MCP1725-3002E/SN Microchip Power Supply (Small Outline Packages) In Stock

The MCP1725-3002E/SN is a 500 mA low-dropout LDO voltage regulator from Microchip that delivers a fixed 3.0 V output with ±2% accuracy from a 2.3 V to 6 V input. With a nominal dropout voltage of only 210 mV and a low quiescent current, it provides efficient and stable power regulation in an 8-pin SOIC package for portable and battery-operated systems.

ACTIVEPower SupplyVerified May 2026
Package / Visual Reference
MCP1725-3002E/SNSmall Outline Packages
Quick Facts
Manufacturer
Microchip
Package
Small Outline Packages
Pin Count
8
Lifecycle
ACTIVE
Category
Power Supply
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • 500 mA output current with 210 mV nominal dropout voltage
  • Fixed 3.0 V output with ±2% accuracy over temperature
  • Wide input range: 2.3 V to 6 V for battery and regulated-supply compatibility
  • Low quiescent current for improved battery life in standby operation
  • 8-pin SOIC-8 package with enable pin for power-sequencing control
  • Output capacitor flexibility — stable with small ceramic capacitors

Applications

The MCP1725-3002E/SN is commonly used to power microcontrollers, wireless modules, and sensors in portable devices and IoT nodes that are supplied from a single-cell Li-ion or 4-cell AA battery pack. Its low 210 mV dropout enables regulation to remain active even when the battery voltage approaches 3.2 V, extending usable battery run time compared to regulators with higher dropout voltages.

Specifications

Pbfree CodeYes
Manufacturer Package CodeSOIC-8
Factory Lead Time6Weeks
YTEOL9
AdjustabilityFIXED
Dropout Voltage1-Max0.35V
Dropout Voltage1-Nom0.21V
Input Voltage Absolute-Max6.5V
Input Voltage-Max6V
Input Voltage-Min3.425V
JESD-30 CodeR-PDSO-G8
JESD-609 Codee3
Line Regulation-Max0.01236%
Load Regulation-Max0.03%
Number of Functions1
Number of Outputs1
Operating Temperature TJ-Max125°C
Operating Temperature TJ-Min-40 °C
Output Current1-Max0.5A
Output Voltage1-Max3.075V
Output Voltage1-Min2.925V
Output Voltage1-Nom3V
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeSOP8,.25
Package ShapeRECTANGULAR
Package StyleSMALL OUTLINE
Packing MethodTUBE
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
Regulator TypeFIXED POSITIVE SINGLE OUTPUT LDO REGULATOR
Screening LevelTS 16949
Surface MountYES
TechnologyCMOS
Terminal FinishMatte Tin (Sn)
Terminal FormGULL WING
Terminal Pitch1.27mm
Terminal PositionDUAL
Voltage Tolerance-Max2%
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCNEAR99
HTS Code8542.39.00.01
Country of OriginThailand

Datasheet

MCP1725-3002E/SN Datasheet Download

Official datasheet from Microchip

Alternate & Equivalent Parts

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What is the minimum input voltage at which the MCP1725-3002E/SN can still maintain a 3.0 V output?

The MCP1725-3002E/SN has a nominal dropout voltage of 210 mV at full load, so a 3.0 V output requires at least approximately 3.21 V on the input. Under lighter loads the dropout is lower, so in partial-load conditions the regulator can maintain regulation with an input of around 3.15 V or less.

How does the MCP1725-3002E/SN compare to a standard LDO with 1 V dropout for powering an MCU from a Li-ion battery?

A standard LDO with 1 V dropout would stop regulating when a 3.7 V nominal Li-ion cell discharges below 4.0 V, cutting off usable capacity. The MCP1725-3002E/SN needs only 210 mV of headroom, allowing the MCU to remain powered until the battery reaches approximately 3.21 V — recovering 20–30% more runtime on the same cell.

What output capacitor types are compatible with the MCP1725-3002E/SN for stable LDO operation?

The MCP1725-3002E/SN is stable with standard ceramic output capacitors of 1 µF to 10 µF, which are low-cost and compact for PCB layouts. Unlike older PMOS LDOs that required tantalum capacitors with specific ESR values, the MCP1725 design tolerates low-ESR ceramics, simplifying BOM selection and reducing component cost.

Is the MCP1725-3002E/SN RoHS compliant, and what package soldering process does it support?

Yes, the MCP1725-3002E/SN is Pb-free and RoHS compliant with a JESD-609 e3 code, indicating MSL 3 moisture sensitivity. It supports standard lead-free SMT reflow soldering in the 8-pin SOIC-8 package, and its footprint is interchangeable with other regulators in the SOIC-8 outline for second-source flexibility.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Microchip

Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
Contact for Price
Buy from 1pc · Factory-direct pricing
pcs

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.

SK
Sarah Kim
VP Engineering, NovaBit Electronics, South Korea