MCP4024T-502E/OT Microchip Integrated Circuit (SOT23 (5-Pin)) In Stock

MCP4024T-502E/OT is a non-volatile single-channel digital potentiometer from Microchip with 5 kΩ resistance, 64-position linear taper, 2-wire increment/decrement interface, and 2 kHz bandwidth in a miniature SOT-23-5 package, designed for compact calibration and trimming circuits.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
MCP4024T-502E/OTSOT23 (5-Pin)
Quick Facts
Manufacturer
Microchip
Package
SOT23 (5-Pin)
Pin Count
5
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $0.6255(MOQ 1)
Temp Range
-40.0°C to 125.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • Non-volatile memory retains wiper position across power cycles
  • 5 kΩ end-to-end resistance with 64-position linear taper
  • 2-wire increment/decrement serial control interface
  • 2 kHz bandwidth for audio and low-frequency signal control
  • Ultra-compact SOT-23-5 package (5 pins) for minimal PCB area
  • RoHS-compliant lead-free construction (JESD-609 e3)

Applications

MCP4024T-502E/OT is ideal for compact trimming and calibration circuits in portable consumer electronics, handheld instruments, and IoT sensor nodes where the wiper setting must survive power cycling without a microcontroller re-initialization routine. Its 2-wire interface and SOT-23-5 footprint also make it a drop-in solution for space-constrained PCBs in hearing aids, wearables, and miniature industrial transmitters.

Specifications

Pbfree CodeYes
Manufacturer Package CodeSOT-23-5
Factory Lead Time7Weeks
YTEOL8
Additional FeatureNONVOLATILE MEMORY
Bandwidth-Nom2kHz
Control InterfaceINCREMENT/DECREMENT
Converter TypeDIGITAL POTENTIOMETER
JESD-30 CodeR-PDSO-G5
JESD-609 Codee3
Number of Functions1
Number of Positions64
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeTSOP5/6,.11,37
Package ShapeRECTANGULAR
Package StyleSMALL OUTLINE, LOW PROFILE, SHRINK PITCH
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
Resistance LawLINEAR
Resistance Tolerance-Max20%
Resistor Terminal Voltage-Max5V
Screening LevelTS 16949
Supply Current-Max0.45mA
Supply Voltage-Nom5V
Surface MountYES
TechnologyCMOS
Temperature Coefficient-Nom150ppm/°C
Temperature GradeAUTOMOTIVE
Terminal FinishMatte Tin (Sn)
Terminal FormGULL WING
Terminal Pitch0.95mm
Terminal PositionDUAL
Total Resistance-Nom5000Ω
PackageSOT23 (5-Pin)

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCNEAR99
HTS Code8542.39.00.01
Country of OriginThailand

Datasheet

MCP4024T-502E/OT Datasheet Download

Official datasheet from Microchip

Alternate & Equivalent Parts

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

How does the non-volatile memory in MCP4024T-502E/OT benefit designs that must retain calibration settings across power cycles?

MCP4024T-502E/OT stores the current 64-position wiper setting in non-volatile memory, so the last programmed resistance value is restored automatically on power-up without any microcontroller intervention. This eliminates a re-calibration routine at each boot, reducing startup latency and simplifying firmware in battery-powered instruments, hearing aids, and portable sensor calibrators.

What bandwidth does MCP4024T-502E/OT support, and does that limit audio-frequency applications?

MCP4024T-502E/OT has a nominal bandwidth of 2 kHz, which covers the lower end of audio-frequency applications such as hearing aid volume control and low-frequency tone shaping up to 2000 Hz. For full-range audio applications above 2 kHz, designers should consider higher-bandwidth alternatives, but for speech intelligibility circuits the 2 kHz limit is generally adequate.

How does the SOT-23-5 package of MCP4024T-502E/OT compare to SOIC or TSSOP options in terms of PCB space savings?

The SOT-23-5 package of MCP4024T-502E/OT occupies roughly one-fifth the PCB area of an equivalent SOIC-8 digital potentiometer, with only 5 pins and a body measuring approximately 3 mm × 1.7 mm. This dramatic size reduction suits wearable devices, coin-cell powered sensors, and any compact embedded design where every square millimeter of board space is at a premium.

When should a procurement team choose MCP4024T-502E/OT over a volatile digital potentiometer with full SPI addressing?

MCP4024T-502E/OT is the better choice when the application needs the resistance setting to persist after power removal without a host MCU write at startup, and when 64 positions across 5 kΩ are sufficient resolution. The 7-week lead time and competitive pricing in SOT-23-5 also reduce BOM cost compared to larger SPI-addressed parts with EEPROM built-in.

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Microchip

Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.6255
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$1.1400$1.14
35+$1.0342$36.20
100+$0.8000$80.00
181+$0.7784$140.89
386+$0.7228$279.00
400+$0.6255$250.20
pcs
Unit price: $1.1400 · Total: $1.14

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.

SK
Sarah Kim
VP Engineering, NovaBit Electronics, South Korea