MCP1827-ADJE/AT Microchip Integrated Circuit (Other) In Stock

The MCP1827-ADJE/AT is an adjustable low-dropout (LDO) linear regulator from Microchip with a typical dropout voltage of 330 mV and up to 1.5 A output current. It features 0.16 %/V line regulation in a 5-pin TO-220-5 through-hole package suitable for benchtop power supplies and high-current regulated rail designs.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
MCP1827-ADJE/ATOther
Quick Facts
Manufacturer
Microchip
Package
Other
Pin Count
5
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $1.1800(MOQ 1)
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • Adjustable output voltage set by external resistor divider covering a wide output range
  • Low dropout voltage of 330 mV typical (600 mV maximum) at full 1.5 A load current
  • Excellent line regulation of 0.16 %/V maximum for stable output under varying input conditions
  • 5-pin TO-220-5 through-hole package with exposed tab enabling bolt-to-heatsink thermal management
  • Pb-free and RoHS compliant with JESD-609 e3 lead-free code
  • Factory lead time of approximately 7 weeks supporting manageable production scheduling

Applications

The MCP1827-ADJE/AT is used in adjustable bench power supplies, laboratory test equipment, and post-regulation stages following switching converters where low noise and low dropout are required at output currents up to 1.5 A. Its TO-220-5 package and heatsink capability make it a practical choice for linear post-regulators in audio amplifiers, RF bias circuits, and industrial equipment needing a quiet, ripple-free supply rail.

Specifications

Pbfree CodeYes
Manufacturer Package CodeTO-220-5
Factory Lead Time7Weeks
YTEOL9
AdjustabilityADJUSTABLE
Dropout Voltage1-Max0.6V
Dropout Voltage1-Nom0.33V
JESD-30 CodeR-PSFM-T5
JESD-609 Codee3
Line Regulation-Max (%/V)0.16
Load Regulation-Max(%)1%
Number of Functions1
Number of Outputs1
Operating Temperature TJ-Max125°C
Operating Temperature TJ-Min-40 °C
Output Current1-Max1.5A
Output Voltage1-Max5V
Output Voltage1-Min0.8V
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeSIP5,.1,67TB
Package ShapeRECTANGULAR
Package StyleFLANGE MOUNT
Packing MethodTUBE
Qualification StatusNot Qualified
Regulator TypeADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR
Surface MountNO
TechnologyCMOS
Terminal FinishMatte Tin (Sn)
Terminal FormTHROUGH-HOLE
Terminal Pitch1.7mm
Terminal PositionSINGLE
PackageOther

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8542.39.00.01
Country of OriginMainland China

Datasheet

MCP1827-ADJE/AT Datasheet Download

Official datasheet from Microchip

Alternate & Equivalent Parts

Compatible alternatives and drop-in replacements for MCP1827-ADJE/AT:

Frequently Asked Questions

What is the maximum output current and dropout voltage of MCP1827-ADJE/AT at full load?

MCP1827-ADJE/AT delivers up to 1.5 A continuous output current with a maximum dropout voltage of 600 mV and a typical dropout of only 330 mV, ensuring regulation is maintained when input voltage is as little as 330 mV above the desired output, reducing heat dissipation versus higher-dropout regulators.

How is the output voltage adjusted on MCP1827-ADJE/AT and what resistor values are typical for a 5 V output?

Output voltage is set by a two-resistor divider connected between the output, the ADJ pin, and ground; for a 5 V output from a nominal 1.22 V reference, choosing a lower resistor of 100 Ω and an upper resistor of approximately 310 Ω achieves the target, with 1% tolerance resistors keeping error under 1% across the 1.5 A output range.

When is MCP1827-ADJE/AT preferred over a switching regulator in a noise-sensitive circuit?

Linear regulators like MCP1827-ADJE/AT produce no switching noise, making them ideal as post-regulators in RF front-ends, ADC reference supplies, and audio circuits where switching frequencies in the range of 100 kHz to 2 MHz would introduce interference; the 330 mV typical dropout also limits thermal dissipation when the input-output differential is kept small.

What thermal management does the TO-220-5 package allow for MCP1827-ADJE/AT in high-power applications?

The TO-220-5 package includes an exposed metal tab that can be bolted directly to a heatsink; with a standard aluminum heatsink of 10 °C/W thermal resistance, the device can dissipate several watts continuously, sustaining 1.5 A output current across a wide range of input-output voltage differentials without exceeding the 125°C junction temperature limit.

Does MCP1827-ADJE/AT comply with RoHS lead-free requirements for modern PCB assembly?

Yes, MCP1827-ADJE/AT carries the JESD-609 e3 lead-free code and Pb-free designation, confirming RoHS compliance for halogen-reduced lead-free PCB assembly; the factory lead time of approximately 7 weeks is also shorter than many comparable high-current LDO alternatives.

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Microchip

Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $1.1800
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$1.7500$1.75
10+$1.5700$15.70
25+$1.4800$37.00
100+$1.3100$131.00
1000+$1.2900$1290.00
5000+$1.1800$5900.00
pcs
Unit price: $1.7500 · Total: $1.75

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.

SK
Sarah Kim
VP Engineering, NovaBit Electronics, South Korea