Microchip

MCP4013T-202E/CH is a single-channel digital potentiometer from Microchip with 2.1 kΩ end-to-end resistance and 64-position linear taper. It uses an increment/decrement 2-wire serial interface and comes in a compact 6-pin SOT-23 package for easy PCB integration. Ideal for audio, gain, and calibration adjustment circuits.

MCP4019T-104E/LT is a single-channel 100 kΩ digital potentiometer with 128-step linear taper and I2C 2-wire interface, housed in a compact SC-70 5-pin package. It operates from 1.8 V to 5.5 V supply and draws only 1 µA typical quiescent current. Available from stock with worldwide shipping.

MCP4013T-502E/CH is a single-channel digital potentiometer from Microchip with a 5 kΩ resistance and 64-position linear taper. It uses a 2-wire increment/decrement serial interface and is housed in a compact SOT-23-6 package, making it ideal for portable and space-constrained analog adjustment applications.

Microchip MCP4012T-503E/CH is a single-channel digital potentiometer with 50 kΩ end-to-end resistance and 64-position linear taper. It features an increment/decrement 2-wire serial interface, operates in a compact 6-pin SOT-23 package, and is RoHS-compliant lead-free for modern electronic designs.

PIC24FJ1024GA610-I/BG is a microcontroller by Microchip. Key specs include Address Bus Width: 24; Bit Size: 16. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

The MCP4012T-202E/CH is a single-channel digital potentiometer from Microchip with a 2.1 kΩ end-to-end resistance and 64 linear positions, controlled via a 2-wire increment/decrement serial interface. Packaged in a compact 6-pin SOT-23, it is RoHS-compliant and suited for digitally-adjustable gain, offset, and calibration circuits.

The MCP3551-E/MS is a 22-bit delta-sigma ADC from Microchip featuring a differential input range of ±2.5 V, SPI-compatible serial interface, and a maximum conversion time of approximately 73.5 ms for high-resolution single-channel measurements. It is housed in a compact 8-pin MSOP package for space-constrained precision applications. Available from stock with worldwide shipping.

Microchip MCP130T-300I/TT is a single-channel voltage supervisor and reset IC with a 3.0 V trip threshold for monitoring 3.3 V power rails. It asserts an active-low reset output to hold microcontrollers in reset during brownout and power-down events. Packaged in a 3-pin SOT-23, it suits IoT devices, embedded modules, and industrial equipment requiring minimal board space.

The MCP4012T-103E/CH is a single-channel 10 kΩ digital potentiometer with 64 positions and linear taper from Microchip Technology. It uses a 2-wire increment/decrement serial interface and comes in a compact 6-pin SOT-23 package, ideal for voltage adjustment and signal conditioning in portable designs.

MCP4011-502E/SN is a single-channel 5 kΩ digital potentiometer from Microchip with an Up/Down SPI-compatible increment/decrement interface, 64 wiper positions, and 2 kHz bandwidth in an 8-pin SOIC package.

Microchip MCP3202T-CI/SN is a 12-bit successive approximation ADC with differential input and SPI-compatible serial interface. It features a maximum conversion time of 6.66 µs and operates from 2.7 V to 5.5 V supply in an 8-pin SOIC package, ideal for precision analog measurement applications.

Use the download button to access the MCP4011T-202E/MC schematic symbol, PCB footprint, and 3D model.

Microchip MCP4011-103E/SN is a single-channel 10 kΩ digital potentiometer with 64-step resolution, increment/decrement control interface, and 1.8 V to 5.5 V supply operation in an 8-pin SOIC package.

Microchip 24FC256-I/P is a 256 Kbit I2C serial EEPROM with 1 MHz bus speed, 1 million write/erase cycle endurance, 200-year data retention, and 8-pin DIP package, offering non-volatile storage for industrial and consumer embedded systems.

Microchip MCP39F511-E/MQ is a highly integrated single-phase power monitoring IC featuring 10-bit ADC resolution and dual-channel energy measurement. It operates from 2.7 V to 3.6 V supply, supports adjustable thresholds, and comes in a compact 28-pin QFN package for space-constrained designs.

MCP39F501-E/MQ is a 2-channel voltage supervisor and reset IC from Microchip in a 28-pin QFN package. It features adjustable threshold detection with Pb-free construction for reliable power monitoring in multi-rail systems. Available in stock worldwide for industrial control, server power management, and embedded reset applications.

Microchip MCP23S18 is a 16-bit SPI I/O expander with 16 GPIO lines across 2 ports, operating at up to 10 MHz clock frequency. It features interrupt-on-change, programmable pull-ups, and open-drain interrupt output for flexible interface designs.

Microchip MCP3304-CI/P is a 13-bit successive approximation ADC with 4 differential or 8 single-ended SPI inputs and ±5 V analog input range in a 16-pin PDIP package. It offers a maximum conversion time of 6.19 µs and operates from a 5 V supply. Used in industrial data acquisition, sensor interfaces, and precision measurement systems.

Microchip MCP3304-BI/P is a 13-bit differential-input successive approximation ADC with 4 differential or 8 single-ended channels in a 16-pin PDIP package. It accepts analog inputs from -5 V to 5 V and communicates via an SPI-compatible serial interface for easy microcontroller integration. The device is suited for precision data acquisition, industrial sensing, and multi-channel measurement systems.

Microchip MCP19119-E/MQ is a programmable analog-based synchronous buck controller with integrated gate drivers and digital interface in a 28-pin QFN package. It supports wide input voltage ranges for point-of-load power conversion in servers, industrial equipment, and telecom power systems. TS 16949 screened with 6-week factory lead time for automotive and industrial applications.

MCP2510-I/P is a clock IC by Microchip. Key specs include Date Of Intro: 1999-06-07; Additional Feature: OPERATES AT 3V MINIMUM SUPPLY @ 16 MHZ. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

MCP3301-BI/SN is a 13-bit successive approximation ADC from Microchip accepting differential analog inputs from -5 V to +5 V with a maximum linearity error of 0.012207%, packaged in an 8-pin SOIC, well suited for precision industrial measurement and data acquisition front-ends.

Microchip Technology ATSAMD20E15A-AU, 32bit Microcontroller, 48MHz, 32 kB Flash, 32-Pin TQFP

The MCP23S08-E/ML is an 8-bit SPI I/O expander from Microchip providing 8 GPIO lines via a 10 MHz SPI interface. It operates in a compact QFN-20 package suitable for space-constrained PCB designs. Available in stock with worldwide shipping.

Microchip MCP3004-I/ST is a 10-bit successive approximation ADC with 4 channels, differential input support, and SPI interface in a 14-pin TSSOP package. It achieves a maximum conversion time of 2.78 µs and accepts analog inputs up to 5 V for versatile sensor acquisition. Available from stock worldwide with fast global shipping.

MCP3201-BI/P is an analog-to-digital converter by Microchip. Key specs include Analog Input Voltage-Max: 5.1 V; Analog Input Voltage-Min: -0.1 V. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

MCP23S09-E/MG is an 8-bit SPI-interface I/O expander from Microchip providing one 8-bit GPIO port with interrupt output and 10 MHz SPI clock support. It extends microcontroller GPIO count in a compact 16-pin QFN package, suited for keyboard scanning, relay control, and LED matrix driving.

The MCP2036-I/P is a single-function analog front-end IC designed for power-factor correction and PWM control applications, operating over a wide supply range and housed in a 14-pin DIP package. It integrates multiple analog functions to simplify PFC converter design with fewer external components.

Microchip MCP23S18T-E/MJ is a 16-bit SPI I/O expander with 16 GPIO lines across 2 ports, running up to 10 MHz. Features open-drain interrupt outputs and 25 mA sink capability per pin. Ideal for embedded systems needing extra GPIO via a simple 4-wire SPI bus.

PIC18F4620-E/P is a microcontroller by Microchip. Key specs include Bit Size: 8; CPU Family: PIC18. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

Microchip MCP2150-I/P is an IrDA standard serial infrared controller that handles all IrDA protocol layers from the physical layer to the IrDA Link Access Protocol (IRLAPHDL) in a single 18-pin PDIP IC. It interfaces via UART to a host microcontroller and manages 115.2 kbps IrDA communications, simplifying wireless data exchange in handheld and embedded devices.

Microchip MCP23S18-E/SP is a 16-bit SPI-interfaced I/O expander with two 8-bit GPIO ports, operating up to 10 MHz clock frequency. It features configurable interrupt outputs and programmable pull-ups on all 16 I/O lines, expanding microcontroller GPIO in embedded systems. Available in a 28-pin SPDIP package for through-hole prototyping and industrial applications.

Microchip MCP23016-I/SP is a 16-channel I2C I/O expander with two 8-bit ports, 400 kHz bus speed, interrupt output, and 2.7 V to 5.5 V supply in a 28-pin SPDIP package.

The MCP23S09-E/P is an 8-bit SPI I/O expander from Microchip providing 8 GPIO lines via a 10 MHz SPI interface. It operates from 1.8 V to 5.5 V and comes in an 18-pin DIP package, making it ideal for adding GPIO to space-limited or legacy-friendly microcontroller designs.

MCP1827-1202E/ET is a high-current fixed 1.2 V LDO linear regulator from Microchip capable of delivering 1.5 A output with only 0.33 V typical dropout voltage, accepting an input range of 2.3 V to 6 V in a 5-pin D2PAK package suited for board-level power supply designs.

MCP23009-E/SS is a clock IC by Microchip. Key specs include Clock Frequency-Max: 10 MHz; JESD-30 Code: R-PDSO-G20. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

MCP23018-E/SP is a 16-bit I/O expander from Microchip with I2C interface up to 10 MHz clock, providing two 8-bit GPIO ports in a 28-pin SPDIP package for expanding microcontroller I/O in embedded systems.

The MCP1826S-1802E/AB is a fixed 1.8 V, 1 A low-dropout linear voltage regulator with a typical dropout voltage of only 0.25 V, accepting input voltages from 2.3 V to 6 V and packaged in a TO-220-3 through-hole case. Its tight ±2% output accuracy and high current capability make it suitable for powering FPGAs, DSPs, and digital logic in embedded systems.

The MCP23009-E/MG is an 8-bit I/O expander from Microchip with I2C interface, supporting up to 10 MHz clock and 8 configurable I/O lines in a compact 16-pin QFN package. Features interrupt output and programmable pull-ups. In stock with worldwide shipping.

The MCP14E4-E/P is a dual 4 A peak MOSFET gate driver from Microchip with Schmitt trigger inputs and non-inverting/inverting outputs for flexible gate-drive topology. It operates from a 4.5 V to 18 V supply in an 8-pin PDIP package, suitable for through-hole switching power supply and motor-drive designs.

Microchip MCP23009-E/P is an 8-bit I/O port expander with I2C interface in an 18-pin PDIP package. It provides 8 independently configurable GPIO lines with interrupt-on-change and internal pull-ups operating up to 10 MHz clock. Extends microcontroller I/O capacity with minimal wiring overhead.

Microchip MCP1316MT-29ME/OT is a single-channel voltage supervisor with a 2.9 V reset threshold, watchdog timer, and reset input in a 5-pin SOT-23 package. It monitors supply rails with 0.174 V maximum threshold accuracy and provides reliable power-on reset and system watchdog for embedded microcontroller designs.

MCP1826S-3002E/AB is a voltage regulator by Microchip. Key specs include Dropout Voltage1-Max: 0.4 V; Dropout Voltage1-Nom: 0.25 V. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

MCP1804T-3002I/MB is a fixed 3 V, 150 mA LDO voltage regulator from Microchip supporting input voltages up to 28 V with a nominal dropout of 1.3 V. Packaged in a 3-pin SOT-89 for better thermal dissipation, it delivers ±2% accuracy and targets industrial and automotive supply rails requiring wide input range regulation.

The Microchip MCP1541-I/TO is a three-terminal series voltage reference producing a precise 4.096 V output with 1% initial accuracy in a TO-92-3 package. It operates up to a 7 V maximum input supply, making it compatible with 5 V systems needing a stable ADC reference. Ideal for 12-bit ADC calibration, data acquisition systems, and portable precision measurement instruments.

The MCP1827-ADJE/AT is an adjustable low-dropout (LDO) linear regulator from Microchip with a typical dropout voltage of 330 mV and up to 1.5 A output current. It features 0.16 %/V line regulation in a 5-pin TO-220-5 through-hole package suitable for benchtop power supplies and high-current regulated rail designs.

The MCP1725-3002E/SN is a 500 mA low-dropout LDO voltage regulator from Microchip that delivers a fixed 3.0 V output with ±2% accuracy from a 2.3 V to 6 V input. With a nominal dropout voltage of only 210 mV and a low quiescent current, it provides efficient and stable power regulation in an 8-pin SOIC package for portable and battery-operated systems.

QFN-72

MCP1826S-1202E/DB is a voltage regulator by Microchip. Key specs include Dropout Voltage1-Max: 0.4 V; Dropout Voltage1-Nom: 0.25 V. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

Microchip PIC32MM0064GPL020-I/SS is a 32-bit PIC32 microcontroller with 64 KB Flash, 25 MHz maximum clock, integrated ADC, and boundary scan in a compact 20-pin SSOP package for low-pin-count applications.