Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
11,416
Total Products
25
Categories
All Analog Devices Components
Showing 4,701–4,750 of 11,416
RF Detector
LTC6244CMS8#PBF is a dual precision 50 MHz CMOS op-amp with rail-to-rail output and 75 fA input bias current. It delivers 105 dB CMRR and 225 µV maximum offset voltage in an 8-pin MSOP for precision signal-conditioning circuits.
HMC189AMS8ETR-AN is a passive SMT frequency doubler from Analog Devices operating over a 2 GHz to 4 GHz input frequency range, producing a doubled output at 4 GHz to 8 GHz in a compact 8-lead MSOP package. It requires no DC bias, simplifying integration into microwave signal chains for radar, test equipment, and communications systems. In stock worldwide with fast shipping.
IC CLOCK SYNTHESIZER PLL 40QFN
RS-422/RS-485 Interface IC Complete Isolated RS485/RS422 uModule Transceiver + Power
IC DAC 16BIT SPI 20LFCSP
Analog Devices LTC4357HMS8#PBF is a positive high-voltage ideal diode controller in an 8-pin MSOP package. It drives an external N-channel MOSFET to emulate a low-loss ideal diode, supporting supply voltages up to 100 V. Available from stock with worldwide shipping.
Precision Amplifiers 2x 1.6V, 1 A Prec R2R In & Out Op Amp
The LTM4661EY#PBF is a boost DC/DC switching regulator from Analog Devices in a compact 25-ball BGA package. It delivers up to 4A output current with adjustable output voltage from 2.5V to 15V. Supports input voltage range of 0.7V to 5.5V with current-mode PWM control for stable operation.
Analog to Digital Converters - ADC 12-bit, 250ksps ADC in MSOP
LTC6244HVCMS8#PBF is a high-speed CMOS operational amplifier with rail-to-rail output, 50 MHz bandwidth, and 2.8 V to 6 V supply range. It delivers 80 dB CMRR minimum and ultra-low 0.000075 µA bias current. Available in 8-pin MSOP package from Analog Devices with worldwide shipping.
EV1HMC1094LP3 is an evaluation board for the HMC1094LP3 GaAs MMIC divide-by-2 prescaler IC from Analog Devices. It supports input frequencies up to 14 GHz with single-supply operation at 3.3 V. From $50 in stock with worldwide shipping.
IC REG CTRLR BUCK/BOOST 28QFN
RF Development Tools HMC546MS8G 1960 MHz Eval PCB
Switching Voltage Regulators 1.5A 200kHz High Voltage Step-down Regulator
IC LED DRVR RGLTR DIM 1A 28TSSOP
The LT1999CMS8-50F#PBF is a high-voltage bidirectional current sense amplifier from Analog Devices engineered for pin FMEA compliance with 105 dB typical CMRR and 1.5 mV maximum offset voltage. It supports current-feedback architecture with 50x gain in an 8-pin MSOP package for robust current monitoring applications. Available worldwide for motor drives, power converters, and industrial current sensing designs.
Precision Amplifiers High Voltage, Low Noise, Zero Drift Operation Amplifier
14-Bit, 500ksps Serial Sampling ADC in TSOT
OP2177ARZ-REEL7 Analog Devices, Op Amps, 1.3MHz 100 kHz, 8-Pin SOIC
Analog Devices LTC3410BESC6#TRMPBF is a synchronous step-down switching regulator delivering 300 mA output current at 2.25 MHz switching frequency, operating from a 2.5 V to 5.5 V input in a 6-pin SC70 package. Current-mode PWM control ensures fast transient response for noise-sensitive portable and IoT applications.
Rail-to-Rail Output 215MHz, 1.1nV/√Hz Op Amp/SAR ADC Driver
LTC2846CG#PBF is a multiprotocol line transceiver IC from Analog Devices supporting EIA-232, EIA-422, EIA-530, V.35, and X.21 standards from a 3.3 V supply in a 36-pin SSOP package. Key specs include differential Schmitt trigger inputs, 3-bit driver output, and compatibility with V.10, V.11, V.28, V.35, V.36 interface standards for industrial communications. Available from stock with worldwide shipping.
LTC6240HVHS8#PBF is a precision CMOS operational amplifier featuring 18 MHz gain-bandwidth product, rail-to-rail output swing, and ultra-low input bias current of 0.0025 µA. It offers 83 dB minimum CMRR and 450 µV maximum input offset voltage. Ideal for precision signal conditioning, sensor interfaces, and battery-powered instrumentation applications.
High Speed Operational Amplifiers Dual, 80MHz R-to-R In/Out Precision OA
LDO Voltage Regulators Ultra-Low Noise 200mA LDO
LTC6752HSC6-4#TRMPBF is a 280 MHz CMOS comparator from Analog Devices with a separate output supply pin, SOT-23-6 package, and 8.5 mV maximum input offset. Delivers high-speed single-supply comparison for demanding signal detection tasks. Available from stock worldwide with competitive pricing.
Precision Amplifiers 1x 18MHz, L N, R2R Out, CMOS Op Amp
DAC 16-CH Delta-Sigma 24-bit Automotive 80-Pin LQFP Tray
LTC3588EDD-2#TRPBF is a piezoelectric energy harvesting power supply IC by Analog Devices in a 10-pin DFN package. Key specs: single-channel input with adjustable threshold, integrated rectifier and buck converter for regulated output. Available in stock with worldwide shipping.
ANALOG DEVICES - HMC1119LP4ME - RF ATTENUATOR, 100MHZ-6GHZ, 24DBM, LFCSP
The LT3042EDD#TRPBF is an ultralow-noise, ultrahigh PSRR RF linear regulator from Analog Devices delivering 200 mA with only 0.22 V typical dropout and adjustable output up to 20 V. It achieves 0.8 µVRMS output noise (10 Hz to 100 kHz) and greater than 76 dB PSRR at 1 MHz, making it ideal for noise-sensitive RF and precision analog circuits. Supplied in a compact 10-pin DFN package for space-efficient board layouts.
LCC-14
Standard Clock Oscillators 32.768kHz to 8.192MHz Prec Pwr Oscs
Capacitance to Digital Converter 0.09ksps 24bit Automotive 16-Pin TSSOP T/R
LTC1665CN is a micropower octal 8-bit DAC providing 8 independent analog output channels with serial binary input and up to 5.478 V maximum output voltage in a 16-pin DIP package. It achieves 0.39% maximum linearity error with ultralow power consumption. Designed for programmable bias generation, multichannel waveform synthesis, and portable instrumentation requiring multiple simultaneous analog outputs.
IC REG CTRLR FLYBACK 16SSOP
Monostable Multivibrator One Shot with Rising Edge Trigger, Non-Retriggerable
Power Management Specialized - PMIC
The LTC5562IUC#TRMPBF is a low-power wideband active RF mixer from Analog Devices, covering 0.03 MHz to 7 GHz with a 50 Ω characteristic impedance and 15 dBm maximum CW input power. Offered in a compact QFN package, it is designed for frequency translation in wireless infrastructure, radar, and software-defined radio systems.
Hot Swap Controller 1-CH 80V N-Channel Positive High Voltage Automotive 8-Pin MSOP Tube
LTC2057HMS8#TRPBF is a high-voltage zero-drift chopper-stabilized operational amplifier from Analog Devices with 150 dB typical CMRR and ultra-low 0.0002 µA bias current at 25°C. It delivers precision low-noise performance for demanding measurement and signal conditioning applications. Available worldwide through authorized Analog Devices distributors.
Surge Suppressors Low Quiescent Current Surge Stopper with Adjustable Clamp and Retry
Switching Voltage Regulators Synchronous Flyback Controller
The LTM4616EY#PBF is a dual-output DC-DC step-down µModule regulator from Analog Devices. It accepts 2.7V to 5.5V input and delivers two independently adjustable 0.6V to 5V outputs at up to 8A each. Available in a compact 144-pin BGA package for space-constrained power systems.
Current Sense Amplifiers High Voltage, Bidirectional Current Sense Amplifier
SP Amp DIFF AMP Single R-R O/P ±5V/10V 10-Pin MSOP T/R
Analog to Digital Converters - ADC 1 channel 12bit SAR ADC, ref (typ), SPI
High Speed Operational Amplifiers LoNoise-LoPower R/R Op Amp Dual
The LTC6754ISC6#TRMPBF is a single LVDS output comparator from Analog Devices with a totem-pole output stage and 7.5 mV maximum input offset voltage. It targets high-speed data conversion, clock distribution, and signal detection in compact SOT-23-6 packaging.
Need Analog Devices Components?
Get competitive quotes from authorized China distributors
Request a Quote