Analog Devices

Operational Amplifiers - Op Amps High Speed Buffer Op Amp Single High Output Current Amplifier ±22V/44V 8-Pin DFN EP T/R

The LT1672CMS8#PBF is a precision rail-to-rail input/output operational amplifier from Analog Devices with 2 µA supply current and 120 dB typical CMRR. It features ultra-low bias current of 1 nA maximum and minimum gain of 5 V/V. Available in the 8-Pin MSOP package for compact precision amplifier designs.

Precision Amplifiers HV Chop.Stab.OA w/Int Caps

The LTC6269IMS8E-10#PBF is a dual precision automotive-grade operational amplifier with rail-to-rail output, operating from ±2.625 V to ±5.25 V supplies in an 8-pin MSOP-EP package. It provides a typical 77 dB common-mode rejection ratio and ultra-low 20 fA input bias current at 25°C for high-accuracy signal conditioning. Available from Analog Devices with worldwide distribution.

Current Sense Amplifiers High Voltage, Zero-Drift current Sense Amplifier

Analog Devices LTC4316CMS#PBF is a single-channel I2C and SMBus address translator that remaps slave device addresses on the fly to resolve conflicts in multi-sensor systems, housed in a 10-pin MSOP package. Transparently shifts all 7-bit addresses by a configurable XOR offset without requiring firmware changes. Ideal for multi-board systems, hot-swap applications, and designs with duplicate I2C device addresses.

The LT6275IMS8#PBF is an Analog Devices dual 90 MHz, 2200 V/µs low-power operational amplifier in an MSOP-8 package, featuring 110 dB CMRR and 0.5 µA bias current at 25°C. Combines wide bandwidth with low quiescent current for precision signal-chain designs. Available from stock with worldwide shipping.

Analog Devices LTM2892IY-I is a µModule 6-channel I2C digital isolator with reinforced galvanic isolation, housed in a compact BGA-24 package. It supports I2C clock rates up to 400 kHz and provides 2500 V isolation between domains. Available from stock worldwide with lead-free RoHS-compliant construction.

LDO Voltage Regulators 20V 200mA LDO 2.5Vo

Programmable Delay Block -40°C to 125°C Automotive 6-Pin TSOT-23 T/R

Digital to Analog Converters - DAC 12-Bit I2C Quad DAC (1.25V Reference)

RF Detector 6GHz RMS Power Detector with 12-Bit Serial Output ADC

Analog Devices LTC2865IDE#PBF is a full-duplex RS-422/RS-485 line transceiver with selectable 20 Mbps or 250 kbps data rates and 60 V fault protection, in a 12-pin DFN package. It integrates a separate 3.3 V or 5 V logic supply input with differential Schmitt-trigger receivers for robust industrial bus communication. Available from stock with worldwide shipping.

High Speed Operational Amplifiers 250mA Out, 900V/us, 60MHz CFA

Precision Amplifiers 14MHz Single Supply Quad Prec OA

Analog Devices LTC2865HMSE#PBF is a full-duplex RS-422/RS-485 line transceiver with selectable 20 Mbps or 250 kbps data rates and ±60 V bus fault protection, in a 12-pin MSOP package. It includes a separate logic supply pin for 3.3 V or 5 V compatibility and differential Schmitt-trigger receivers for robust noise immunity. Available from stock with worldwide shipping.

Analog Devices LT1389B is an ultra-low-power nano-power 2.5 V precision voltage reference with 0.05% initial accuracy and two-terminal SOT-23/SOIC-8 interface. It draws under 6 µA quiescent current for always-on battery systems. Available in stock worldwide with competitive pricing.

SOIC-28

LT3062EDCB-5#TRMPBF is a 5 V fixed-output LDO regulator from Analog Devices in 8-pin DFN package, delivering 200 mA from up to 45 V input with 0.3 V typical dropout and output discharge. Available with worldwide shipping.

Switching Voltage Regulators CHARGE PUMPED INVERTER W/SHUTDOWN I.C.

Analog to Digital Converters - ADC 16-bit 30Hz Delta Sigma ADC in 2x2 DFN

RF Amplifier Distributed Amp

20 V, 500 mA, Low Noise, CMOS LDO

Analog Devices LT1672CMS8#TRPBF is a precision rail-to-rail input and output operational amplifier with only 2 µA supply current, available in an 8-pin MSOP package. Features 98 dB min CMRR and rail-to-rail I/O for maximum dynamic range. Available on tape and reel from stock worldwide with fast shipping.

The LTC2944CDD#TRPBF is an automotive-grade Li-Ion battery gas gauge IC with coulomb counting, voltage and temperature measurement, and adjustable alert thresholds in an 8-pin DFN package. Available in stock with worldwide shipping.

The LTC6702CDC#TRPBF is a dual low-voltage micropower comparator from Analog Devices featuring push-pull outputs, 5 mV maximum input offset voltage, and a compact 8-pin DFN package, well-suited for battery-powered threshold detection, window comparator, and level-translation circuits.

Analog Comparators SOT-23, 44V, Over-The-Top, uP, Prec R2R

Battery Management Micropower USB Power Manager with Li-Ion Charger and Two Step Down Regulators

Analog Comparators SOT23, 44V, uP, Over-The-Top Comparator

Operational Amplifiers - Op Amps High Speed Buffer

Use the download button to access the LTC5549IUDB#TRMPBF schematic symbol, PCB footprint, and 3D model.

Power Management Specialized - PMIC Ideal Diode Bridge Controller

Switching Voltage Regulators LT3433 - High Voltage Step-Up/Step-Down DC/DC Converter

20 V, 500 mA, Low Noise, CMOS LDO

20 V, 500 mA, Low Noise, CMOS LDO

3.0 V to 5.5 V, ±12 kV IEC ESD Protected, Half Duplex 500 kbps RS-485 Transceiver

3.0 V to 5.5 V, ±12 kV IEC ESD Protected, Half Duplex 500 kbps RS-485 Transceiver

40 V, 200 mA, Low Noise, CMOS LDO Linear Regulator

Interface - I/O Expanders 10 GPIO/Key Controller

LINEAR TECHNOLOGY - LTC2050HS6#PBF - OP AMP, 6V, 3MHZ, 2V/US, 5TSOT23

RF Mixer GaAs MMIC I/Q Mixer / IRM Chip 22 - 32

Switching Voltage Regulators Micropower High Output Current Step-Up Adjustable and Fixed 5V DC/DC Converters

20 V, 500 mA, Low Noise, CMOS LDO

Low Voltage 1.15 V to 5.5 V, 4 Channel, Bidirectional, Logic Level Translator

High Speed Operational Amplifiers G=1 STABLE V-FDBK OP AMP

The LT1720IMS8#TRPBF is a dual high-speed voltage comparator from Analog Devices operating on 3V or 5V single supply. It delivers 7 ns propagation delay with push-pull output and maximum 4.5 mV input offset voltage. Available in an 8-lead MSOP package in tape-and-reel format with RoHS-compliant PBF finish.

Analog Devices LT1720CMS8 is a dual high-speed comparator with push-pull outputs operating from 3 V or 5 V supplies in an MSOP-8 package. It delivers 4.5 ns propagation delay with 6 µA input bias current and 4.5 mV maximum offset voltage. Available from stock worldwide with fast shipping.

RS-232 Interface IC 1.8V-5V 2D+2R 250kbps RS232 Transceiver

Op Amp Single Low Noise Amplifier ±15V 8-Pin(7+Tab) DDPAK T/R

LDO Voltage Regulators Ultra Low Noise, High PSRR #Negative LDO −300 mA, Ultralow Noise, High PSRR, Low Dropout Linear Regulator