MCP6002-E/P Microchip Integrated Circuit (Dual-In-Line Packages) In Stock
Microchip MCP6002-E/P is a dual rail-to-rail input/output operational amplifier with 1 MHz gain-bandwidth product and 600 mV/µs slew rate, operating from 1.8 V to 6 V. It features 60 dB minimum CMRR and 4500 µV maximum offset voltage. Available in an 8-pin DIP package, suitable for low-voltage analog signal conditioning.
- Manufacturer
- Microchip
- Package
- Dual-In-Line Packages
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- MCP6002-E/P Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $0.1000(MOQ 1)
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Dual rail-to-rail input and output op-amp in a single 8-pin DIP package
- 1 MHz gain-bandwidth product for low-frequency signal processing
- Single-supply operation from 1.8 V to 6 V
- 60 dB minimum common-mode rejection ratio (76 dB nominal)
- 4500 µV maximum input offset voltage
- Voltage-feedback architecture with internal frequency compensation
Applications
The MCP6002-E/P is well suited for battery-powered sensor front ends, active filter stages, and signal amplification circuits where low supply voltage and rail-to-rail swing are essential. It is commonly found in portable medical instrumentation, consumer IoT devices, and analog interface circuits for microcontrollers operating from a single 3.3 V or 5 V supply.
Specifications
| Pbfree Code | Yes |
| Manufacturer Package Code | PDIP-8 |
| Factory Lead Time | 11Weeks |
| YTEOL | 9 |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Architecture | VOLTAGE-FEEDBACK |
| Common-mode Reject Ratio-Min | 60dB |
| Common-mode Reject Ratio-Nom | 76dB |
| Frequency Compensation | YES |
| Input Offset Voltage-Max | 4500 µV |
| JESD-30 Code | R-PDIP-T8 |
| JESD-609 Code | e3 |
| Low-Bias | NO |
| Low-Offset | NO |
| Micropower | YES |
| Number of Functions | 2 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | SOLCC8,.11,20 |
| Package Shape | RECTANGULAR |
| Package Style | IN-LINE |
| Packing Method | TUBE |
| Power | NO |
| Programmable Power | NO |
| Qualification Status | Not Qualified |
| Slew Rate-Nom | 0.6V/us |
| Supply Current-Max | 0.34mA |
| Supply Voltage Limit-Max | 7V |
| Supply Voltage-Nom (Vsup) | 5V |
| Surface Mount | NO |
| Technology | CMOS |
| Temperature Grade | AUTOMOTIVE |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | THROUGH-HOLE |
| Terminal Pitch | 2.54mm |
| Terminal Position | DUAL |
| Unity Gain BW-Nom | 1000 |
| Voltage Gain-Min | 25110 |
| Wideband | NO |
| Package | Dual-In-Line Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.01 |
| Country of Origin | Thailand |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for MCP6002-E/P:
suggested
suggested
Frequently Asked Questions
What supply voltage range does the MCP6002-E/P support, and does it work from a single-cell Li-ion battery?
The MCP6002-E/P operates from a single supply of 1.8 V to 6 V, making it compatible with a single-cell Li-ion battery (typically 3.0 V to 4.2 V). Its rail-to-rail input and output swing ensures maximum dynamic range at low supply voltages, which is critical for battery-powered sensor applications.
How does the CMRR specification of MCP6002-E/P affect measurement accuracy in differential sensing circuits?
The MCP6002-E/P provides a minimum common-mode rejection ratio of 60 dB (76 dB typical), which suppresses common-mode noise by at least 1000:1. In differential temperature, pressure, or bridge-sensor circuits, this level of CMRR keeps measurement error from supply ripple and electromagnetic interference well below the noise floor of typical 10-bit ADCs.
For a prototype or through-hole board, what package is the MCP6002-E/P available in?
The MCP6002-E/P comes in an 8-pin 0.300-inch wide PDIP-8 package, which is ideal for breadboard prototyping and through-hole PCB assembly. The -E suffix denotes the extended temperature range of -40°C to +125°C, and the part is RoHS-compliant (Pb-free). Factory lead time is approximately 11 weeks, so early procurement is recommended for volume builds.
When would a designer choose MCP6002-E/P over a higher-bandwidth op-amp for a sensor interface?
MCP6002-E/P with its 1 MHz gain-bandwidth product is the right choice when signal frequencies stay below a few hundred kHz and power budget is tight. Higher-bandwidth amplifiers typically consume more quiescent current; the MCP6002-E/P's low-power profile and 1.8 V minimum supply make it optimal for always-on sensor nodes where battery life matters more than bandwidth.
Related Guides
How to Choose a BAS70 Schottky Diode for Signal Clamping: Selection Guide
A practical BAS70KFILM and BAS70-family Schottky diode selection guide for signal clamping, RF detection, leakage, and topology choices.
Jul 4, 2026
AMC1202DWVR Design Guide for Isolated Current Sensing
Practical AMC1202DWVR design guide covering shunt sizing, isolation layout, input filtering, ADC scaling, and sourcing choices.
Jul 4, 2026
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $0.1000 | $0.10 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”