Microchip

MCP6021-E/P is a rail-to-rail input and output operational amplifier from Microchip with 10 MHz gain-bandwidth product, 2.5 V to 5.5 V single-supply operation, and a 90 dB typical CMRR, packaged in an 8-pin PDIP for prototyping and industrial signal-conditioning circuits.

MCP4461-103E/ML is an interface IC by Microchip. Key specs include Bandwidth-Nom: 1 kHz; Control Interface: 2-WIRE SERIAL. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

The MCP4912-E/SL is a dual-channel 10-bit SPI digital-to-analog converter from Microchip with a maximum output voltage of 5.5 V. It features a serial SPI interface and operates in a SOIC-14 package, making it suitable for precision analog signal generation in industrial, audio, and instrumentation applications.

MCP6001T-I/LT is an operational amplifier by Microchip. Key specs include Common-mode Reject Ratio-Min: 60 dB; Common-mode Reject Ratio-Nom: 76 dB. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

Microchip MCP6002-E/P is a dual rail-to-rail input/output operational amplifier with 1 MHz gain-bandwidth product and 600 mV/µs slew rate, operating from 1.8 V to 6 V. It features 60 dB minimum CMRR and 4500 µV maximum offset voltage. Available in an 8-pin DIP package, suitable for low-voltage analog signal conditioning.

The MCP4921-E/MS is a 12-bit single-channel SPI digital-to-analog converter from Microchip with an output voltage range up to 4.096 V. Packaged in an 8-pin MSOP, it features a serial input interface and suits precision signal generation, calibration references, and analog control applications.

0.300 INCH, LEAD FREE, PLASTIC, DIP-8

MCP4922-E/ST is a dual-channel 12-bit digital-to-analog converter from Microchip with SPI-compatible serial interface and up to 5.5 V analog output voltage. It provides two independent DAC outputs in a 14-pin TSSOP package for compact designs. Suitable for industrial control, audio, and precision voltage generation applications.

0.150 INCH, LEAD FREE, PLASTIC, MS-012, SOIC-8

The MCP4162-503E/P is a single-channel 50 kΩ digital potentiometer with 257 wiper positions and SPI serial interface. It features non-volatile memory to retain wiper position across power cycles and operates from a 1.8 V to 5.5 V supply. Supplied in an 8-pin PDIP package for through-hole assembly.

Microchip MCP4241-104E/P is a dual-channel 100 kΩ digital potentiometer with 129 wiper positions and non-volatile memory, featuring an SPI-compatible serial interface in an 8-pin PDIP package. It supports 2.7 V to 5.5 V operation and is suited for precision calibration, gain control, and voltage adjustment circuits.

The MCP4461-104E/ML is a quad-channel, 100 kΩ digital potentiometer with 257 positions per channel, non-volatile memory for wiper setting retention, and an I2C 2-wire serial interface in a 20-pin QFN package. Available from stock with worldwide shipping.

Microchip MCP4801-E/MS is an 8-bit digital-to-analog converter with SPI-compatible serial interface and a maximum analog output voltage of 4.176 V. It features binary input encoding, a compact MSOP-8 package, and RoHS-compliant lead-free construction for modern embedded and instrumentation designs.

The MCP4652-104E/UN is a dual-channel, 100 kΩ I2C digital potentiometer with 257 positions for precise resistance adjustment under software control. It features non-volatile wiper storage and operates from 1.8 V to 5.5 V in a compact 10-pin MSOP package. Available from stock worldwide with fast shipping.

MCP4241-503E/P is a dual-channel 50 kΩ digital potentiometer from Microchip with 129 wiper positions, SPI increment/decrement interface, non-volatile EEPROM storage, and a 14-pin DIP package for through-hole analog control applications.

MCP4462-104E/ST is a quad-channel, non-volatile digital potentiometer with 257 positions and 100kΩ resistance, controlled via 2-wire I2C interface. Housed in a 14-pin TSSOP package, it offers 0.1 kHz bandwidth and supports ±5V operation. Available from stock with worldwide shipping.

Microchip MCP4661T-103E/ML is a dual-channel 10 kΩ digital potentiometer with non-volatile memory and I2C interface in a compact VQFN-16 package. It offers 256 wiper positions per channel controlled via increment/decrement commands. Suitable for audio level control, calibration, and programmable gain amplifier designs in consumer and industrial applications.

Microchip MCP4641T-502E/ML is a dual-channel 5 kΩ digital potentiometer with 129 wiper positions and non-volatile memory, controlled via I2C interface. It operates from 2.7 V to 5.5 V and is housed in a compact 16-pin QFN package for precise resistance control in calibration and signal conditioning circuits.

The Microchip MCP1725-3302E/MC is a fixed 3.3 V, 500 mA low-dropout linear regulator with a typical dropout voltage of only 210 mV, accepting input voltages from 2.3 V to 6 V. Featuring ±2% output accuracy and housed in a compact 8-pin DFN package, it suits battery-powered and low-headroom 3.3 V power supply designs.

Microchip 24LC01B/SN Serial EEPROM Memory, 1kbit, 900ns, 2.5 → 5.5 V 8-Pin SOIC

Microchip MCP4162-103E/P is a single-channel 10 kΩ digital potentiometer with 257 wiper positions, SPI increment/decrement interface, and non-volatile wiper memory in an 8-pin PDIP package, providing precise software-controlled resistance adjustment for gain tuning, offset calibration, and audio level control applications.

MCP4461-103E/ST is an interface IC by Microchip. Key specs include Bandwidth-Nom: 1 kHz; Control Interface: 2-WIRE SERIAL. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

The MCP121T-450E/TT is a single-channel voltage supervisor and microprocessor reset IC from Microchip, with a fixed threshold window of 4.271 V to 4.49 V, housed in a compact 3-pin SOT-23 package. It monitors supply voltage and asserts a reset signal when the voltage falls below the threshold, ensuring reliable processor startup. Ideal for 5 V microcontroller systems, embedded controllers, and consumer electronics requiring robust power-on reset and brownout detection.

MCP4441-103E/ST is an interface IC by Microchip. Key specs include Bandwidth-Nom: 1 kHz; Control Interface: 2-WIRE SERIAL. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

MCP4261-103E/ST is a dual-channel digital potentiometer from Microchip with 10 kΩ end-to-end resistance and 257 wiper positions per channel. The SPI-compatible serial interface provides precise digital resistance control in a 14-pin TSSOP package for compact audio and signal-conditioning designs.

MCP4261-103E/P is an interface IC by Microchip. Key specs include Bandwidth-Nom: 1 kHz; JESD-30 Code: R-PDIP-T14. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

Microchip MCP4251-502E/P is a dual-channel 5 kΩ digital potentiometer with 257 linear wiper positions per channel, controlled via SPI increment/decrement interface in a 14-pin PDIP package. It provides non-volatile wiper memory, making it ideal for programmable gain, trim, and calibration circuits in industrial and consumer electronics.

Microchip MCP4141-104E/P is a single-channel SPI digital potentiometer with 100 kΩ end-to-end resistance and 129 linear wiper positions, controlled via an increment/decrement SPI interface. Housed in an 8-pin PDIP package, it replaces mechanical trimmers in gain adjustment and calibration circuits.

ARM Microcontrollers - MCU 48TQFP,85C TEMP, GREEN, 5V, 48MHZ, T&R

Microchip MCP4251-104E/P is a dual-channel 100 kΩ digital potentiometer with 257 linear positions controlled via SPI. It uses increment/decrement commands, supports volatile and non-volatile wiper storage, and comes in an 8-pin PDIP package for prototyping and embedded gain-control designs.

MCP4231-103E/P is a dual-channel 10 kΩ digital potentiometer from Microchip with SPI increment/decrement control, 128 wiper positions, and 1 kHz bandwidth in a 14-pin DIP package for through-hole prototyping and audio adjustment applications.

MCP42010-I/SL is a dual-channel 10 kΩ digital potentiometer IC from Microchip with 256 wiper positions, SPI-compatible 3-wire serial interface, and 2.7 V to 5.5 V single-supply operation, housed in a 14-pin SOIC for programmable gain, offset, and calibration applications.

The MCP41HV51-503E/ST is a single-channel, 50kΩ, 256-position SPI digital potentiometer from Microchip in a 14-pin TSSOP package. It supports high-voltage operation and provides precise programmable resistance control via a 3-wire SPI interface. Available from stock worldwide with competitive pricing.

MCP41HV51-502E/ST is a single-channel high-voltage digital potentiometer from Microchip with 5 kΩ end-to-end resistance, 256-position resolution, and 3-wire SPI control interface in a 14-pin TSSOP package, designed for programmable gain and biasing in industrial and audio circuits.

The MCP4142-103E/P is a single-channel 10 kΩ digital potentiometer from Microchip with 129 wiper positions, controlled via an SPI increment/decrement interface and housed in an 8-pin PDIP package. It provides non-volatile position storage so the wiper setting is retained through power cycles.

The MCP4162-104E/P is a single-channel, 8-bit digital potentiometer from Microchip with a 100 kΩ end-to-end resistance and 257 wiper positions, controlled via SPI increment/decrement commands, housed in an 8-pin PDIP package suitable for audio, calibration, and gain-adjustment circuits.

Microchip MCP41HV51-103E/ST is a single-channel digital potentiometer with 10 kΩ end-to-end resistance and 256 wiper positions. It uses a 3-wire SPI interface and comes in a 14-pin TSSOP package for compact designs. Available from stock with worldwide shipping.

MCP4161-502E/P is a single-channel 5 kΩ digital potentiometer from Microchip with 257-position linear taper and SPI increment/decrement interface, featuring 2 kHz nominal bandwidth in a through-hole PDIP-8 package with worldwide shipping.

Microchip MCP4132-103E/P is a single-channel digital potentiometer featuring 10 kΩ end-to-end resistance with 129-position linear taper and SPI-compatible serial interface. It offers a nominal bandwidth of 1 kHz, comes in an 8-pin PDIP package, and is RoHS-compliant for prototyping and production designs.

MCP4161-502E/MF, Digital Potentiometer 5kΩ 257-Position Serial-SPI 8-Pin DFN

The MCP41100-I/SN is a single-channel 100 kΩ digital potentiometer from Microchip with 256 resistor taps controlled via a 3-wire SPI interface. It provides programmable resistance adjustment in an 8-pin SOIC package for gain control, offset trimming, and tunable filter designs.

Microchip MCP41050-I/P is a single-channel SPI-controlled digital potentiometer with 50 kΩ end-to-end resistance and 256 linear positions. It operates from 2.7 V to 5.5 V in an 8-pin PDIP package and supports an optional hardware shutdown pin, making it straightforward to integrate into microcontroller-based analog control and calibration designs.

Microchip MCP4151-503E/P is a single-channel 50 kΩ digital potentiometer with 257 wiper positions and a linear taper, controlled via an SPI-compatible increment/decrement interface in an 8-pin PDIP package. It replaces mechanical potentiometers in automated calibration, gain adjustment, and LCD bias tuning circuits. The device is RoHS-compliant and available in a through-hole DIP footprint for easy prototyping.

Microchip MCP4161-103E/P is a single-channel 10 kΩ digital potentiometer with 257 positions and SPI increment/decrement control interface in an 8-pin PDIP package. It provides linear resistance adjustment with 1 kHz nominal bandwidth for audio and analog control circuits. Available RoHS-compliant with Pb-free construction for straightforward prototyping and breadboard use.

MCP4152-502E/P is an interface IC by Microchip. Key specs include Bandwidth-Nom: 2 kHz; JESD-30 Code: R-PDIP-T8. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

Microchip MCP4152-103E/P is a single-channel volatile digital potentiometer with 10 kΩ nominal resistance and 257 wiper positions controlled via an increment/decrement SPI interface. It operates from 1.8 V to 5.5 V and is housed in an 8-pin PDIP package. Used for programmable gain, volume control, and sensor calibration circuits.

MCP4024T-502E/OT is a non-volatile single-channel digital potentiometer from Microchip with 5 kΩ resistance, 64-position linear taper, 2-wire increment/decrement interface, and 2 kHz bandwidth in a miniature SOT-23-5 package, designed for compact calibration and trimming circuits.

Microchip MCP40D17T-104E/LT is a single-channel I2C digital potentiometer with 100 kΩ end-to-end resistance and 128 linear wiper positions. Housed in a 6-pin SC-70 package, it enables software-controlled resistance adjustment in compact analog control and calibration circuits.

The MCP4141-103E/P is a single-channel, 129-position, 10 kΩ non-volatile digital potentiometer controlled via SPI increment/decrement interface, with 1 kHz nominal bandwidth, housed in an 8-pin PDIP package for simple programmable resistance applications.

The MCP4141-103E/SN is a 7-bit single-channel digital potentiometer from Microchip with a 10 kΩ end-to-end resistance, controlled via an SPI-compatible increment/decrement interface. It offers non-volatile wiper position storage and operates from a wide supply range in an 8-pin SOIC package, suitable for programmable gain, offset, and calibration circuits.