Analog Devices

LED Lighting Drivers 60V Synchronous Boost LED Conrtoller

Voltage References Micropower Prec 2.5V Auto Qualified

LDO Voltage Regulators Ultra Low Noise, High PSRR #Negative LDO

Low IQ Boost/SEPIC/Inverting Converter with 4A, 60V Switch

Ultracompact SC70 and SOT-23 packages Low temperature coefficient: 75 ppm/°C (maximum) Pin compatible with LM4040/LM4050 Initial accuracy: ±0.1% No external capacitor required Wide operating current range: 50 µA to 15 mA Extended temperature range: −40°C to +125°C Qualified for automotive applicationse

Clock Generator 0MHz to 250MHz-IN 2400MHz-OUT 64-Pin LFCSP EP T/R

LINEAR TECHNOLOGY - LT3066EDE-5#PBF - LDO, FIXED, 5V, 0.5A, DFN-12

Analog to Digital Converters - ADC 24-Bit Over-Sampling ADC with Configurable Digital Filter

Analog Devices LTC2666IUH-16#PBF is an octal 16-bit SoftSpan DAC with ±10 V output range, 10 ppm/°C maximum reference drift, and serial SPI input in a 32-pin QFN package. It delivers precision multichannel analog output for industrial process control, automated test, and data acquisition systems.

Digital Isolators 7 Ch. Isolator for SPI Interface

Switching Voltage Regulators [Tin-Lead SnPb BGA] 20V, 15A Step-down Module Regulator with remote sense

IC PWR SWITCH 1:1 16SOIC

Power Switch ICs - Power Distribution 5V 3A Logic Cntrlld Hi-Side Pwr Sw

The LT3066EMSE-5#PBF is a fixed 5 V output LDO linear voltage regulator from Analog Devices supporting 1.8 V to 45 V input range with 0.5 A output current and 0.3 V typical dropout voltage in MSOP-12 package. From $3.50 in stock with worldwide shipping.

Linear Voltage Regulator IC Positive Adjustable 1 Output 500mA 8-LFCSP-WD (3x3), 19.45V(Max) , -40°C to +125°C

Video Amplifiers 40 MHz DC Gain Controller Amplifier

Analog Devices LTC4041IUFD#PBF is a supercapacitor backup power manager capable of sourcing up to 2.5 A to power a system load during primary power failure. It automatically charges the supercapacitor stack from the main supply and monitors voltage thresholds for seamless switchover. Packaged in a 24-pin QFN for compact power management integration.

RF DEMOD IC 50MHZ-525MHZ 40LFCSP

Operational Amplifiers - Op Amps High Speed Buffer Op Amp Single High Output Current Amplifier ±22V/44V 8-Pin DFN EP T/R

The LT1672CMS8#PBF is a precision rail-to-rail input/output operational amplifier from Analog Devices with 2 µA supply current and 120 dB typical CMRR. It features ultra-low bias current of 1 nA maximum and minimum gain of 5 V/V. Available in the 8-Pin MSOP package for compact precision amplifier designs.

Precision Amplifiers HV Chop.Stab.OA w/Int Caps

The LTC6269IMS8E-10#PBF is a dual precision automotive-grade operational amplifier with rail-to-rail output, operating from ±2.625 V to ±5.25 V supplies in an 8-pin MSOP-EP package. It provides a typical 77 dB common-mode rejection ratio and ultra-low 20 fA input bias current at 25°C for high-accuracy signal conditioning. Available from Analog Devices with worldwide distribution.

Current Sense Amplifiers High Voltage, Zero-Drift current Sense Amplifier

Analog Devices LTC4316CMS#PBF is a single-channel I2C and SMBus address translator that remaps slave device addresses on the fly to resolve conflicts in multi-sensor systems, housed in a 10-pin MSOP package. Transparently shifts all 7-bit addresses by a configurable XOR offset without requiring firmware changes. Ideal for multi-board systems, hot-swap applications, and designs with duplicate I2C device addresses.

The LT6275IMS8#PBF is an Analog Devices dual 90 MHz, 2200 V/µs low-power operational amplifier in an MSOP-8 package, featuring 110 dB CMRR and 0.5 µA bias current at 25°C. Combines wide bandwidth with low quiescent current for precision signal-chain designs. Available from stock with worldwide shipping.

Analog Devices LTM2892IY-I is a µModule 6-channel I2C digital isolator with reinforced galvanic isolation, housed in a compact BGA-24 package. It supports I2C clock rates up to 400 kHz and provides 2500 V isolation between domains. Available from stock worldwide with lead-free RoHS-compliant construction.

LDO Voltage Regulators 20V 200mA LDO 2.5Vo

Programmable Delay Block -40°C to 125°C Automotive 6-Pin TSOT-23 T/R

Digital to Analog Converters - DAC 12-Bit I2C Quad DAC (1.25V Reference)

RF Detector 6GHz RMS Power Detector with 12-Bit Serial Output ADC

Analog Devices LTC2865IDE#PBF is a full-duplex RS-422/RS-485 line transceiver with selectable 20 Mbps or 250 kbps data rates and 60 V fault protection, in a 12-pin DFN package. It integrates a separate 3.3 V or 5 V logic supply input with differential Schmitt-trigger receivers for robust industrial bus communication. Available from stock with worldwide shipping.

High Speed Operational Amplifiers 250mA Out, 900V/us, 60MHz CFA

Precision Amplifiers 14MHz Single Supply Quad Prec OA

Analog Devices LTC2865HMSE#PBF is a full-duplex RS-422/RS-485 line transceiver with selectable 20 Mbps or 250 kbps data rates and ±60 V bus fault protection, in a 12-pin MSOP package. It includes a separate logic supply pin for 3.3 V or 5 V compatibility and differential Schmitt-trigger receivers for robust noise immunity. Available from stock with worldwide shipping.

Analog Devices LT1389B is an ultra-low-power nano-power 2.5 V precision voltage reference with 0.05% initial accuracy and two-terminal SOT-23/SOIC-8 interface. It draws under 6 µA quiescent current for always-on battery systems. Available in stock worldwide with competitive pricing.

SOIC-28

LT3062EDCB-5#TRMPBF is a 5 V fixed-output LDO regulator from Analog Devices in 8-pin DFN package, delivering 200 mA from up to 45 V input with 0.3 V typical dropout and output discharge. Available with worldwide shipping.

Switching Voltage Regulators CHARGE PUMPED INVERTER W/SHUTDOWN I.C.

Analog to Digital Converters - ADC 16-bit 30Hz Delta Sigma ADC in 2x2 DFN

RF Amplifier Distributed Amp

20 V, 500 mA, Low Noise, CMOS LDO

Analog Devices LT1672CMS8#TRPBF is a precision rail-to-rail input and output operational amplifier with only 2 µA supply current, available in an 8-pin MSOP package. Features 98 dB min CMRR and rail-to-rail I/O for maximum dynamic range. Available on tape and reel from stock worldwide with fast shipping.

The LTC2944CDD#TRPBF is an automotive-grade Li-Ion battery gas gauge IC with coulomb counting, voltage and temperature measurement, and adjustable alert thresholds in an 8-pin DFN package. Available in stock with worldwide shipping.

The LTC6702CDC#TRPBF is a dual low-voltage micropower comparator from Analog Devices featuring push-pull outputs, 5 mV maximum input offset voltage, and a compact 8-pin DFN package, well-suited for battery-powered threshold detection, window comparator, and level-translation circuits.

Analog Comparators SOT-23, 44V, Over-The-Top, uP, Prec R2R

Battery Management Micropower USB Power Manager with Li-Ion Charger and Two Step Down Regulators

Analog Comparators SOT23, 44V, uP, Over-The-Top Comparator

Operational Amplifiers - Op Amps High Speed Buffer

Use the download button to access the LTC5549IUDB#TRMPBF schematic symbol, PCB footprint, and 3D model.

Power Management Specialized - PMIC Ideal Diode Bridge Controller