Analog Devices

Surge Suppressors 100V OV, UV and Reverse Supply Protection Controller with 32ms On Delay

LTC6262IDC#TRPBF is a dual general-purpose operational amplifier with rail-to-rail input and output, rated for ±2.625 V or 5.25 V single-supply automotive applications. It features 90 dB typical CMRR, 0.05 µA input bias current at 25°C, and comes in a compact 8-pin DFN with exposed pad for heat dissipation in automotive and industrial designs.

Analog Devices LTC1662IMS8 is a dual-channel 10-bit DAC with serial interface in an 8-pin MSOP package. It provides up to 5.494 V analog output and 0.39% maximum linearity error for precision voltage generation. Available from stock with worldwide shipping.

n Wide VIN Range: 4.5V to 140V (150V Abs Max) n Wide Output Voltage Range: 1V ≤ VOUT ≤ 60V n Low Operating IQ: 16μA (48VIN to 12VOUT and 3.3VOUT) n Adjustable Gate Drive Level Up to 10V n Optional Spread Spectrum Operation n Very Low Dropout: 100% Duty Cycle Operation n Low IQ in Dropout: 78µA (One Channel On) n RSENSE or Inductor DCR Current Sensing n Out-of-Phase Controllers Reduce Required Input Capacitance and Power Supply Induced Noise n Phase-Lockable Frequency (75kHz to 720kHz) n Programma

High Speed Operational Amplifiers Dual 400MHz, 2500V/us Op Amp

Analog Devices LTC6081IMS8#PBF is a dual precision CMOS operational amplifier with 300 µA supply current, 90 µV maximum input offset, 88 dB minimum CMRR, and rail-to-rail output in an 8-pin MSOP package. It operates from 2.7 V to 12 V single supply or ±1.35 V to ±6 V dual supply. From $3.50 in stock with worldwide shipping.

LTC6652BHMS8-1.25#PBF is a precision low-drift 1.25 V voltage reference from Analog Devices in an MSOP-8 package with ±0.1% output tolerance and low temperature coefficient. Provides stable reference voltage for high-accuracy ADC and DAC applications. Available from stock worldwide with competitive pricing.

Analog Devices LTC6904MPMS8#TRPBF is a serial-port programmable oscillator covering 1 kHz to 68 MHz in an 8-pin MSOP package, with output-enable control and 1 ns maximum fall time. Supplied on tape and reel. Available from stock with worldwide shipping.

LT8300IS5#PBF is a micropower isolated flyback DC/DC converter with an integrated 150 V, 260 mA switch supporting up to 100 V input. It operates in current-mode burst control, delivering isolated bias supplies in a compact SOT-23-5 package for industrial and high-voltage applications.

1-Channel Single ADC Pipelined 3Msps 14-bit Parallel 44-Pin MQFP T/R

LDO Voltage Regulators 200mA Negative Vout LDO

D/A Converter, 1 Func, Parallel, Word Input Loading, 0.035us Settling Time, PDSO28

Digital to Analog Converters - DAC 16-Channel, 16-Bit, 10V VOUT SoftSpan DACs with 10ppm/ C Max Reference

Digital to Analog Converters - DAC 16-Channel, 16-Bit, 10V VOUT SoftSpan DACs with 10ppm/ C Max Reference

V-Ref Precision 1.25V 10mA Automotive 8-Pin MSOP Tube

The LTC6362HMS8#PBF is a single rail-to-rail input/output differential op-amp from Analog Devices in an 8-Pin MSOP package. It operates from ±2.625V or 5.25V supply with 98 dB typical CMRR and 73 dB minimum. Automotive-grade part ideal for precision signal conditioning with worldwide availability.

Analog Comparators 280MHz CMOS Comparator with Latch, Output Supply and Shutdown

SP Amp DIFF AMP Dual 5.25V 20-Pin LGA Tray

Instrumentation Amplifiers R-R Input/Output Inst Amplifier

Operational Amplifiers - Op Amps 140V RROut CMOS Op Amp

The LTC6904HMS8#TRPBF is a programmable silicon oscillator from Analog Devices covering 0.001 MHz to 68 MHz with a square-wave output and output-enable function. It is AEC-Q100 automotive-grade, housed in an MSOP-8 package, and features a 1 ns maximum fall time for clean digital clock generation. Suitable for automotive control units, industrial timing, and portable equipment where a compact, I2C-programmable clock source is required.

LTC6811HG-2#PBF is an automotive-grade multicell battery stack monitor and balancer capable of measuring 12 series-connected battery cells with high accuracy. It features a daisy-chainable isoSPI interface for multi-IC battery management systems. Suitable for EV battery packs, energy storage systems, and industrial multi-cell Li-Ion battery management.

Programmable Delay Block -40°C to 85°C Automotive 6-Pin TSOT-23 T/R

Battery Management PMU:BATCharger&Gauge Boost/LED, 3xLDO

The LTC4417HGN#PBF is a prioritized triple PowerPath controller from Analog Devices, managing up to 3 power input channels over a 2.5 V to 36 V range with adjustable OV/UV thresholds at 1 V reference, in a 24-pin SSOP package.

RS-232 Interface IC Complete Isolated RS232 uModule Transceiver + Power

Analog Devices LTC2909CTS8-5 is a dual-channel automotive-grade under/overvoltage supervisor with 3 active-low open-drain outputs in an 8-pin TSOT-23 package. It monitors 2 supply rails with adjustable thresholds and operates over -40°C to +125°C. Available from stock worldwide with fast shipping.

Analog Devices LTC4151CMS-1#PBF is an 80 V high-side power monitor IC with a split SDA I2C interface for current and voltage measurement. It provides single-channel monitoring with an integrated 12-bit ADC for accurate power consumption reporting. Housed in a 10-lead MSOP package for compact power monitoring designs.

LDO Voltage Regulators COM/I&I require low noise LDO w/ 4A rati

Digital to Analog Converters - DAC Single Unipolar 16-bit Unbuffered Vout DACs

Multiplexer Switch ICs LOW VOLTAGE QUAD 2/1 MUX

The LTC4417CUF#PBF is a prioritized triple PowerPath controller managing three power inputs from 2.5V to 36V with automatic switchover based on adjustable OV/UV thresholds. It seamlessly selects the highest-priority valid supply, controlling three external P-channel MOSFETs for near-lossless power routing. Housed in a 24-pin QFN package for compact redundant-power and multi-source energy management designs.

The LTC1867LACGN#PBF is a micropower 16-bit 8-channel SAR ADC from Analog Devices sampling at up to 175 ksps per channel with a 3 V supply and SPI interface in a 16-pin SSOP package. It achieves 0.0046% maximum linearity error and a 3.7 µs maximum conversion time, ideal for precision data acquisition. Available in stock worldwide for portable and industrial measurement systems.

Op Amp Dual Precision Amplifier R-R I/O 5.5V Automotive 8-Pin MSOP Tube

Analog Devices LTC6813ILWE-1 is a high-accuracy 18-cell battery stack monitor with daisy-chain interface for multi-cell BMS. It measures up to 18 series cells with 16-bit ADC resolution and ±1.2mV accuracy. Available in a 64-pin LQFP package for EV and energy storage systems.

Switching Voltage Regulators 75mA Sync Boost Converter w/out Disconnect

ADV7401 is a 10-bit multiformat SDTV/HDTV video decoder and RGB graphics digitizer from Analog Devices, supporting component, composite, and S-Video inputs with integrated analog-to-digital conversion at up to 14-bit oversampling. In a QFP package, it targets set-top boxes, video processing systems, and professional broadcast equipment.

Digital Potentiometer ICs Dual 8-Bit I2C Dig POT

LT1793AIN8#PBF is a single general-purpose op-amp in an 8-pin PDIP package rated to ±20 V supply. Features 10 pA bias current, 99 dB CMRR, and 78 dB minimum CMRR for precision signal conditioning. From $3.50 in stock worldwide shipping.

Supervisory Circuit with Manual Reset, Active-Low Open-Drain and Active-High Push-Pull Reset Outputs

LINEAR TECHNOLOGY - LTC1149CN#PBF - IC, SWITCHING REG ADJ, 1149, DIP16

GaAs MMIC SMT VOLTAGE-VARIABLE ATTENUATOR, DC - 8 GHz

The LTC6907IS6#TRPBF is a micropower resistor-programmable oscillator from Analog Devices covering 40 kHz to 4 MHz in a compact 6-pin SOT-23 package. A single external resistor sets the output frequency, making it ideal for low-power portable and embedded timing circuits.

The LTC6904HMS8#PBF is an automotive-grade programmable silicon oscillator from Analog Devices spanning 0.001 MHz to 68 MHz squarewave output in an 8-pin MSOP package. It includes an output enable function and achieves 1 ns maximum fall time for clean high-speed clock distribution.

Current Sense Amplifiers HV Bidirectional Current Sense Amp Engineered for Pin FMEA

SENSOR ANALOG 0C-70C 6DFN

Current Sense Amplifiers HV Bidirectional Current Sense Amp Engineered for Pin FMEA

Analog to Digital Converters - ADC 100ksps 16-Bit ADC 0V to 4V

Current Sense Amplifiers High Volt Current Sense Amplifier

LTC6363HMS8-1#PBF is a precision, low-power differential amplifier and ADC driver from Analog Devices with 35 MHz bandwidth and 100 dB typical CMRR. It operates with a maximum bias current of 0.1 µA and is packaged in an 8-pin SOIC, ideal for driving high-resolution ADCs in data acquisition and instrumentation systems.