designs.

MCP1827-1202E/ET is a high-current fixed 1.2 V LDO linear regulator from Microchip capable of delivering 1.5 A output with only 0.33 V typical dropout voltage, accepting an input range of 2.3 V to 6 V in a 5-pin D2PAK package suited for board-level power supply designs.

MCP23009-E/SS is a clock IC by Microchip. Key specs include Clock Frequency-Max: 10 MHz; JESD-30 Code: R-PDSO-G20. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

MCP23018-E/SP is a 16-bit I/O expander from Microchip with I2C interface up to 10 MHz clock, providing two 8-bit GPIO ports in a 28-pin SPDIP package for expanding microcontroller I/O in embedded systems.

The MCP1826S-1802E/AB is a fixed 1.8 V, 1 A low-dropout linear voltage regulator with a typical dropout voltage of only 0.25 V, accepting input voltages from 2.3 V to 6 V and packaged in a TO-220-3 through-hole case. Its tight ±2% output accuracy and high current capability make it suitable for powering FPGAs, DSPs, and digital logic in embedded systems.

The MCP23009-E/MG is an 8-bit I/O expander from Microchip with I2C interface, supporting up to 10 MHz clock and 8 configurable I/O lines in a compact 16-pin QFN package. Features interrupt output and programmable pull-ups. In stock with worldwide shipping.

The MCP14E4-E/P is a dual 4 A peak MOSFET gate driver from Microchip with Schmitt trigger inputs and non-inverting/inverting outputs for flexible gate-drive topology. It operates from a 4.5 V to 18 V supply in an 8-pin PDIP package, suitable for through-hole switching power supply and motor-drive designs.

Microchip MCP23009-E/P is an 8-bit I/O port expander with I2C interface in an 18-pin PDIP package. It provides 8 independently configurable GPIO lines with interrupt-on-change and internal pull-ups operating up to 10 MHz clock. Extends microcontroller I/O capacity with minimal wiring overhead.

Microchip MCP1316MT-29ME/OT is a single-channel voltage supervisor with a 2.9 V reset threshold, watchdog timer, and reset input in a 5-pin SOT-23 package. It monitors supply rails with 0.174 V maximum threshold accuracy and provides reliable power-on reset and system watchdog for embedded microcontroller designs.

MCP1826S-3002E/AB is a voltage regulator by Microchip. Key specs include Dropout Voltage1-Max: 0.4 V; Dropout Voltage1-Nom: 0.25 V. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

MCP1804T-3002I/MB is a fixed 3 V, 150 mA LDO voltage regulator from Microchip supporting input voltages up to 28 V with a nominal dropout of 1.3 V. Packaged in a 3-pin SOT-89 for better thermal dissipation, it delivers ±2% accuracy and targets industrial and automotive supply rails requiring wide input range regulation.

The Microchip MCP1541-I/TO is a three-terminal series voltage reference producing a precise 4.096 V output with 1% initial accuracy in a TO-92-3 package. It operates up to a 7 V maximum input supply, making it compatible with 5 V systems needing a stable ADC reference. Ideal for 12-bit ADC calibration, data acquisition systems, and portable precision measurement instruments.

The MCP1827-ADJE/AT is an adjustable low-dropout (LDO) linear regulator from Microchip with a typical dropout voltage of 330 mV and up to 1.5 A output current. It features 0.16 %/V line regulation in a 5-pin TO-220-5 through-hole package suitable for benchtop power supplies and high-current regulated rail designs.

The MCP1725-3002E/SN is a 500 mA low-dropout LDO voltage regulator from Microchip that delivers a fixed 3.0 V output with ±2% accuracy from a 2.3 V to 6 V input. With a nominal dropout voltage of only 210 mV and a low quiescent current, it provides efficient and stable power regulation in an 8-pin SOIC package for portable and battery-operated systems.

QFN-72

MCP1826S-1202E/DB is a voltage regulator by Microchip. Key specs include Dropout Voltage1-Max: 0.4 V; Dropout Voltage1-Nom: 0.25 V. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

Microchip PIC32MM0064GPL020-I/SS is a 32-bit PIC32 microcontroller with 64 KB Flash, 25 MHz maximum clock, integrated ADC, and boundary scan in a compact 20-pin SSOP package for low-pin-count applications.

MCP1726-ADJE/MF is a voltage regulator by Microchip. Key specs include Dropout Voltage1-Max: 0.5 V; Dropout Voltage1-Nom: 0.22 V. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

Microchip MCP16322T-ADJE/NG is a current-mode synchronous step-down DC-DC converter delivering up to 2 A with an adjustable output voltage of 0.9 V to 5 V from a 6 V to 24 V input. It supports both PWM and PFM control modes and is housed in a compact 16-pin QFN package for dense PCB layouts. Well-suited for industrial, automotive, and embedded system power supply designs.

The Microchip MCP130T-460I/TT is a single-channel voltage supervisor and reset IC with a fixed threshold of 4.35 V to 4.6 V in a miniature SOT-23-3 package. It asserts a reset signal when the monitored supply drops below the threshold, protecting microcontrollers from brownout conditions. Ideal for 5 V system supervisors in consumer electronics, industrial controllers, and embedded computing boards.

Microchip MCP1826-1802E/AT is a fixed 1.8 V LDO linear voltage regulator capable of delivering up to 1000 mA output current from a 2.3 V to 6 V input in a 5-pin TO-220 package. Its low dropout voltage of 0.25 V typical makes it efficient for powering digital and mixed-signal circuits from Li-Ion and USB supply rails.

MCP100T-300I/TT is an integrated circuit by Microchip. Key specs include JESD-30 Code: R-PDSO-G3; JESD-609 Code: e3. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

Microchip 24C65-I/P is a 64-Kbit I2C serial EEPROM with 400 kHz fast-mode interface, 4.5 V to 6 V supply, and 1 million write cycle endurance in an 8-pin PDIP package. Available in stock with worldwide shipping.

Microchip MCP1703T-3002E/MB is a fixed 3 V LDO voltage regulator delivering up to 250 mA output current. It accepts a wide 2.7 V to 16 V input range with a maximum dropout voltage of 0.975 V. The compact SOT-89-3 package suits portable and battery-powered embedded power supply designs.

DIP-8

Microchip, MCP16312-E/MS Step-Down Switching Regulator 1A Adjustable, 2 → 24 V, 8-Pin MSOP

Microchip MCP1632-BAE/MS is a 600 kHz PWM switching controller with combined current and voltage-mode control, adjustable soft start, and 3V to 5.5V input voltage range. It is housed in a compact 8-pin MSOP package for space-constrained DC-DC converter designs. Ideal for LED drivers, battery chargers, and low-voltage boost or buck converter applications.

Use the download button to access the MCP14E7-E/P schematic symbol, PCB footprint, and 3D model.

Use the download button to access the MCP1623T-I/CHY schematic symbol, PCB footprint, and 3D model.

Microchip MCP1525-I/TO is a 2.5V precision three-terminal voltage reference in a TO-92-3 package. It delivers a 2.5V output with tight initial accuracy and low temperature coefficient, making it ideal for ADC references and precision analog circuitry in cost-sensitive industrial and consumer applications.

Ethernet ICs 10/100 BASE-TX Physical Layer Transceiver

dsPIC33FJ09GS302-I/SS is a microcontroller by Microchip. Key specs include Bit Size: 16; Clock Frequency-Max: 40 MHz. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

GREEN, TO-92, 3 PIN

MCP1256-E/UN is a regulated charge pump DC/DC converter from Microchip delivering a fixed 3.3 V output at up to 100 mA with a 650 kHz switching frequency, accepting 1.8 V to 3.6 V input, housed in a 10-pin MSOP package for portable and battery-powered designs.

Microchip MCP14E10-E/SN is a dual MOSFET gate driver with Schmitt trigger inputs and totem-pole outputs in an 8-pin SOIC package. It provides high-side and low-side drive capability for power switching stages, half-bridge, and bootstrap gate-drive circuits. The device delivers fast switching performance and is suited for DC-DC converters, motor drives, and synchronous rectification designs.

Microchip MCP130-315DI/TO is a single-channel voltage supervisor IC in a 3-pin TO-92 package. It monitors supply rails with a 3.15 V reset threshold and provides active-low reset output. Available with 14-week lead time and worldwide shipping.

Microchip MCP111T-270E/TT, Voltage Supervisor 2.564 → 2.696 V, 3-Pin SOT-23B

Microchip MCP130T-450I/TT is a single-channel voltage supervisor and microprocessor reset IC with a 4.50 V fixed trip threshold, active-low reset output, and SOT-23-3 package, offering reliable power monitoring for microcontrollers and logic circuits across -40°C to +125°C industrial temperature range.

MCP1316T-46LE/OT is an integrated circuit by Microchip. Key specs include JESD-30 Code: R-PDSO-G5; JESD-609 Code: e3. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

Use the download button to access the MCP14700-E/MF schematic symbol, PCB footprint, and 3D model.

The Microchip MCP131T-300E/TT is a single-channel voltage supervisor and microprocessor reset IC that monitors a 3.0 V rail with a trip threshold between 2.857 V and 3.003 V. It asserts a reset output to hold a processor in a safe state during power-up and brownout conditions, housed in a minimal 3-pin SOT-23 package.

The MCP131T-450E/TT is a single-channel voltage supervisor and microcontroller reset IC from Microchip, monitoring a fixed threshold window of 4.271 V to 4.49 V to assert a reset signal during undervoltage conditions. Packaged in a 3-pin SOT-23B, it is RoHS-compliant and suited for power supply monitoring in 5 V embedded systems.

Microchip MCP130T-315I/TT is a single-channel voltage supervisor and microprocessor reset IC with a 3.15 V trip threshold. It asserts an active-low reset output when the supply falls below 3 V, protecting system integrity. Housed in a space-saving 3-pin SOT-23 package, it suits microcontroller-based systems, embedded modules, and battery-powered industrial equipment.

Microchip MCP112T-315E/LB is a single-channel voltage supervisor that monitors a 3.15 V threshold window of 3.003 V to 3.157 V and asserts a reset when the supply falls below the trip point. In a 3-pin SC-70 package, it provides reliable microcontroller reset and brown-out protection in battery-powered and 3.3 V rail systems.

Microchip LAN9115-MT, Ethernet Controller 10/100 Mbits/s MII, 3.3 V, 100-Pin TQFP

The MCP121-450E/TO is a single-channel voltage supervisor and reset IC with a fixed 4.50 V trip threshold, asserting a reset output when supply voltage drops below the threshold. It is housed in a 3-pin TO-92 package for reliable MCU and processor power monitoring.

MCP112T-270E/TT is an integrated circuit by Microchip. Key specs include JESD-30 Code: R-PDSO-G3; JESD-609 Code: e3. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

Microchip MCP121T-240E/TT is a single-channel voltage supervisor monitoring a fixed threshold of 2.262 V to 2.378 V with an active-low reset output in a 3-pin SOT-23 package. It provides a power-on reset signal to microcontrollers when supply voltage falls below the trip threshold. The device is RoHS-compliant and suits compact battery-powered, IoT sensor, and MCU power monitoring designs.